Printer Parts

Revo™ HeaterCore (With 104NT Thermistor) Includes:Heater cartridge/thermistor (1pcs)Spring (1 pcs)Silicone boot (1 pcs) Notes: Choose the correct voltage and wattage for your application.Before installing please read the HeaterCore wiring...

Revo Heatsink for Voron Includes: Heatsink (1pcs)Fits:Voron 1 Voron TridentVoron SwitchwireVoron 2.4Voron LegacyVoron 0.1  

Revo™ Hemera Upgrade Kit (with fully loaded nozzle kit) Voltage: 12 volt  Nozzle Size: 0.25, 0.40, 0.60, 0.80 (1 each)  This kit includes a Hemera heatsink with a revised design that’s compatible with a Revo...

Revo High Flow, High Temp Abrasive (HF HT-A) Nozzle HF HT-A nozzles are high-temperature, high flow, abrasion-resistant nozzles. Much like ObXidian, these nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the...

Revo Starter Pack - 24 Volt  Note 1:  Please take care when making your product selection.The 104NT (E3D) comes with an E3D 104NT thermistor.The 100K (Creality) comes with a Creality specific HeaterCore and is not compatible with other...

Revo High Flow or High Flow X Hotside Pack - 24 Volt, 60 Watt  Note:  These hotsides come with an integrated E3D 104NT thermistor. Make sure this is the correct thermistor for your printer before ordering. This is not a...

Revo™ Micro - with Fully Loaded Nozzle Kit Voltage:  24 volts  Nozzle Size:  0.25, 0.40, 0.60 and 0.80mm  (one of each size) Kit includes:1 x Heatsink  1 x M12 x 1.5 nut1 x Fan 2010  5...

Revo™ Micro - with Single Nozzle Voltage:  24 volt  Nozzle Size:  0.40mm  Kit includes:1 x Heatsink  1 x M12 x 1.5 nut1 x Fan 2010  5 volt 1 x Regulator board - 24V to 5V1 x...

Revo™ ObXidian Nozzles The Revo ObXidian is specifically designed for printing fibre-filled polymers. ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the...

Heatsink for Revo™ Six Includes:Heatsink (1 pcs)Collet (1 pcs)Collet clip (1 pcs)

Revo™ Six - with Fully Loaded Nozzle Kit Voltage:  12 volt  Nozzle Sizes:  0.25, 0.40, 0.60 and 0.80mm  (one of each size) The Revo Six is a drop-in replacement for your E3D V6 Hotend, giving you all the benefits...

Revo™ Silicone Sock Pack Includes:Yellow (2 pcs)Red (2 pcs)Blue (2 pcs)Green (2pcs)HeaterCore socks (2pcs) Fits: E3D Revo Nozzles and HeaterCore

Revo™ Spring Triple Pack Includes: Revo spring (3 pcs) These retention springs clip onto your Revo HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo...

Revo™ Voron with Fully Loaded Nozzle Kit Voltage: 12 volt  Nozzle Sizes: 0.25, 0.40, 0.60 and 0.80mm  (one of each size) E3D developed this Revo-compatible hotend kit in collaboration with Team Voron. It’s intended...

Ribbon Cable - Uptown to Downtown Board  Includes: Cable (1 pcs) Fits:Robo R2Robo C2

  Microswiss Wear-Resistant Nozzle with M6 Threads This M6 thread, Robo 3D style nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers...

Alps Alpine Rocker Switch - 10 A at 250 VAC Includes: Rocker switch (1 pcs) MFG Part Number: SDDJE12400 Datasheet

Roller Wheel (X/Y Carriage Roller Wheel) Includes: Wheel with Bearings (1 pcs) Fits: SV07SV07 Plus

Artillery Roller Wheel (Also Called a POM Wheel) Used on the X axis carriage Includes: Wheel with Bearings (1 pcs) Fits: Sidewinder X1Sidewinder X2Sidewinder X3 ProGeniusGenius Pro

E3D Roto Extruder with Sensor Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market. The sensor adds filament monitoring, an action...