Description
PB Select™ Magnetic 12 Volt Heated Bed Assembly
Notes:
1. Only compatible with the MK2.5 & 2.5S, NOT compatible with the MK2/2S, MK3/3S/3S+
2. This is a Prusa compatible bed. The Original Prusa bed is no longer available.
3. Flexible spring steel sheet is NOT included
Includes:
Magnetic heatbed MK52 12 volt (1 pcs)
Heatbed-Einsy power cable (screw-attached) (1 pcs)
Heatbed thermistor (already mounted and fixed in place by the aluminum and kapton tapes) (1 pcs)
Textile sleeve (Length: 300 mm, Width: 5 mm) (1 pcs)
Heatbed cable cover (1 pcs)
Heatbed cable cover clip (1 pcs)
Nuts: M3 nylon lock (2 pcs)
Nuts: M3 (3 pcs)
Socket head screws: M3x9 (5 pcs)
Flat head screws: M3x6 (6 pcs)
Washers: M3 flat (2 pcs)
Specifications:
Height: 264 mm
Width: 254 mm
Thickness: ~3 mm
Maximum working temperature: 120°C
Maximum recommended temperature: 110°C
Voltage: 12 volts
Current: 13A
Magnets: N35UH Neodym block magnet (28 pcs), attached. - these magnets are not quite as strong as the Original Prusa magnets, but still do a sufficient job of holding the print surface in place.
Fits:
MK2.5
MK2.5S
To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model
Additional Information
PSC: |
Print Surface & Build Plate Parts |
Brand Name: |
PB Select |
Voltage: |
12 Volts |
PSU: |
PB Select |
