PB Select™

Socket Head Cap Screw - 2 pack We have found that it is easy to strip the heads of the extruder cover screws on the K1 series of printers. We offer these upgraded screws that are stronger. Used to...

M6 Brass Thread Insert - 4 Pack Size: M6 OD: 9mm Length: 6mm Recommended hole diameter: 8mm For easy installation use the heat-set insert soldering iron tip by Virtjoule

M3 Leaf Spring T-Slot Nut (3030) Plated roll-in t-slot nut with leaf spring. Includes: M3 T-Slot nut with leaf spring (5 pcs) Size:(Measured by hand - sizes are approximate)Length: 19...

PB Select™ Prusa PSU Holder Nut - 2 Pack  *Clearance Item - no returns Nickel plated M3nE nut. Used to secure the PSU to the t-slot rail. Includes: M3nE Nut (2 pcs) Fits:MK2.5MK2...

PTFE Tube 2.5MM ID Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2.5mm (±0.25mm) Outside Diameter:...

Premium Heater Cartridge Includes: Heater (1 pcs) Specifications: Volts: 24Watts: 60Amps: 2.50Size: 6x15mmLeads: Silicone - 1000mmMax Temperature: 320c  

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

PB Select™ Smooth Linear Rod Bundle Includes: 370mm rod (2 pcs)330mm rod (2 pcs)320mm rod (2 pcs) Specifications:Diameter: 8mmG6 high precisionGcr15 steelHRC62 chrome...

Cable for LDO Orbiter V2.0 Filament Sensor Length: 2 meters

PB Select™ Linear Rod - Z Axis Includes: Linear rod (1 pcs) Specifications:Length: 498mmDiameter: 10mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Z...

PB Select™ Smooth Linear Rod - Y Axis Includes: Linear rod (1 pcs) Specifications:Length: 442.5mmDiameter: 10mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Y...

PB Select™ Smooth Linear Rod - X Axis Includes: Linear rod (1 pcs) Specifications:Length: 435mmDiameter: 10mmG6 high precisionGcr15 steelHRC62 chrome plated Location: X...

PB Select™ Smooth Linear Rod - Z Axis Includes: Linear rod (1 pcs) Specifications:Length: 400 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Z...

PB Select™ Smooth Linear Rod - X Axis Includes: Linear rod (1 pcs) Specifications:Length: 355 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: X...

PB Select™ Smooth Linear Rod - Y Axis Includes: Linear rod (1 pcs) Specifications:Length: 342.5 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Y...

PB Select™ Heat Bed Power Cable This is the cable that runs from the mainboard to heated bed on the Prusa MINI and MINI+ Includes: Cable (1 pcs)Terminal block plug (1 pcs) Specs:Wire:...

PB Select™ Nextruder Heater Block - Plated Copper This Nextruder heater block is made of nickel-plated copper. It's fully compatible with the Original Prusa Nextruder hotend...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa...

PB Select™ M3x6r Screw Set - Prusa MK3.9/4 Round head stainless steel screws for the expansion joints Includes: Screw (10 pcs) Size: M3x6mm Fits: Prusa MK3.9Prusa MK3.9SPrusa...