SV07 Plus

Build Plate Heater for SV07 Plus Includes: Aluminum bed heater (1 pcs)Magnetic sheet - installed on bed heater (1 pcs) Fits: SV07 Plus Note: Does not include build plate/print surface or mounting hardware.

Heater Block (Hot Block) Includes: Heater block (1 pcs) Fits: SV06 PlusSV07SV07 Plus Note: Does not include any installation hardware.

Hotend Heater Cartridge Heats the hotend Includes: Heater (1 pcs) Fits:SV06SV06 PlusSV07SV07 Plus

Hotend Assembly for SV06 Plus, SV07/Plus Includes: Heat break (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermistor (1 pcs)Silicon sock (1 pcs)M2.5x10 socket head cap screws (2 pcs)0.40mm nozzle (1 pcs) Fits: SV06 PlusSV07SV07 Plus

LED Light (PCB Board) for Extruder Aluminates the part being printed.  Includes: Led light board(1 pcs) Fits: SV07SV07 Plus

Mainboard (Motherboard) for Sovol SV07 Plus This silent mainboard comes with firmware loaded. Includes: Mainboard (1 pcs) Fits: SV07 Plus

Nylon Mounting Pins for Extruder LED Light Nylon fasteners for mounting the LED light board to the extruder cover. Includes: Nylon pins (3 pcs) Fits: SV07SV07 Plus

Noga Teddy Burr - TB1000 Deburring tool (3D Print Cleanup Tool) The TB1000 is a high quality deburring tool with 8 mm painted hexagonal aluminum handle and N1 blade. Great for post production of 3D prints. Blade is replaceable. The Teddy Burrs has...

Brass High Flow Nozzle Includes: Nozzle (1 pcs) Size: Choose above  For: 1.75mm diameter filament Fits: SV06 PlusSV07SV07 Plus

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Hardened Steel High Flow Nozzle Set Made of hardened steel for printing abrasive filaments.  Includes: 0.40mm Nozzle (2 pcs)0.60mm Nozzle (2 pcs)0.80mm Nozzle (1 pcs)1.00mm Nozzle (1 pcs) Sizes: 0.40mm  0.60mm  0...

3D Print Cleanup Tool - RB1000 Deburring Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as...

Roller Wheel (X/Y Carriage Roller Wheel) Includes: Wheel with Bearings (1 pcs) Fits: SV07SV07 Plus

Silicone Sock Includes: Silicone sock (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Stepper Motor Includes: Motor (1 pcs) Fitment Locations:X or Y axis on the SV06X/Y or Z Axis on the SV07X or Z axis on the SV07 PlusX axis on the SV06 Plus Fits: SV06 (X/Y axis)SV06 Plus (X axis) SV07 (X/Y/Z axis)SV07...

Stepper Motor for Y Axis Includes: Motor (1 pcs) Location: Y Axis Fits: SV07 Plus

Super Lube® 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality grease...

Super Lube® 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease. Includes: 1...

Hotend Thermistor Includes: Thermistor (1 pcs) Fits:SV06SV06 PlusSV07SV07 Plus