MK3.9/S

  Basics of 3D Printing with Josef Prusa   English Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d...

  Basics of 3D Printing with Josef Prusa   Spanish Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d.com...

Buddy3D Camera Buddy3D camera allows you to remotely monitor your prints via Prusa Connect and the Prusa mobile app, thanks to seamless integration enabled by custom-made firmware. Includes:Buddy3D Camera (1 pc)USB-A to USB-C Cable (1 pc)User Manual...

Digital Calipers Kinex 150mm (Kinex is now K-MET) Features:Measuring length: 150mm/ 6in0,01mm resolutionmm/in toggle buttonKeeps measured value after turning offDIN 862, ČSN EN ISO 13385-1 Includes: Digital calipers (1 pcs)Plastic case (1...

Torx Wrench Size: T6 Includes: Torx wrench (1 pcs) Fits: Set screws in Nextruder heater block

Needle File Set  Files with different profiles: flat, square, triangular, lenticular, semicircular, roundmade of GCr15 bearing steel Includes: Files (6 pcs)

Nozzle Cleaning Needle 0.3mm Diameter Includes: needle (5 pcs)  

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

9mm SAC-1 Stainless-Steel Graphics Knife with 30-Degree Precision Blade High-quality precisely made stainless steel precision knife with an acute 30° snap angle for enhanced cutting control. Each blade offers seven cutting segments per blade...

Replacement Blades for the Olfa SAC-1 Precision Knife  High-quality precisely made stainless steel 9 mm blades with an acute 30° snap angle for enhanced cutting control. Each blade offers seven cutting segments per blade...

  Prusa Brass Nozzle Brush Prusa Brass Nozzle Brush is optimized for 3D printing with its short and dense bristles. Includes: Brush (1 pcs) Made in EU with locally sourced beech wood.

PB Select™ Nextruder Hotend Screw Kit Includes:Set Screw (5 pcs)Pan Head Screw (2 pcs)T6 Torx WrenchT8 Torx Wrench Specs:Set Screw: M3x4mm, T6 torx headFor fastening thermistors and heater cartridge Pan Head: M2.5x6mm, T8 torx headFor fastening...

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...

Spare Parts Bundle (MK3.9 or MK4) A convenient set of spare parts and extra fasteners for maintenance and easy repairs of the Original Prusa MK4 printer or MK3.9 upgrade. Includes:Full set of pre-lubricated bearings ( 6pcs LM8UU, 2pcs...

Super Lube® 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality grease...

Super Lube® 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease. Includes: 1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...