Fans

Fans

We only carry high quality ball-bearing 3D printer fans for long life from known brands like Sunon and Delta  

  • On Sale
    25mm Fan for Mosquito Hot End - 12v

    25mm Fan for Mosquito Hot End - 12v

    PB3D

    Now: $6.99
    Price: $7.99
    12V Dual Ball Bearing 25mm Fan for Slice Mosquito Hotend 12 volt (find the 24 volt fan here)  3.64 CFM Molex connector Hardware included - mount directly to your Slice Mosquito or Mosquito Magnum hot end
    SKU:
    PBX-FAN-J24B2510H-12-B
    Now: $6.99
    Price: $7.99
  • 25mm Slice Engineering fan

    25mm Fan for Mosquito Hot End - 12v | Slice Engineering

    Slice Engineering

    Price: $8.95
     Slice Engineering Fan for Mosquito Hot End Fits: the Slice Mosquito Hot End and Mosquito Magnum (hardware included) 25mm 12 volt (find the 24 volt fan here) 3.64 CFM  Molex™ Micro-Fit connector
    SKU:
    SLICE-FAN-12V
    Price: $8.95
  • On Sale
    Fan for Mosquito Hotend

    25mm Fan for Mosquito Hot End - 24v

    PB3D

    Now: $6.99
    Price: $7.99
    24V Dual Ball Bearing 25mm Fan for Slice Mosquito Hotend 24 volt (find the 12 volt fan here)  3.64 CFM Molex connector Hardware included - mount directly to your Slice Mosquito or Mosquito Magnum hot end 
    SKU:
    PBX-FAN-J24B2510H-24-B
    Now: $6.99
    Price: $7.99
  • MakerGear 12v Extruder Fan 40x10mm for M2

    40x10mm 12v Fan | MakerGear

    MakerGear OEM

    Price: $15.00
    Replacement Extruder Fan 40x10mm, 12 volt for your MakerGear M2 3D printer This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against...
    SKU:
    MG-EXTFAN-4010-12
    Price: $15.00
  • MakerGear Extruder Fan 40x10mm

    40x10mm 24v Extruder Fan | MakerGear

    MakerGear OEM

    Price: $15.00
    Replacement Extruder Fan 40x10mm, 24 volt for your MakerGear M2/M3 3D printer This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against...
    SKU:
    MG-EXTFAN-4010-24
    Fits:
    M2
    Fits:
    M3-SE
    Fits:
    M3-ID
    Price: $15.00
  • Orion Ball Bearing Fan 4010 24v

    40x10mm Cooling Fan - 24v 0.07amps | Orion Fans

    Orion

    Price: $11.95
    Orion Ball Bearing Cooling Fan - 24v 0.07amps  Size: 40*10mm Bearing Type: Ball Bearing Air Flow: 5.0 CFM Noise: 14.0dB RPM: 4200 Current: 0.07A Wire Leads: 2 Wire Lead Length: 275mm Lifetime @ Temp: 60000 Hrs @ 45c Approvals: cURus,...
    SKU:
    PBX-FAN-4010-ORION
    Price: $11.95
  • MakerGear Extruder Fan 40x10mm

    40x10mm MakerGear M3 Extruder Fan | PBX Parts

    PB3D

    Regular Price: $15.00
    Price: $12.95
    Replacement Extruder Fan 40x10mm, 24 volt for your MakerGear M2/M3 3D printer This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against...
    SKU:
    PBX-MG-EXTFAN-24
    Regular Price: $15.00
    Price: $12.95
  • 40x40x15 24v Fan

    40x15mm 24V Axial Fan - 14.8cfm | DELTA™

    Delta Electronics

    Price: $18.00
    Note: If you are upgrading your MakerGear printer with this fan, you will need these connectors DELTA Long Life Brushless Ball Bearing Axial Fan - 24 volt 40X40X15MM 12 inch wire leads 24 volt 14.8 CFM 0.601 in H2O Static...
    SKU:
    DELTA-4015-24V-148CFM
    MPN:
    AFB0424SHB
    Price: $18.00
  • MakerGear bed fan

    40x15mm 24v M3 Bed Fan | MakerGear

    MakerGear OEM

    Price: $15.00
    24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in. All fans should be kept free of dust buildup to prevent failure.     
    SKU:
    MG-BEDFAN-4015-24
    Fits:
    M3-SE
    Fits:
    M3-ID
    Price: $15.00
  • MakerGear bed fan

    40x15mm MakerGear M3 Bed Fan | PBX Parts

    PB3D

    Regular Price: $15.00
    Price: $12.95
    24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in.  Fits: All MakerGear M3s    
    SKU:
    PBX-MG-BEDFAN-24
    Regular Price: $15.00
    Price: $12.95
  • MakerGear 12 Volt Extruder Fan 50x50x10

    50x10mm 12v M2 Extruder Fan | MakerGear

    MakerGear OEM

    Price: $15.00
    M2 Replacement Extruder Fan 50x50x10mm, 12 volt for your MakerGear M2 3D printer Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm fan provides users with greater control over the cooling rate of extruded...
    SKU:
    MG-EXTFAN-5010-12
    Price: $15.00
  • Fan for MakerGear M2 Dual

