SV07 Plus

PB Select™ Hotend Air Duct MJF printed in Nylon to handle higher temperatures than the stock air duct.  Includes: Air duct (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Hotend Air Duct for SV06 Plus Directs airflow to the part being printed Includes: Air duct (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Blower Fan This fan is used as the print cooling fan or the hotend heatsink cooling fan.  Includes: Fan (1 pcs) Specifications:Size: 40x40x10mmVoltage: 24vdc Fits: SV06 SV06 PlusSV07SV07 Plus Notes: Only one fan is...

LED Cable Connects from extruder board to extruder LED board Includes: Cable (1 pcs) Fits: SV07SV07 Plus

Drive Pulley for X or Y Axis Includes: Pulley (1 pcs)Set screw (2 pcs) Location: X or Y Motor Fits: SV06SV06 PlusSV07SV07 Plus

Extruder Adapter Board Includes: Extruder adapter board (1 pcs) Fits:SV07SV07 Plus

Extruder Assembly for Sovol SV07 and SV07 Plus Includes: Extruder assembly (1 pcs) Fits: SV07SV07 Plus

Extruder Drive Gear This drive gear works as either the drive or driven gear. If you are replacing both drive gears, order two.  Includes: Drive gear (1 pcs) Fits: SV06SV06 PlusSV07SV07 Plus Note: Requires two M3x3 set...

Planetary Gear Set Includes: Planetary gear (3 pcs) Fits: SV06SV06 PlusSV07SV07 Plus Notes:Bearings not included. It is recommended to grease the gears. You can find grease here.  

Extruder Stepper Motor Includes: Stepper motor with gear (1 pcs) Fits: SV06SV06 PlusSV07SV07 Plus

6020 Axial Fan This is the large fan located on the X carriage behind the print head. It cools the print during high speed printing.  Includes: Fan (1 pcs) Specifications:Size: 60x60x20mmVoltage: 24vdc Fits: SV07SV07 Plus

Filament Runout Sensor Includes: Sensor Switch (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Build Plate (Print Surface) with Magnet Textured PEI powder coated on one side Includes: Build plate (1 pcs)Magnetic base with adhesive backing (1 pcs) Size: 310x320mm  Fits: SV07 Plus

Hardened Steel High Flow Nozzle Made of hardened steel for printing abrasive filaments.  Includes: Nozzle (1 pcs) Size: Select Above For: 1.75mm diameter filament Fits: SV06 PlusSV07SV07 Plus

Build Plate Heater for SV07 Plus Includes: Aluminum bed heater (1 pcs)Magnetic sheet - installed on bed heater (1 pcs) Fits: SV07 Plus Note: Does not include build plate/print surface or mounting hardware.

Heater Block (Hot Block) Includes: Heater block (1 pcs) Fits: SV06 PlusSV07SV07 Plus Note: Does not include any installation hardware.

Hotend Heater Cartridge Heats the hotend Includes: Heater (1 pcs) Fits:SV06SV06 PlusSV07SV07 Plus

Hotend Assembly for SV06 Plus, SV07/Plus Includes: Heat break (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermistor (1 pcs)Silicon sock (1 pcs)M2.5x10 socket head cap screws (2 pcs)0.40mm nozzle (1 pcs) Fits: SV06 PlusSV07SV07 Plus

LED Light (PCB Board) for Extruder Aluminates the part being printed.  Includes: Led light board(1 pcs) Fits: SV07SV07 Plus

Mainboard (Motherboard) for Sovol SV07 Plus This silent mainboard comes with firmware loaded. Includes: Mainboard (1 pcs) Fits: SV07 Plus