Clearance

*Clearance item, no returns 12V Dual Ball Bearing 25mm Fan 25x25x10mm12 volt3.64 CFMMolex Micro-Fit 3.0 style connector2 bolts included - mount directly to your Slice Mosquito or Mosquito Magnum hotend Fits: Slice Mosquito Hotend  

*Clearance item - no returns  Extension Cable, Stepper Motor PH to Dupont 4 (No Latch). Approximately 2 meter longNema 17 stepper motor 6-pin PH connector to Dupont 4-pin connector. The default wiring for this extension cable is listed...

*Clearance item, no returns Cable - Stepper Motor PH6 to XH2.54 - 4 pin | 1 meter Approximately 1 meter long Nema 17 stepper motor 6-pin connector to XH2.54 4-pin connector The default wiring for this extension cable is listed below...

*Clearance item, no returns Cable - Stepper Motor PH to XH2.54 - 4 pin | 2 meter Approximately 2 meter longNema 17 stepper motor 6-pin connector to XH2.54 4-pin connector The default wiring for this extension cable is listed below. You may...

 *Clearance Item - no returns Connector Cable for PB Select heater cartridge.  Includes: Cable (1 pcs) Length: 865mm Note: the connector on this cable has side tabs for installing in a housing (see picture), however the tabs are not needed...

2 Meter Cable for Revo HeaterCore Heater Line  Length: 2 Meter (+/- 1cm) Fits: E3D Revo 24v HeaterCore Note: Photo for representation purposes only and may not match product exactly.

*Clearance item - no returns Flexible Magnetic Build Plate - Single Sided Smooth PEI Sheet Made from heavy gauge flexible steel with smooth PEI on one side.  Includes:Build plate (1 pcs)Sheet magnet with adhesive backing (1 pcs) To use1. Remove...

  *Clearance item, no returns   Flexible Magnetic Build Plate - Single Sided Textured PEI Powder Coated Made from heavy gauge flexible steel and powder coated PEI on one side. The Powder coating gives the surface a distinct textured...

*Clearance item - no returns Grove Mount Adapter for Mosquito Hotend This mount attaches directly to your Mosquito Hotend and will allow it to be mounted to a Bondtech QR, BMG or anywhere an E3D style hotend would mount. Use with Direct or Bowden...

*Clearance item - no returns Heater Block for Sensor Cartridges This Volcano Compatible heater block allows you to use E3D thermistor cartridges, as well as a high temperature, high accuracy PT100 temperature sensors. Compatible with E3D/RepRap...

*Clearance item - no returns Replacement Heater Block Includes: Heater Block (1pcs) Set screw (1 ps) Screw for holding thermistor in place (1pcs) Fits: Creality CR-10-S5 Creality CR-10-S4 Creality CR-10S Creality CR-10 MINI Ender...

*Clearance item - no returns RepRap Heatsink - 1.75mm Thread Mount Fits: RepRapE3D V6 style heatbreaks

Aluminum Heatsink These are generally used on 2208/2209 stepper drivers.  Size: 15x14.5x13 Color: Blue Self Adhesive: Yes Includes: Heatsink (1 pcs)

*Clearance item - no returns Aluminum Heatsink Size: 9x9x12 Color: Black Adhesive back: Yes 5 Pack

*Clearance item - no returns Heatsink for Stepper Drivers Aluminum heatsink to remove heat from desired component.Self-adhesive on the back for easy attachment. Includes: Heatsink (5 pcs) Dimensions: 8.8 x 8.8 x 5 mm (+/- .15mm)

*Clearance item, no returns PB Select™ Hemera Compatible Stainless Steel Heat Break For 1.75mm Filament Includes: Heat Break (1 pcs) Note: After changing hotend parts, a PID tune is recommended. 

*Clearance item - no returns PB Select™ High Flow Brass Nozzle (Volcano Compatible) Includes: Nozzle (1 pcs) Size:  1.00mm  Fits:E3D Volcano (for 1.75mm)Anycubic KobraAnycubic Kobra MaxAnycubic VyperArtillery Sidewinder...

*Clearance item - no returns PB Select™ High Flow Brass Nozzle (Volcano Compatible) Includes: Nozzle (1 pcs) Size:  1.20mm  Fits:E3D Volcano (for 1.75mm)Anycubic KobraAnycubic Kobra MaxAnycubic VyperArtillery Sidewinder...

*Clearance item - no returns NTC 3950 Thermistor NTC 3950 100K ohm Max temp: 260c Type: Glass Bead Cable Length: 1 Meter total Connector: Dupont (2 pin)  

PB Select™ Prusa PSU Holder Nut - 2 Pack  *Clearance Item - no returns Nickel plated M3nE nut. Used to secure the PSU to the t-slot rail. Includes: M3nE Nut (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MK4MINIMINI+ To replace this part, please...