Micro Swiss & Compatible

FlowTech™ Hotend for Bambu Lab P1 This hotend kit comes with a 0.40mm nozzle, plug-and-play heater core/thermistor and is fully compatible with the Bambu Lab P1P/P1S 3D Printers. Stock z-height, build volume and firmware remains unchanged...

FlowTech™ Hotend for Bambu Lab X1 This hotend kit comes with a 0.40mm nozzle, plug-and-play heater core/thermistor and is fully compatible with the Bambu Lab X1/X1C 3D Printers. Stock z-height, build volume and firmware remains unchanged...

Microswiss FlowTech™ Hotend for Creality CR-10 SE The FlowTech™ Hotend is a new generation hotend line from Microswiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps...

Microswiss FlowTech™ Hotend for Creality Ender 3 V3 KE The FlowTech™ Hotend is a new generation hotend line from Microswiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle...

Microswiss FlowTech™ Hotend for Creality Ender 3 V3 SE Upgrade your Ender 3 V3 SE printer with the FlowTech hotend kit and enjoy the convenience of cold nozzle changes, leak-proof nozzles, and a significant increase in flow rate.This kit...

Microswiss FlowTech™ Hotend for Creality Ender 3 V3 This kit comes with a plug and play Heater Core and thermistor, fully compatible with Ender 3 V3 printer. Stock z-height, build volume and firmware remains unchanged. Upgrading your...

Microswiss FlowTech™ Hotend for Sovol SV08 This kit comes with a plug-and-play heater core and thermistor, fully compatible with the Sovol SV08 printer. Stock z-height, build volume and firmware remains unchanged. By upgrading your Sovol...

FlowTech™ Silicone Socks A pack of 3 high temperature non-stick silicone socks for FlowTech™ hotend.Socks are made of a heat-resistant, non-stick silicone material, it will keep your heater block clean and will help retain the heat...

FlowTech™ Hardware Kit for M3102 , M3103, M3105, M3107 and M3108  Includes:Titanium Mounting Screws (2 pcs)Copper Thermal Adapter (1 pcs) Fits: Micro Swiss FlowTech™ Hotend for Creality CR-10 SE (M3102)Micro Swiss...

Hardware Kit for Direct Drive Extruder Spare hardware kit for Microswiss Direct Drive kit for CR-10 / Ender printers.  Includes:Beveled PTFE liner (1 pcs)M3 x .5 x 6mm Screws (3 pcs)M5 x .8 x 20mm Nylon Patch Screw (2 pcs)M5 x .8 x...

Heat Break (Thermal Tube) for Microswiss All Metal Hotend Kit This is a replacement heat break for this Microswiss all metal hotend upgrade. Includes: Heat break (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2

Heat Break (Thermal Tube) for Microswiss MK10 All Metal Hotend Kits This is a replacement heat break for the Microswiss MK10 All Metal Hotend Kit. Includes: Heat break (1 pcs) Thread: M7 Fits:Microswiss MK10 / MK11 HotendsFlashForge Creator...

Microswiss E3D Compatible Nozzle, Plated A2 Tool Steel, M6 Threads  Note: This nozzle is not compatible with the E3D Silicone Pro Sock. Use the standard silicone sock for this nozzle. This RepRap style nozzle is made...

Main Body for Microswiss Direct Drive Extruder configured for ExoSlide System Fits: Printers with ExoSlide System Includes: 1x Main Extruder body2x M4 x .7 x 16mm ExoSlide mounting screws CNC Machined and Assembled in USA

Original CR-10s Pro/Max Nozzle with M6x.75mm Threads   The Microswiss plated wear resistant nozzle starts as a precision machined brass nozzle and then has the Microswiss TwinClad XT coating applied. The result is a premium nozzle...

Microswiss Plated Wear Resistant Nozzle This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of...

MK10 All Metal Hotend Kit - Microswiss The Microswiss all metal hotend allows you to print at much higher temperatures than with PTFE-lined hotend.  All metal hotends offer more consistent melt chamber control. During slow extrusion rates...

MK10 Brass Nozzle (for Microswiss All Metal Hotend Only) Note: Will not fit the stock PTFE lined hotend. This nozzle has completely different internal dimensions to work with the Microswiss thermal barrier tube...

MK10 Brass Nozzle for PTFE Lined Hotend Includes: Nozzle (1 pcs) Size: Select Above Fits:Flashforge Guider 2 (not high temp version)Flashforge InventorFlashforge Inventor 2SFlashforge Creator ProFlashforge Creator MaxFlashforge...

Microswiss MK10 Wear-Resistant (A2 Tool Steel) Nozzle for Microswiss All Metal Hotend Kit  Perfect for printing abrasive material, such as carbon fiber, metal filled, wood-filled, glow in the dark, etc. *Note: This...