ReForm rPET by Formfutura - Orange, 1.75mm, 1kg

• Affordable, sustainable PETG Filament
• Same formulation as Formfutura HDglass
• 100% upcycled/recycled filament
• Less environmental impact by quality controlling and re-using extrusion waste stream
• Sustainable packaging
• Easy to print

ReForm rPET Filament Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: ≥ 0.15mm    

Print Temp: ± 200-240° C

Bed Temp: ± 65 - 75° C    

Print Speed: High

Fan Speed: 30-100%

Flow Rate: ± 110%

Retraction: Yes, ± 6mm

Print Surface: BuildTak, Kapton Tape. Use DimaFix Pen, if needed.