MINI/+

Prusa MINI Bearing Clips Includes: Bearing Clip (3 pcs)Screws (6 pcs)Nyloc Nuts (6 pcs) Note: Bearings not included. Fits:MINIMINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

PB Select™ Kapton & Aluminum Tape Used to attach the thermistor to the heated bed on Prusa and other 3D printers. Includes:Kapton Tape - adhesive backed, approximately 4x4 inches (1 pcs)Aluminum Tape...

Kapton and Aluminum Tape Used to attach the thermistor to the heated bed on Prusa 3D printers. Includes:Kapton Tape - adhesive backed, approximately 3X3 inches (1 pcs)Aluminum Tape...

Prusa MINI/+ Heated Bed Assembly (24v) Magnetic heated bed for the Original Prusa MINI/+. All listed components are already assembled together. Includes:Magnetic heatbed MINI/+ 24V (1 pcs)Heatbed thermistor (already mounted and fixed in place by the...

Prusa PEI-Ultem sheet Notes: 1. This is NOT the Spring steel sheet with smooth double-sided PEI.2. Tiny dots may appear on the PEI-Ultem surface. These can slightly affect the finished print bottom surface. However, they do not...

PEI Print Surface Includes: PEI sheet with 3M adhesive backing (1 pcs) Notes:1. This is NOT the Prusa spring steel sheet with smooth double-sided PEI (Link).2. Tiny dots may appear on the PEI surface. These can slightly affect the...

Prusa MINI/+ Double-Sided Satin PEI Powder-Coated Spring Steel Sheet Includes: Satin spring steel sheet (1 pcs) The satin spring steel sheet further expands the Prusa line-up of print sheets. In terms of printing properties, the satin sheet sits between...

Double-Sided Smooth PEI Spring Steel Sheet for Prusa MINI/+ This is the smooth double-sided PEI spring steel sheet Includes:Spring steel sheet (1 pcs)Smooth PEI-Ultem sheet (2 pcs) - already mounted and fixed in place on each side of the steel...

Double-sided textured PEI powder-coated spring steel sheet for the Prusa Mini Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives...

PB Select™ Spacers for Prusa Heated Bed - Pack of 2 Includes: Stainless steel bed spacer (2 pcs) Fits:MK2MK2SMiniMini+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

SuperPINDA The SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI). SuperPINDA is temperature-independent, with higher quality sensor, and doesn't need a thermistor. Making the first layer calibration and mesh bed leveling...

Heatbed Thermistor Set Includes:Thermistor - E3D (1 pcs)Kapton tape (1 pcs)Aluminum tape (1 pcs) Specifications:Connector: Molex 5057-9402Cable length: 630 mm Fits:MINIMINI+MK2MK2.5MK2.5SMK3MK3SMK3S+ Note: This is the latest version of the...

PB Select™ Thermistor for Prusa Heated Bed Includes: Bed thermistor (1 pcs) Cable length: 630 mm Fits:MINIMINI+MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+ Note: Does not include the kapton or aluminum tape that is needed for installation -...

PB Select™ U-Bolt Includes:U-bolt (3 pcs)Nylon lock nuts (6 pcs) Specifications:Thread: M3Length: 26 mmThread length: 7mmDistance between center of both tips: 20 mmInside bend diameter: 16.5mm Fits:MK2SMK2.5MK2.5SMK3MK3SMINI To replace this part,...

PB Select™ U-Bolt Includes:U-bolt (1 pcs)Nylock nuts (2 pcs) Specifications:Thread: M3Length: 26 mmThread length: 7mmDistance between center of both tips: 20 mmInside bend diameter: 16.5mm Fits:MK2SMK2.5MK2.5SMK3MK3SMINI To replace this part,...

Y Carriage  Fits: Prusa MINIPrusa MINI+ Note: No hardware included

PB Select™ Y Carriage  Fits: Prusa MINIPrusa MINI+ Note: No hardware included.