MK2

PB Select™ 3mm Nylon Filament  This 3mm nylon filament is used in the wiring harness of Prusa i3 printers.The length is 50cm which is the proper length for the extruder wiring harness. It can be cut down to 30cm if you need it...

PB Select™ Heat Bed Power Cable This is the cable that runs from the Mainboard to the heated bed on Prusa MK2 series Note: ONLY compatible with the heated beds with detachable power cable. NOT compatible with heated beds where the power cable is...

PB Select™ PSU to RAMBo Mini Power Cable We use premium pure copper wire and premium connectors for a good quality long lasting cable. Includes: Power cable (1 pcs) Note: This is only one cable. The printer needs 2 cables to run from the...

PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...

PB Select CopperBlock™ Heater Block Nickel composite coated copper increases thermal conductivity.  Includes: Heater block (1 pcs)Set screw (1 pcs)Clamping screw (1 pcs) Specifications:Plating: Nickel CompositeMax Temperature:...

PB Select™ Endstop - Limit Switch This is a replacement endstop switch. Included: Limit switch (1 pcs) Fits:MK2MK2SMK2.5MK2.5S To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PB Select™ Idler Springs for Prusa Extruder Latch & MMU2S/3 Includes: Idler spring (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MiniMini+MMU2SMMU3 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PB Select™ Prusa Specific Titanium Heat Break High grade titanium helps eliminate heat-creep and is lighter than stainless steel. Similar to a standard E3D V6 heat break but with a special internal geometry for use with the...

PB Select™ All Metal Heat Break Includes: Heat break (1 pcs) For 1.75mm filament only Fits:E3D V6 hotendE3D Volcano hotendRepRap hotendPrusa MK2/3 (all variants without MMU)INTAMSYS FUNMAT HT

PB Select™ Titanium Alloy Heat Break for RepRap and E3D V7 Style Hotend Includes: Heat break (1 pcs) Low thermal conductivityHelps eliminate heat creepTitanium creates a sharper thermal cutoff for a more consistent extrusion Extremely smooth...

PB Select™ Heater Block Includes:Machined aluminum heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MK2Prusa MK2.5Prusa MK2.5SPrusa MK3Prusa Mk3SPrusa MK3S+E3D V6RepRap

PB Select™ Heater Cartridge for Prusa i3 MK2/2.5 Series Even heating throughout the cartridge for better heat distribution to the heater blockSilicone leads terminated with ferrules Includes: Heater cartridge (1 pcs) Specifications:Volts:...

PB Select™ Hobbed Gear Includes:Hobbed Gear (1 pcs)Grub screw (1 pcs) Location: Extruder Fits:MK2MK2SMMU2SMMU3 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PB Select™ Idler Pulley Includes: Idler pulley (1 pcs) Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+MINIMINI+ To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PB Select™ Kapton & Aluminum Tape Used to attach the thermistor to the heated bed on Prusa and other 3D printers. Includes:Kapton Tape - adhesive backed, approximately 4x4 inches (1 pcs)Aluminum Tape...

PB Select™ M3 Stainless Steel Square Nuts These thin square nuts work in many applications that require a thinner (1.75mm) square nut. Including E3D Hemera Stepper Motors, Prusa Printers and Bondtech Extruders. Includes: Square Nut (10...

PB Select™ Brass Nozzle This premium brass nozzle will provide a smooth consistent print. Includes: Nozzle of selected size (1 pcs) For: 1.75mm diameter filament Fits:Prusa MK2Prusa MK2SPrusa MK2.5Prusa MK2.5SPrusa MK3Prusa...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...