ReForm rPLA - Moss Grey - 1.75mm 750g | Formfutura - Clearance*

*Clearance item - no returns

Formfutura ReForm rPLA 

Color: Moss Gray
Diameter: 1.75mm
Weight: 750g

ReForm rPLA is an upcycled PLA (with the same formulation as Formfutura's EasyFil PLA) that has less environmental impact.

Made from "residual extrusion waste streams which are re-compounded and homogenized," ReForm rPLA is affordable and sustainable, while still producing the high quality prints you need with the ease you expect from Formfutura. 

ReForm rPLA Print Settings
These settings from Formfutura are meant as a starting point to help find your optimal print settings. However, you may need to experiment outside these ranges.
Nozzle size: ≥ 0.15mm
Print Temp: ± 180 - 220° C
Bed Temp: ± 0 - 60° C
Print speed: Medium
Fan speed: 50-100%
Flow Rate: ± 100%
Retraction: Yes, 5mm
Print Surface: BuildTak, Kapton Tape, Glass or PEI