Extruders

Bondtech BMG Extruder - Left Hand This version is the lefthand version that is a mirror version of the BMG extruder For 1.75 mm size filament only This extruder is sold without motor Please note the orientation of the motor gear in the photo The...

Bondtech BMG Extruder - Right Hand For 1.75 mm diameter filament only This extruder is sold without motor Please note the orientation of the motor gear in the photo The extruder can use any Nema17 motor with a standard 5 mm shaft E-step value:...

Bondtech BMG-M Extruder for Slice Engineering Mosquito Hotends For 1.75mm filament Optimized for the Slice Engineering Mosquito and Mosquito Magnum hotends High performance and resolution with low weight Bondtech's precise Dual-Drive...

Bondtech BMG-M Mirrored Extruder for Slice Engineering Mosquito Hotends Left hand version (Mirrored) For 1.75mm filament Optimized for the Slice Engineering Mosquito and Mosquito Magnum hotends High performance and resolution with low...

Bondtech BMG-X2 Extruder C-C of 18.00 Please Note: Extruder mounts not included. If you need the aluminum mounts, click here.  Additional Info:A short piece (38mm long) of 4mm PTFE tube is used to guide the filament into the hotend...

Bondtech BMG-X2 Extruder - C-C distance of 20.00 Please Note: Extruder mounts not included. If you need the aluminum mounts, click here.  Additional Info: A short piece (38mm long) of 4mm PTFE tube is used to guide the filament...

Bondtech Extruder Upgrade Kit for Creality CR-10 (mount included) This extruder upgrade kit for the Creality CR10, Ender, Tevo Tornado and other printers that uses the same type of mounting plate will replace the original feeder. This kit contains...

Bondtech BMG Extruder Upgrade Kit for Creality CR-10S with Mount The Bondtech extruder allows for a more reliable printing with all sorts of filaments and the Dual Drive system ensures that the extruder never looses grip of the filament.  This...

DDX Adapter for Mosquito   To use with Bondtech DDX Direct Drive eXtruder for Creality   This set is necessary to install Slice Engineering's Mosquito hotend in a DDX Upgrade kit.     Important Notes from Bondtech:...

DDX Adapter Set For Creality Ender-3 / CR-10 Note: Does not fit DDX V3 This set is necessary to install a DDX Upgrade Kit on the models listed below. Fits: Ender-3 CR-10 CR-10S CR-10 S4 CR-10 S5 Requires your printer to have a 40x40x10mm...

Genuine Bondtech Drive Gear Kit 1.75mm/5.0mm Come as a set consisting of a primary drive gear, a secondary gear, bearings and a shaft. This kit is for 1.75 mm diameter filament and contains:  primary gear with inner diameter of 5mm secondary...

Genuine Bondtech Drive Gear Kit - 1.75/8.0mm Drive gear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft. This 1.75/8.0mm gear kit is for 1.75 mm diameter filament and contains:  Primary gear...

Genuine Bondtech Drive Gear Kit - 3.0/8.0mm Drive gear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft. This gear set is for 2.85/3mm diameter filament and contains a primary gear with inner...

Extension Cable for Bondtech DDS on Creality CR10S  Extension cable to use the Bondtech Creality CR10S Direct Drive Extruder on the S4 and S5 models.  This will extend the existing cables 40 cm...

This Rebuild Set contains only the necessary parts to update the previous Bondtech Upgrade Kit for Prusa i3 MK2.5/3 to the MK3S design. This upgrade is necessary because the Prusa i3 MK3S feature a new integrated IR filament sensor that doesn’t...

Bondtech Extruder Upgrade Kit for FlashForge Creator Pro 2016 Dual Nozzle This extruder upgrade kit for the Flashforge Creator Pro 2016 Dual Nozzle printer replaces your original feeders and coldblock. It allows for a more reliable printing...

Bondtech LGX Extruder - Large Gears eXtruder  Note: This extruder only supports 1.75 mm size filament. Features of the Bondtech LGX eXtruder: Larger drive wheels, for increased filament grip; Filament pre-tension lever, for repeated...

Bondtech LGX™ for Flexibles Set Note: This add-on only supports 1.75 mm size filament. Designed with flexibles in mind The LGX™ for Flexibles Set is a special hotend to be used with the LGX™ eXtruder. With...

Bondtech Extruder Upgrade for Prusa i3 MK2 and MK2S This Bondtech extruder upgrade kit is for the Prusa MK2 or the Prusa MK2S if you don't have Bondtech gears. This Bondtech extruder kit contains the necessary parts to convert to the freshly designed...

Bondtech IFS Extruder for Prusa Mini  Bondtech Internal Filament Sensor Extruder for Prusa Mini This extruder is an evolution of Bondtech's previous high-resolution extruder upgrade for the Prusa Mini. Allows you to...

Bondtech QR Extruder Upgrade Kit for the Ultimaker 2 Fits: Ultimaker 2 Go, Ultimaker 2, Ultimaker 2 Extended, Ultimaker 2+, Ultimaker 2 Extended+ This kit provides a high-performance material feeding system with the ability to print faster with...

Bondtech QR Universal Extruder - Lefthand, 1.75mm Mount not included. Download the .stl file here to print yours!  Lefthand/Mirrored Includes cable with quick-connectors (700mm, equipped with a 2510 connector) Housing professionally printed...

Bondtech QR Universal Extruder for 1.75mm diameter filament Mount not included. Download the .stl file here to print yours!  Righthand Includes cable with quick-connectors (700mm, equipped with a 2510 connector) Housing professionally printed...

Bondtech QR Universal Standard Extruder for 2.85/3.00mm diameter filament Mount not included. Download the .stl file here to print yours!  Righthand Includes cable with quick-connectors (700mm, equipped with a 2510 connector) Housing...

Raise3D N2 Dual Direct Upgrade Kit by Bondtech This new compact, lightweight extruder upgrade for Raise3D printers will solve your feeding problems, improve surface quality and make it possible to print at faster speeds with sustained quality. Please...

Bondtech Upgrade Kit for Wanhao D6  This extruder upgrade kit for the Wanhao Duplicator 6/Monoprice Duplicator 6 will replace the original feeder. The original motor is used and the PTFE feedtube is held securely in place with an industrial 4 mm...

Bondtech Upgrade Kit for Wanhao D9 Total weight: 220g (Factory extruder 325g)E-step value: 415 (Factory value 96) Housing Parts: professionally SLS printed in nylon for maximum strength and precision Compatible with: Factory...

Bondtech Extruder Upgrade Kit for Wanhao i3 Motor not included, use the original stepper motor that came with your printer  For simple installation, Bondtech is now producing a custom mounting bracket  This kit provides a...

SLS X-Carriage kit for Prusa i3 MK3S Please note: this X-Carriage kit is required to install the Bondtech Upgrade Kit for Prusa i3 MK3S. This is very similar to the original X-Carriage Kit. The main difference is the 3D printed technology used...