Robo R1

Robo R1+ Heated Glass Build Plate - New Style Important: Please read all the notes below before purchasing. If your current bed does not have the plug shown in the picture of the bed, you will also need to purchase the R1+ bed connection cable...

Robo R1/R1+ Heater Cartridge Robo 3D replacement heater cartridge (also called a heater core) Includes: Heater cartridge (1 pcs) Fits: Robo R1Robo R1+

Robo R1/R1+ Heater Cartridge Extension Cable Extension cable for R1/R1+ heater cartridge  This cable has a plug on one end to plug into the R1/R1+ heater cartridge wire and bare wires (no plug) at the other end, so it will attach to your current...

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

Heatsink for Stepper Drivers Aluminum heatsink to remove heat from desired component.Self-adhesive on the back for easy attachment. Includes: Heatsink (5 pcs) Dimensions: 8.8 x 8.8 x 5 mm (+/- .15mm)

L-Shape Hex Wrench Size: 1.5mmLength: 78.5mmBrand: BONDHUS Made in the USA

  Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mm 

PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm

Robo Hobbed Bolt v2 This hobbed bolt has a wider filament path than the v1 (the v1 is no longer available). Includes: Hobbed bolt (1 pcs) Fits:Robo R1Robo R1+

Hotend Cable Guide for R1 Guides the hotend heater and thermistor cable When installing, rotate your hotend 90 degrees so the wires face the front of the printer. Designed by: Bob R.  

Robo R1+ Hotend Quick Release Plate This plate locks the hotend in place. Hardware not included.  Includes: Hotend plate (1 pcs) Fits: Robo R1Robo R1+ 

Robo R1+ Leadscrew Nut Includes: Leadscrew Nut (2 pcs) Fits: Robo R1+Robo R1 with upgraded Z axis

Robo R1+ Limit Switch - Z Axis  Includes: Limit switch (1 pcs) Fits: R1+ 

Limit Switch (endstop) Includes: Limit switch (1 pcs) Location: X/Y Axis Fits:Robo R1Robo R1+ 

MYT™ LM8UU Precision Linear Bearings Includes: Linear bearing (4 pcs) Specifications:ID: 8mmOD: 15mmL: 24mm Fits:Flashforge Creator Pro (Y Axis)Prusa MK2/SPrusa MK2.5/SPrusa MK3/S/+Prusa MINI/+Robo R1/+Anet A8Anet A8 PlusOther printers...

Robo R1 Linear Rod - 8mm - X Axis  G6 high precision, HRC62 Hard Chrome Plated, Gcr15 steel, smooth linear rods.  Includes: Linear rod (1 pcs) Location: X axis Fits:Robo R1Robo R1+

Robo R1 Linear Rod - 8mm - Y Axis  G6 high precision, HRC62 Hard Chrome Plated, Gcr15 steel, smooth linear rods.  Includes: Linear rod (1 pcs) Location: Y axis Fits:Robo R1Robo R1+

Robo R1 Linear Rod - 8mm - Z Axis  G6 high precision, HRC62 Hard Chrome Plated, Gcr15 steel, smooth linear rods.  Includes: Linear rod (1 pcs) Location: Z axis Fits:Robo R1Robo R1+

Robo 3D Brass Nozzle Size:  0.40mm  Fits: Robo R1Robo R1+Robo R2Robo C2

Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...