Other Parts

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

Bearing - Titan/Titan Aero Extruder Replacement Titan/ Titan Aero bearings with an upgraded lubricant to increase the lifespan of your extruder.  These bearings are sealed so there is no need for additional lubrication. Specifications:ID: 5mmOD:...

608ZZ Roller Bearing A nice quality roller bearing with metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 8mmOD: 22mmW: 7mm

623ZZ Roller Bearing A nice quality roller bearing from E3D. Metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 3mmOD: 10mmW: 4mm Fits: Hemera (motor/heatsink)

624ZZ Roller Bearing A nice quality roller bearing with metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 4mmOD: 13mmW: 5mm

625ZZ Roller Bearing A nice quality roller bearing with metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 4mmOD: 13mmW: 5mm

626ZZ Roller Bearing A nice quality roller bearing with metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 6mmOD: 19mmW: 6mm

MR95ZZ  Bearing for Titan and Titan Aero Extruder Includes: Bearing (2 pcs) Specifications:ID: 5mmOD: 9mmW: 3mmMR95ZZABEC 5 Fits: TitanTitan Aero

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

E3D Collet Clip Only fits this collet for 4 mm PTFE Tube. Includes: Collet clip (2 pcs) FitsE3D V6E3D Revo SixE3D Revo MiniE3D CRPrusa Bondtech

  E3D Thermistor Cartridge  Cartridge type Semitec 104NT thermistor suitable for all E3D (and other) hotends using a cartridge type heater block. Includes: Thermistor (1 pcs) Specs:Max temperature: 300°CCartridge diameter:...

  E3D Dual Ball Bearing Fan - 30mm 12v These fans have the E3D seal of approval. Use for E3D HotEnds, Extruders or anywhere else you need a good quality ball bearing fan. Include: Fan (1 pcs) Specs:Size: 30x30x10mmVoltage: 12 VDCAmps: 0.10Wire...

E3D Hotend Fan - Ball Bearing - 30mm 24v These fans have the E3D seal of approval. Use for E3D HotEnds, Extruders or anywhere else you need a good quality ball bearing fan. Includes: Fan (1 pcs) Size: 30x30x10mmVoltage: 24 VDCLeads: 1mConnector: 2...

  E3D Dual Ball Bearing Fan - 40mm 12v These fans have the E3D seal of approval. Use on the E3D Titan Aero or anywhere else you need a good quality ball bearing fan. Includes: Fan (1 pcs)Extension cable (1...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

E3D 4mm Push Fit Collet (Collar) High quality replacement push fit collet with metal teeth. These are the small collets that fit E3D V6 and Prusa heatsinks. Includes: Collet (1 pcs)  Size:ID: 4mmOD: 5mm Fits: Bondtech ExtrudersE3D V6...

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK4Prusa XL Note: These are hex head set screws, not torx head (torx head is what comes standard on the MK4 and...

  Stepper Motor Cable A spare E3D Stepper motor cable for use with E3D extruder motors and general-purpose motion system motors. Includes: Cable (1 pcs) Length: 1 meter

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Thermistor/Fan Extension Cable 1 meter thermistor/fan connector cable, red and black color coded for devices which have a polarity (e.g. fans). Includes: Cable (1 pcs) Length: 1 meterConnector 1: Molex Microfit (used on all our fans,...