Print Beds & Surfaces

Print Beds & Surfaces

 

  • MakerGear OEM 8x10 Glass Build Surface

    8x10 Glass Build Surface | MakerGear

    MakerGear OEM

    $26.00
    8x10 Build Surface from MakerGear Made from borosilicate glass, this 8" x 10" x 0.13" (20 cm x 25 cm x 3.3 mm) build plate provides a perfect print surface when properly coated in a film of polyimide tape, GeckoTek or BuildTak. For use with the...
    $26.00
  • BuildTak FlexPlate 235x235

    BuildTak FlexPlate Only (10x10") 254x254mm

    BuildTak

    $25.95
    Extra FlexPlate Please Note: This is not the Complete Builtak Flexplate System. This is the FlexPlate only and requires a magnetic mounting base and print surface. Specially-coated FlexPlates are resistant to rust and work on both...
    $25.95
  • BuildTak FlexPlate 235x235

    BuildTak FlexPlate Only (6.25x9.25in) 159x235mm

    BuildTak

    $16.75
    Extra FlexPlate Please Note: This is not the Complete Builtak Flexplate System. This is the FlexPlate only and requires a magnetic mounting base and print surface. Specially-coated FlexPlates are resistant to rust and work on both heated...
    $16.75
  • BuildTak FlexPlate 165x165

    BuildTak FlexPlate Only (6.5x6.5") 165x165mm

    BuildTak

    $13.95
    Extra FlexPlate Please Note: This is not the Complete Builtak Flex System. This is the FlexPlate only and requires a magnetic mounting base and print surface. Specially-coated FlexPlates are resistant to rust and work on both heated...
    $13.95
  • BuildTak FlexPlate 8x10

    BuildTak FlexPlate Only (8x10") 203x254mm

    BuildTak

    $22.75
    Replacement FlexPlate Size: 203x254mm (8x10 inches) Includes: Spring steel sheet only (1 pcs) Please Note: This is not the Complete Builtak Flex System. This is a replacement FlexPlate and requires a magnetic mounting base and Builtak print surface...
    $22.75
  • BuildTak FlexPlate 235x235

    BuildTak FlexPlate Only (9.25x9.25in) 235x235mm

    BuildTak

    $23.95
    Extra FlexPlate Please Note: This is not the Complete Builtak Flex System. This is the FlexPlate only and requires a magnetic mounting base and print surface. Specially-coated FlexPlates are resistant to rust and work on both heated...
    $23.95
  • BuildTak FlexPlate

    BuildTak FlexPlate Only - Robo R2

    BuildTak

    $22.95
    Replacement BuildTak FlexPlate for Robo R2 Flexplate System Includes: FlexPlate (1 pcs) Please Note: This is not the Complete Builtak FlexPlate System. This is an individual replacement FlexPlate and requires a magnetic mounting base and BuildTak print...
    $22.95
  • BuildTak FlexPlate System for Ender 3

    BuildTak FlexPlate System (10x10") 254x254mm

    BuildTak

    $70.95
    BuildTak FlexPlate System (for select Flashforge 3D Printers) The original magnetic build surface and still one of the best available.  Benefits: Easy print removal Better adhesion of prints with the BuildTak print surface Swap...
    $70.95
  • BuildTak FlexPlate System for Flashforge

    BuildTak FlexPlate System (6.25x9.25") 159x235mm

    BuildTak

    $54.95
    BuildTak FlexPlate System (for select Flashforge 3D Printers) The original magnetic build surface and still one of the best available.  Benefits:Easy print removalBetter adhesion of prints with the BuildTak print surfaceSwap flexplates...
    $54.95
  • BuildTak FlexPlate System for Ender 2

    BuildTak FlexPlate System (6.5x6.5") 165x165mm

    BuildTak

    $42.95
    BuildTak FlexPlate System Size: 165x165mm (6.5x6.5in) Includes:  Original BuildTak print surface (1 pcs) Spring steel sheet (1 pcs) Magnetic base (1 pcs) Fits:  Ender 2 printers with a 165x165 print bed
    $42.95
  • BuildTak FlexPlate System for MakerGear

    BuildTak FlexPlate System (8x10") 203x254mm

    BuildTak

    $66.50
    BuildTak FlexPlate System Size: 203x254mm (8x10in) Includes:  Original BuildTak print surface (1 pcs) Spring steel sheet (1 pcs) Magnetic base (1 pcs) Fits: MakerGear M2 MakerGear M3 Other printers with a 203x254 print bed
    $66.50
  • BuildTak FlexPlate System for Ender 3

    BuildTak FlexPlate System - (9.25x9.25") 235x235mm

    BuildTak

    $66.95
    BuildTak FlexPlate System Size: 235x235mm (9.25x9.25in) Includes:  Original BuildTak print surface (1 pcs) Spring steel sheet (1 pcs) Magnetic base (1 pcs) Fits:  Ender 3 printers with a 235x235 print bed
    $66.95