SV08

Retaining Clip for Heater Block This clip holds the heater and thermistor in place on the heater block. Includes: Clip (1 pcs) Fits: SV08

Hotend Heater Cartridge Heats the hotend Includes: Heater (1 pcs) Fits: SV08

Hotend Air Duct Set Directs airflow to the part being printed Includes: Front air duct (1 pcs)Rear air duct (1 pcs) Fits: SV08 Note: The front air duct comes in two separate pieces. Carefully snap them together before installation.

Hotend Assembly for SV08 Includes: Heat break (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermistor (1 pcs)Silicon sock (1 pcs)M3x15 socket head cap screws (2 pcs)M2.5x30 socket head cap screws (1 pcs)0.40mm nozzle (1 pcs) Fits: SV08

2515 Axial Fan - 24 Volt This is the fan that cools the hotend heatsink.  Includes: Fan (1 pcs) Specifications:Size: 25x25x15mmVoltage: 24vdcRPM: 15000Wires: 3 Fits:Sovol ZeroSovol SV08Sovol SV08 Max

LCD Control Screen for SV08 and Sovol Zero Includes: LCD screen (1 pcs)Rotary Knob (1 pcs) Fits: Sovol ZeroSV08

Mainboard (Motherboard) for Sovol SV08 This silent mainboard comes with firmware loaded. Includes: Mainboard (1 pcs) Fits: SV08

Noga Teddy Burr - TB1000 Deburring tool (3D Print Cleanup Tool) The TB1000 is a high quality deburring tool with 8 mm painted hexagonal aluminum handle and N1 blade. Great for post production of 3D prints. Blade is replaceable. The Teddy Burrs has...

Nozzle and Heater Block Assembly for SV08 Each Assembly Includes: Heater block (1 pcs)Nozzle of selected size (1 pcs) Note: Does not include heater, thermistor, silicone sock or clip.  Fits: SV08

Power Supply Unit Includes: Power supply unit (1 pcs) Specs: Power Output: 150WOutput Voltage: 24V Fits: Sovol ZeroSovol SV08Sovol SV08 MaxSovol T300

Proximity Sensor Switch for SV08 Attaches to the extruder and is used for Z height and bed leveling. Includes: Sensor switch (1 pcs) Fits: SV08T500

3D Print Cleanup Tool - RB1000 Deburring Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as...

Silicone Sock Includes: Silicone sock (1 pcs) Fits: SV08

Smooth Idler Pulley for X/Y Axis This is the smooth idler pulley for the X/Y axis belt. Includes: Smooth pulley (1 pcs) Fits: Sovol SV08  Important  This is only one pulley, the printer uses multiple pulleys, order the quantity...

Bottom Stepper Motor (Z Axis) Includes: Stepper motor (1 pcs) Location:  Bottom Fits: SV08

Left Side Stepper Motor (X/Y Axis) Includes: Stepper motor (1 pcs) Location: Left side Fits: SV08

Right Side Stepper Motor (X/Y Axis) Includes: Stepper motor (1 pcs) Location: Right side Fits: SV08

Super Lube® 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality grease...

Hotend Thermistor Includes: Thermistor (1 pcs) Fits: SV08