PolyMide™ PA6-GF Glass Fiber Reinforced Nylon - 1.75mm | Polymaker

Polymaker PolyMide™ PA6-GF (glass fiber reinforced nylon)

PolyMide™ is a family of nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to nylon and ease of printing.

PolyMide™ PA6-GF is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.

Color: Gray
Diameter: 1.75mm
Weight: 500g

Note: Use a wear resistant nozzle

Print Settings
Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different printers and nozzle diameters.

Nozzle: 280˚C – 300˚C
Bed: 25˚C – 50˚C (Do NOT exceed 50˚C)
Fan Speed: Off
Print Speed: 30mm/s – 60mm/s
Print Surface: Almost any surface with a thin coat of PVA glue or  DimaFix
Drying Settings: 100˚C for 8h
Recommended Support Materials: PolyDissolve™ S1

Notes: 
Annealing settings: 80˚C for 6h

Mechanical Properties
Young’s Modulus: 4431 ± 184 (MPa)
Tensile Strength: 84.5 ± 2.1 (MPa)
Bending Strength: 136.4 ± 1.6 (MPa)
Charpy Impact Strength: 16.5 ± 0.5 (kJ/m2)

Thermal Properties
Heat Deflection Temperature (ISO 75 1.8 MPa): 157 ˚C
Heat Deflection Temperature (ISO 75 0.45 MPa): 191 ˚C
Melting Temperature: 215 (°C)