PRUSA RESEARCH

Prusa IR Filament Sensor Cable Includes: IR filament sensor cable (1 pcs) Fits: MK2.5S To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Prusa IR Filament Sensor-Einsy Cable Runs from filament sensor to mainboard. Includes: Cable (1 pcs) Fits:MK3SMK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make...

Prusa IR Filament Sensor Includes: IR filament sensor (1 pcs)  Fits:MK2.5SMK3SMK3S+ Notes:This IR filament sensor is ONLY compatible with the MK2.5S, MK3S and MK3S+. It...

Prusa Noctua Hotend Fan (Version A) This is a replacement Noctua hotend (heatsink) fan. Note: This is ONLY a direct fit replacement for the MK3, MK3S and MK3S+. See "Fits" section below if you...

Prusa MMU2S PTFE Tube  This is the replacement MMU2S-to-Extruder PTFE tube. Includes: PTFE tube (1 pcs) Specifications:Length: 360mm (tolerance +/- 0.4 mm)Inner diameter: 2 mmOuter...

Prusa MINI PTFE Fitting PTFE Fitting for PTFE tube extruder and heatsink connections Includes: PTFE Fitting (1 pcs) Fits:MINIMINI+ To replace this part, please consult the Prusa Assembly...

Prusa Hotend PTFE Tube Includes: Hotend PTFE tube (1 pcs) Specifications:Length: 50 (tolerance +/- 0.2 mm)Inner diameter: 1.85 mmOuter diameter: 4 mm Fits:MK2MK2SMK2...

Prusa Hotend PTFE Tube This is the replacement hotend PTFE tube. Includes: Hotend PTFE tube (1 pcs) Note: This is only compatible with the MK2.5S, MK3S and MMU2S hotends. It is not...

Prusa PEI-Ultem sheet Notes: 1. This is NOT the Spring steel sheet with smooth double-sided PEI.2. Tiny dots may appear on the PEI-Ultem surface. These can slightly affect the...

Prusa Hotend PTFE Tube This is a replacement hotend PTFE tube. Includes: Hotend PTFE tube (1 pcs) Specifications:Length: 42.3 mm (tolerance +/- 0.2 mm)Inner diameter: 1.85 mmOuter diameter: 4...

Prusa MINI Hotend Heater Cartridge This is a replacement hotend heater cartridge (E3D 24V 40W). Includes: Heater cartridge - E3D 24V 40W (1 pcs) Specifications:Voltage: 24VWattage:...

Prusa MINI+ Hotend Thermistor  *NOTE:  The MK2/2.5, MK3/S/+ and MINI/+ all use the same type of E3D thermistor.The MINI/+ thermistor has a longer wire (840mm on the MINI vs 750mm on...

Prusa MINI Heatsink This is a replacement heatsink for the MINI and MINI+. It is ONLY compatible with the Original Prusa MINI and MINI+. Includes:Hotend heatsink MINI (1 pcs)Threaded PTFE...

Prusa MINI Hotend Assembly Replacement hotend for the Original Prusa MINI, MINI+. All listed components are already assembled together. Includes:Nozzle (Diameter: 0.4 mm) (1 pcs)Hotend...

Prusa MINI Hotend Heatbreak This is an OEM Prusa MINI/+ hotend heat break. Includes:Hotend heat break MINI/+ (1 pcs)Thermal paste (0.5g) (1 pcs) Fits:MINIMINI+ Note: it is ONLY...

Prusa Prusa MINI Heater Block This is an OEM Prusa MINI heater block. Includes:Heater block (1 pcs)Screws: M3x4 (1 pcs), M3x10r (1 pcs)Thermal paste (0.5g) (1 pcs) - Important! The...

Prusa MINI PTFE Tube - Extruder to Print head  Runs from the extruder to the print head. Includes:Extruder-Print head PTFE tube (1 pcs) Swivel nut (2 pcs)Pressed olive part (2 pcs)...

SuperPINDA The SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI). SuperPINDA is temperature-independent, with higher quality sensor, and doesn't need a thermistor...

Prusa MINI Extruder Driven Gear (Filament Spur) Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI and Mini+. This is the driven/idler gear pushing the filament inside...

Extruder Drive Gear (Motor Pinion) for Prusa MINI OEM Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI and MINI+ extruder motor. This drive gear sits directly on the...