Printer Parts

Complete Hotend Assembly for X1 and X1C Includes: Hotend (1 pcs)Heater (1 pcs)Thermistor (1 pcs)Retaining clip (1 pcs)Thermal grease (1 sachet)Silicone sock (1 pcs)M3*14 screws (2 pcs) Max Printing Temp: 320 ℃ Fits: Bambu...

  Please read our returns policy regarding electronic items Finder 3 Control Board (Mainboard) This is the control board that is located behind the touch screen.  Includes: Control board (1 pcs) Fits: Finder 3 Note: This is not...

Please see our return policy regarding electronic items Control board for Prusa MMU2S Replacement control board. This has the MMU2S firmware pre-installed. Includes: Control board with MMU2S firmware (1 pcs) Fits: MMU2SMMU3 To...

Hotend Cooling Fan for X1 and X1C The Hotend Cooling Fan is used to cool and reduce the temperature of the ceramic heater. The cooling fan has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The circuit...

Hotend Cooling Fan for P1 Series The Cooling Fan for Hotend is used to cool and reduce the temperature of the ceramic heater. The cooling fan for hotend has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The...

PB Select™ Copper Heat Break Copper and stainless steel Includes: Heat Break (1 pcs) Fits:CR-7CR-8SCR-9SCR-10miniCR-10CR-10SCR-10 V2CR-10 V3CR-10 S4CR-10 S5CR-100CR-100BCR20CR20...

PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...

PB Select CopperBlock™ Heater Block Nickel composite coated copper increases thermal conductivity.  Includes: Heater block (1 pcs)Set screw (1 pcs)Clamping screw (1 pcs) Specifications:Plating: Nickel CompositeMax Temperature:...

CopperBlock™ Hot Block This Volcano style heater block is compatible with E3D thermistor cartridges and high temperature, high accuracy PT100 temperature sensors. Includes:  Heater block (1 pcs)Set screw (1 pcs)Clamping screw (2...

CopperBlock™ Hot Block for Prusa MINI Nickel composite coated copper hot block for increased thermal conductivity.  Includes:Copper heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+ Note: After...

Coupler 5mm Includes: Coupler (1 pcs) Fits: Prusa MMU3 Note: Set screw not included To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Cover for Tool Battery Adapter  Fits: Makita compatible battery adapter        

Cover for Tool Battery Adapter  Fits: MilWalt battery adapter.

DC Power Cable with 5.5mm x 2.1mm Male Barrel Plug Specs Max current: 3A Red Connector: Center Pole Black Connector: Outer Pole Material: PVC Barrel Plug Size: 5.5 x 2.1mm Wire Length:100cm/39''(approx)    

Panasonic Automotive Relay 20A 24VDC 1 FORM A BRACKET Manufacturer: Panasonic Coil Voltage: 24 VDC Relay Contact Form: 1 Form A (SPST-NO) Contact Current Rating: 20 A Coil Resistance: 320 Ohms Coil...

DC Barrel Plug with Cord Plug: 5.5x2.1mm - Right Angle  Wire: 22AWG Wire Length: 1.5 Meter    

Adjustable DC-DC  Boost Converter XL6009 Module These boost converters are great to use in conjunction with our power tool battery adapters. Includes: XL6009 Converter (1 pcs) Specifications:Input Range: 3V - 32VOutput Range: 5V -...

DDX Adapter For Copperhead™ Screw Mount To use with: Bondtech DDX Direct Drive eXtruder for Creality This set is necessary to install a Copperhead™ hotend with screw mount heat sink on a DDX Upgrade Kit

DDX Adapter For Microswiss All-Metal Use a Microswiss All Metal hotend with the Bondtech DDX. Part is SLS printed in PA12 (Nylon) Requires DDX extruder v2 or later. This part is necessary to install a Microswiss All Metal hotend on a DDX Direct...

DDX Adapter Set For Creality Ender-3 / CR-10 Note: Does not fit DDX V3 This set is necessary to install a DDX Upgrade Kit on the models listed below. Fits: Ender-3 CR-10 CR-10S CR-10 S4 CR-10 S5 Requires your printer to have a 40x40x10mm...