    50x10mm 24v M2 Dual Extruder Fan | MakerGear

    MakerGear OEM

    Price: $15.00
    M2 Dual Replacement Extruder Fan 50x10mm - 24v for your MakerGear M2 Dual 3D printer This fan has longer leads to accommodate the M2 Dual 3D Printer Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm...
    SKU:
    MG-EXTFAN-5010-24-DUAL
    Price: $15.00
  • MakerGear Extruder Fan 50x50x10 12 Volt

    50x10mm 24v M2 Extruder Fan | MakerGear

    MakerGear OEM

    Price: $15.00
    M2 Replacement Extruder Fan - 50x50x10mm, 24 volt Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm fan provides users with greater control over the cooling rate of extruded filament material. This fan has a...
    SKU:
    MG-EXTFAN-5010-24
    Price: $15.00
  • E3D 3010 12 volt Fan

    Fan - 30mm 12v | E3D

    E3D

    Price: $6.99
    E3D Heatsink/Hotend Fan - 30mm 12v Specs: Size: 30x30x10mm Voltage: 12v Amps: 0.10 Wire Length: 1000mm (+/- 10mm) Connector: Dupont 2 pin Ball Bearings: Yes - Dual
    SKU:
    E3D-FAN-3010-12
    Price: $6.99
  • E3D 4010 12 volt Fan

    Fan - 40mm 12v | E3D

    E3D

    Price: $6.99
    E3D Fan - 40mm 12v Fits: E3D Titan Aero (or can be used on other 12v printers) Comes with 1 meter cable
    SKU:
    E3D-FAN-4010-12
    Price: $6.99
  • E3D 4010 24 volt Fan

    Fan - 40mm 24v | E3D

    E3D

    Price: $6.99
    E3D Fan - 40mm 24v Fits: E3D Titan Aero (or can be used on other 24v printers) Comes with 1 meter cable
    SKU:
    E3D-FAN-4010-24
    Price: $6.99
  • INTAMSYS FUNMAT HT V1 replacement heatbreak fan

    Fan - High Temp Heat Sink - V1 | FUNMAT HT

    INTAMSYS

    Price: $14.95
    High Temp Heat Break Fan This is the OEM heatsink fan for the INTAMSYS FUNMAT HT V1. Also works for many other applications that require a 30x30x10 5v fan. 30x30x10mm DC 5 volt 1.3 Watts 85mm leads This fan will work on both the FUNMAT HT...
    SKU:
    INT-HTSNKFAN-V1
    Fits:
    INTAMSYS FUNMAT HT V1
    Price: $14.95
  • FUNMAT HT High Temp Fan V2

    Fan - High Temp Heat Sink - V2 | FUNMAT HT

    INTAMSYS

    Price: $15.00
    High Temp Heat Sink Fan for your INTAMSYS FUNMAT HT 3D Printer Replacement OEM fan for cooling the heat sink of the INTAMSYS FUNMAT HT High Temp 3D printer. Note: this heat sink fan is version 2 (blue plug) If your current fan has a black plug, it is...
    SKU:
    INT-HTSNKFAN-V2
    Fits:
    INTAMSYS FUNMT HT
    Price: $15.00
  • Intamsys 3D Printer high temp fan mount for heatsink

    Fan Mount Bracket for V6 Hotend - Aluminum

    INTAMSYS

    Price: $28.95
    Long lasting, durable fan mount for RepRap and E3D V6 style heat sink fan. This mount is machined out of aluminum to withstand heat and for longevity.  Fits:  E3D V6 RepRap V6 Style INTAMSYS FUNMAT HT  Please Note: This is...
    SKU:
    INT-FANBRACKET
    Fits:
    E3D V6
    Fits:
    RepRap
    Fits:
    INTAMSYS FUNMAT HT
    Price: $28.95
  • Bondtech Heatsink for Nema 17 Stepper Motor

    Heatsink for Nema17 Stepper Motor - Black

    PB3D

    Price: $2.49
    Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component. Equipped with self-adhesive on the back for easy attachment. Fits: Nema17 stepper motors Dimensions: 40 x 40 x 10 mm
    SKU:
    PBX-HEATSINK-BLK
    Price: $2.49
  • Bondtech Heatsink for Nema 17 Stepper Motor

    Heatsink for Nema17 Stepper Motor | Bondtech

    Bondtech

    Price: $2.99
    Bondtech Heatsink for Nema17 Stepper Motor Bondtech OEM Heatsink in black anodized aluminum to remove heat from desired component.  Equipped with self-adhesive on the back for easy attachment. Fits: Nema17 stepper...
    SKU:
    BOND-HEAT-13100
    Price: $2.99
  • small heatsink for stepper drivers

    Heatsink for Stepper Drivers - 5 Pack

    PB3D

    Price: $2.49
    Heatsink for Stepper Drivers Heatsink in silver aluminum to remove heat from desired component. Equipped with self-adhesive on the back for easy attachment.   Dimensions: 8.8 x 8.8 x 5 mm (+/- .15mm)
    SKU:
    PBX-HSINK-090905-5PK
    Price: $2.49