E3D & Compatible

E3D Prusa Specific Titanium Heat Break Similar to the heat break that comes stock on many Original Prusa 3D printers, but these are titanium for lower thermal transfer to the coldside. Includes: Prusa specific titanium heat break (1...

E3D Prusa Specific Heat Break Depending on availability we get these from E3D or Prusa ResearchThis is the heat break that comes stock on many Original Prusa 3D printers. Includes: Prusa specific heat break (1 pcs) Fits:MK2MK2SMK2.5MK2...

E3D Heat-Break - Kraken/Chimera - 1.75mm Heatbreak for the Kraken. This is also used in the Chimera, but is different from the Cyclops heat break. Please Note: Sold in units of 1 (For a Chimera, you will need 2. For a Kraken, you will need 4)

Slice Engineering Copperhead™ Heat Break for RepRap 3D Printers Bimetallic Heat Break™ -  W2S (Tungsten Disulfide) plated stainless steel and copper alloyRated to 450 °C For more documentation on the...

PB Select™ All Metal Heat Break Includes: Heat break (1 pcs) For 1.75mm filament only Fits:E3D V6 hotendE3D Volcano hotendRepRap hotendPrusa MK2/3 (all variants without MMU)INTAMSYS FUNMAT HT

PB Select™ Titanium Alloy Heat Break for RepRap and E3D V7 Style Hotend Includes: Heat break (1 pcs) Low thermal conductivityHelps eliminate heat creepTitanium creates a sharper thermal cutoff for a more consistent extrusion Extremely smooth...

PB Select™ Heater Block Includes:Machined aluminum heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MK2Prusa MK2.5Prusa MK2.5SPrusa MK3Prusa Mk3SPrusa MK3S+E3D V6RepRap

  Heater Extension Cable Length: 1 meter Fits: E3D Revo HeaterCore

PB Select™ 24 Volt, 50 Watt Heater Cartridge Includes: Heater cartridge (1 pcs) Specifications:Volts: 24Watts: 50Amps: 2.92Size: 6x20mmLeads: 1000mmMax Temperature: 310c

Premium Heater Cartridge Includes: Heater (1 pcs) Specifications: Volts: 24Watts: 60Amps: 2.50Size: 6x15mmLeads: Silicone - 1000mmMax Temperature: 320c  

Premium Heater Cartridge Includes: Heater (1 pcs) Specifications: Volts: 24Watts: 70Amps: 2.92Size: 6x20mmLeads: Silicone - 1000mmMax Temperature: 320c  

High Precision E3D Heater Cartridge Purpose-made 40W heater cartridge for E3D HotEnds. These aren’t the same as the low-quality parts often seen in clones and have a considerably higher internal build quality. The high precision heater...

E3D Heater Cartridge Purpose-made 40W heater cartridge for E3D HotEnds. These aren’t the same as the low-quality parts often seen in clones and have a considerably higher internal build quality. Includes: Heater (1...

Heater Cartridge - 12v 40w This premium heater cartridge provides consistent heating throughout the cartridge for better heat distribution to the heater block. Includes: Heater (1 pcs) Use BN Paste for even more efficiency and to extend service...

Heater Cartridge This premium heater cartridge has a middle connector for easy replacement and provides consistent even heating throughout the cartridge for better heat distribution to the heat block. Includes: Heater (1 pcs)Extension cable (1...

Heater Cartridge - 24v 40w This premium heater cartridge provides consistent heating through the cartridge for better heat distribution to the heater block. Includes: Heater (1 pcs) Use BN Paste for even more efficiency and to extend service life...

Revo™ HeaterCore for Creality Sprite - 24 volt This is a special Revo HeaterCore intended for use with the Revo Sprite. It uses a 40W heater and a 100K NTC thermistor, which has the same response as a stock Creality thermistor, saving...

  E3D Universal V6 1.75mm Heat Sink with Collet Designed to work with both Bowden and Direct Drive Hotends Includes:Heat sink for 1.75mm V6 Hotends (1 pcs)Collet with blue clip (1 pcs) Fits:E3D V6 HotendPrusa MK2/2.5/SPrusa MK3/S/S+

*Clearance item, no returns PB Select™ Hemera Compatible Titanium Heat Break (1.75mm) Incudes: Heat Break (1 pcs) Fits: Hemera Extruder Note:For 1.75mm filament onlyAfter changing hotend parts, a PID tune is recommended. 

E3D Hemera Idler Kit Idler kit for the E3D Hemera.