Universal Fit

Heater Cartridge This premium heater cartridge has a middle connector for easy replacement and provides consistent even heating throughout the cartridge for better heat distribution to the heat block. Includes: Heater (1 pcs)Extension cable (1...

Heater Cartridge - 24v 40w This premium heater cartridge provides consistent heating through the cartridge for better heat distribution to the heater block. Includes: Heater (1 pcs) Use BN Paste for even more efficiency and to extend service life...

*Clearance item - no returns Aluminum Heatsink Size: 9x9x12 Color: Black Adhesive back: Yes 5 Pack

*Clearance item - no returns Heatsink for Stepper Drivers Aluminum heatsink to remove heat from desired component.Self-adhesive on the back for easy attachment. Includes: Heatsink (5 pcs) Dimensions: 8.8 x 8.8 x 5 mm (+/- .15mm)

Heavy Duty Metal Push Fit Connector  All Metal For 4mm Tube Thread G1/8″  Note: If you are having trouble with the Bowden tube popping out, click here and go to the Bowden tube section

PB Select™ High Flow Brass Nozzle (Volcano Compatible) Includes: Nozzle (1 pcs)Orifice Size: Select AboveMaterial: BrassFor Filament Size: 1.75mm Size is easily identified by dots on the side of the nozzleDOTS = DIAMETER0...

PB Select™ Plated Copper High Flow Nozzle Includes: Nozzle (1 pcs) Size: Select Above These high precision copper nozzles are great for printing everything from PLA to PEEK. they have a much higher thermal...

Artillery Idler Pulley  Includes: Pulley (1 pcs) Specs:20 Tooth7mm Wide (for 6mm belt)5mm Bore15mm OD Fits:Sidewinder X1Sidewinder X2GeniusGenius Pro

2.54 Jumper Includes: Jumper (24 pcs)

*Clearance item - no returns  Blemished  These rolls of tape are wound slightly off-center, however the tape is good and fully usable.  Heat Resistant Kapton Tape Use this tape to secure the insulation to your Flashforge heater...

PB Select™ Smooth Linear Rod - X Axis Includes: Linear rod (1 pcs) Specifications:Length: 435mmDiameter: 10mmG6 high precisionGcr15 steelHRC62 chrome plated Location: X axis Fits:Sovol SV06 Plus

PB Select™ Smooth Linear Rod - Y Axis Includes: Linear rod (1 pcs) Specifications:Length: 442.5mmDiameter: 10mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Y axis Fits:Sovol SV06 Plus

PB Select™ Linear Rod - Z Axis Includes: Linear rod (1 pcs) Specifications:Length: 498mmDiameter: 10mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Z axis Fits:Sovol SV06 Plus

PB Select™ Smooth Linear Rod - Y Axis Includes: Linear rod (1 pcs) Specifications:Length: 342.5 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Y axis Fits:Sovol SV06

PB Select™ Smooth Linear Rod - X Axis Includes: Linear rod (1 pcs) Specifications:Length: 355 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: X axis Fits:Sovol SV06

Linear Rod Length: 365mm Diameter: 8mm G6 high precision HRC60 Hard Chrome Plated Gcr15 steel

PB Select™ Smooth Linear Rod - Z Axis Includes: Linear rod (1 pcs) Specifications:Length: 400 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Z axis Fits:Sovol SV06

PB Select™ Brass Nozzle This premium brass nozzle will provide a smooth consistent print. Includes: Nozzle of selected size (1 pcs) For: 1.75mm diameter filament Fits:Prusa MK2Prusa MK2SPrusa MK2.5Prusa MK2.5SPrusa MK3Prusa...

MK10 Brass Nozzle (for Microswiss All Metal Hotend Only) Note: Will not fit the stock PTFE lined hotend. This nozzle has completely different internal dimensions to work with the Microswiss thermal barrier tube...

MK10 Brass Nozzle for PTFE Lined Hotend Includes: Nozzle (1 pcs) Size: Select Above Fits:Flashforge Guider 2 (not high temp version)Flashforge InventorFlashforge Inventor 2SFlashforge Creator ProFlashforge Creator MaxFlashforge...