MK2.5S

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

PEI Print Surface - 260x242mm - for Prusa and other printers Includes: PEI sheet with 3M adhesive backing (1 pcs) Notes:1. This is NOT the Prusa spring steel sheet with smooth double-sided PEI (Link).2. Tiny dots may appear on the PEI...

PB Select™ Prusa Compatible V2 P.I.N.D.A Probe Includes: V2 PINDA (1 pcs) Fits:MK2.5MK2.5SMK3MK3S To test your current PINDA probe, follow this guide from the Prusa Knowledge Base.

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Specs:Wire:18 AGWLength: 72 inches (approximately) Max Operating Temp: 105°C (221°F)

PB Select™ Prusa PSU Holder Nut - 2 Pack Nickel plated M3nE nut. Used to secure the PSU to the t-slot rail. Includes: M3nE Nut (2 pcs) Fits:Prusa MK2.5Prusa MK2.5SPrusa MK3Prusa MK3SPrusa MK3S+Prusa MINIPrusa MINI+ To replace this part, please...

E3D 4mm Push Fit Collet (Collar) High quality replacement push fit collet with metal teeth. These are the small collets that fit E3D V6 and Prusa heatsinks. Includes: Collet (1 pcs)  Size:ID: 4mmOD: 5mm Fits: Bondtech ExtrudersE3D V6...

PB Select™ Hardware Kit Includes:M3x16 - fan to fan duct (4 pcs)M3x10 pan head - to clamp heater (2 pcs)M3x4 set screw for thermistor (2 pcs)M2 hex wrench (1 pcs)M1.5 hex wrench (1 pcs) For:E3D V6 Prusa MK2, MK3 SeriesRepRap

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

PB Select™ Smooth Linear Rod - X Axis Includes: Linear rod (1 pc) Specifications:Length: 370 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: X axis Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+Prusa MK3.9Prusa MK3...

PB Select™ Smooth Linear Rod - Y Axis Includes: Linear rod (1 pc) Specifications:Length: 330 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Y axis Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+Prusa MK3.9Prusa MK3...

PB Select™ Smooth Linear Rod - Z Axis Includes: Linear rod (1 pc) Specifications:Length: 320 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Z axis Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+

PB Select™ Smooth Linear Rod Bundle Includes: 370mm rod (2 pcs)330mm rod (2 pcs)320mm rod (2 pcs) Specifications:Diameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: 370mm = X axis 330mm = Y axis320mm = Z...

PB select™ Steel Ball & Magnets for Prusa Filament Runout Sensor and MMU3 Includes:19x6x2mm magnet (1 pcs)10x6x2mm magnet (2 pcs)7mm magnetic steel ball (1 pcs)

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...