Description
Bambu Cool Plate SuperTack Flexible Build Plate
SuperTack coating provides ultra-strong adhesion to PLA and PETG filaments, even at lower heatbed temperatures. It enhances printing success by eliminating adhesion issues, reduces warping when printing large objects.
Reliable surface adhesion
Durable coating for long-lasting performance
Natural texture seamlessly hides the bottom surface
Designed for PLA and PETG
Includes: Build Plate (1 pcs)
Fits:
Bambu Lab P1 Series
Bambu Lab X1 Series
Bambu Lab A1 (does not fit the A1 mini)
Recommended bed temperature with PLA: 45℃
WARNING Do NOT print with TPU filament, as it will damage the build plate.
How to remove prints from SuperTack
(The instruction below shows you how to remove the prints without damaging the coating)
Use the scraper included with your printer to gently lift the print, then pry it off carefully.
If the print is sticking too tightly, heat the plate on the heatbed to 50°C to assist with removal.
Considerations
- The surface is soft. Be careful when using a scraper to remove printed parts.
- Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.
- Before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle. The coating in the special-designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime, so there is no need to worry about any quality issues.
- Bambu Cool Plate SuperTack is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.
- SuperTack provides good adhesion without adhesive or frequent cleaning. You can clean the surface with water and detergent if heavy dirt appears. Do NOT use organic solvents (especially acetone) to clean the build plate, as it will damage the SuperTack surface.
- Bambu PLA Silk material exhibits strong adhesion on the SuperTack build plate, which may damage printed models. Therefore, we do not recommend using Bambu PLA Silk material on the SuperTack build plate. For users printing with third-party PLA Silk materials, please select the Generic PLA Silk preset in Bambu Studio and evaluate material compatibility based on the specific conditions.
Installation Steps
Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you
Step 2: Lower the plate and secure to the magnetic platform
Additional Information
Category Filter: |
Print Surface & Build Plate Parts |
Brand Name: |
Bambu Lab |
Fits: |
Bambu Lab |
