MINI/+

MINI/+

prusa-logo-100x.png

  • Robo R1+ Idler Bearing

    Bearing - 8x22mm

    Robo 3D

    $3.49
    Ball Bearing Size: S608Z (8X22X7) Fits: Robo R1+ Prusa MINI Prusa MINI+ Prusa MMU2S
    SKU:
    PBX-BEAR-608Z
    Fits:
    R1+
    Category:
    Bearings & Bushings
    $3.49
  • Bearing Brackets for Prusa MINI

    Bearing Clips - MINI, MINI+ | Prusa

    Prusa Research OEM

    $6.99
    Bearing Clips Includes:  Bearing Clip (3 pcs) Screws (6 pcs) Nyloc Nuts (6 pcs) Fits: MINI MINI+  Note: Bearings not included To replace this parts, please consult the Prusa Assembly Manuals. Make sure to follow...
    SKU:
    PRUSA-BEDCLIPS-0809
    Category:
    Bearings
    Category:
    Build Plate
    Category:
    Hardware
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $6.99
  • Y Axis Belt for Prusa Mini and Mini+

    Belt - X Axis - MINI, MINI+

    Gates

    $4.49
    X Axis Timing Belt Includes: Belt - X Axis (1 pcs) Fits: MINI MINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.
    SKU:
    PRUSA-BLT-X-0809
    Category:
    Belts
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $4.49
  • Y Axis Belt for Prusa Mini and Mini+

    Belt - Y Axis - MINI, MINI+

    Gates

    $4.99
    Y Axis Timing Belt Includes: Belt - Y Axis (1 pcs) Fits: MINI MINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.
    SKU:
    PRUSA-BLT-Y-0809
    Category:
    Belts
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $4.99
  • Motor Gear for Prusa Mini

    Extruder Drive Gear for MINI, MINI+ | Prusa

    Prusa Research OEM

    $4.99
    Extruder Drive Gear (Motor Pinion) for Prusa Mini This is the Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI and Mini+ extruder motor. This drive gear sits directly on the extruder motor shaft. Includes: Extruder Drive...
    SKU:
    PRUSA-GEAR-EXT-0809
    Category:
    Extruder & Hotend
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $4.99
  • Extruder Driven Gear for Prusa Mini

    Extruder Driven Gear (Filament Spur) MINI, MINI+ | Prusa

    Prusa Research OEM

    $4.99
    Extruder Driven Gear (Filament Spur) This is the Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI and Mini+. This is the driven/idler gear pushing the filament inside the extruder assembly. Includes: Extruder Driven...
    SKU:
    PRUSA-GEAR-SPUR-0809
    Category:
    Extruder & Hotend
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $4.99
  • Prusa Mini Extruder to Print Head PTFE Tube

    Extruder to Print head PTFE tube - MINI, MINI+ | Prusa

    Prusa Research OEM

    $3.49
    Extruder to Print head PTFE tube This product is the replacement Extruder to Print head PTFE tube for the Original Prusa MINI/+. Includes: Extruder-Print head PTFE tube (MINI/+) (1 pcs) Swivel nut (2 pcs) Pressed olive part (2...
    SKU:
    PRUSA-PTFE-E2P-0809
    Category:
    Extruder & Hotend
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $3.49
  • Prusa MK3 Fan with Plug

    Fan - Blower for Print Cooling - MK3, MK3S, MK3S+, MINI, MINI+ | Fysetc

    Fysetc

    $6.99
    Replacement Blower Fan Specs Hydraulic Sleeve Bearing Rated voltage: 5V DC Dimensions: 50x15 mm Cable length: 750mm (Approximate)   Fits: Prusa MK3 Prusa MK3S Prusa MK3S+ Prusa MINI Prusa MINI+
    SKU:
    FYS-FAN-5V5015
    Category:
    Fans
    Voltage:
    5 Volts
    Fits:
    Prusa MK3
    Fits:
    Prusa MK3S
    Fits:
    Prusa MK3S+
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $6.99
  • Prusa MINI Print Cooling Fan

    Fan - Blower for Print Cooling - MK3, MK3S, MK3S+, MINI, MINI+ | Prusa

    Prusa Research OEM

    $8.99
    Print (Part) Cooling Blower Fan This is the fan that cools the part being printed Includes: Print cooling fan (1 pcs) Fits: MK3 MK3S MK3S+ MINI MINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...
    SKU:
    PRUSA-FAN-PC-05-09
    Category:
    Fans
    Voltage:
    24 Volts
    Fits:
    Prusa MK3
    Fits:
    Prusa MK3S
    Fits:
    Prusa MK3S+
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $8.99
  • Prusa MINI Hotend Fan

    Fan for Hotend - MINI, MINI+ | Prusa

    Prusa Research OEM

    $10.95
    Hotend Fan This is a replacement hotend fan. Note: This fan is ONLY compatible with the Original Prusa MINI and MINI+. Includes: Hotend fan (1 pcs)  Fits: MINI MINI+ To replace this part, please consult the Prusa Assembly...
    SKU:
    PRUSA-FAN-HS-0809
    Category:
    Fans
    Voltage:
    24 Volts
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $10.95
  • Bondtech Heatbreak for Prusa Mini

    Heat Break Kit for Prusa MINI - Stainless Steel | Bondtech

    Bondtech

    $14.95
    Bondtech SS Heat-break Kit for Prusa Mini Solves the heat-creep Stainless Steel heat-break for the Prusa Mini. Solves the heat-creep issues revealed during the extensive testing Bondtech performed on the Prusa Mini. The adjusted length of the...
    SKU:
    BOND-HB-15067
    Category:
    Bondtech Parts
    $14.95
  • Prusa Mini Heatbreak

    Heatbreak for MINI, MINI+ | Prusa

    Prusa Research OEM

    $9.99
    Hotend Heatbreak This is a replacement Hotend heatbreak for MINI, Mini+. It is ONLY compatible with the Original Prusa MINI and Mini+. Includes: Hotend heatbreak MINI/+ (1 pcs) Thermal paste (0.5g) (1 pcs) Fits: Mini Mini+ To...
    SKU:
    PRUSA-HBRK-0809
    Category:
    Extruder & Hotend
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $9.99
  • Heater Block for Prusa Mini

    Heater Block for MINI, MINI+ | Prusa

    Prusa Research OEM

    $12.99
    Hotend Heater Block This is the replacement hotend heater block for Prusa MINI. It is ONLY compatible with the Original Prusa MINI and Mini+. Includes: Heater block (1 pcs) Screws: M3x4 (1 pcs), M3x10r (1 pcs) Thermal paste (0.5g) (1...
    SKU:
    PRUSA-HBLOK-0809
    Category:
    Extruder & Hotend
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $12.99
  • Prusa Mini Heatsink

    Heatsink for MINI, MINI+ | Prusa

    Prusa Research OEM

    $17.99
    Hotend Heatsink This is a replacement heatsink for the MINI and MINI+. It is ONLY compatible with the Original Prusa MINI and MINI+. Includes: Hotend heatsink MINI (1 pcs) Threaded PTFE connection (1 pcs) Screws: M3x4 (3 pcs) Thermal paste (0...
    SKU:
    PRUSA-HS-0809
    Category:
    Extruder & Hotend
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $17.99
  • Prusa idler pulley

    Idler Pulley - I3 Series and MINI, MINI+ | Prusa

    Prusa Research OEM

    $6.99
    Idler Pulley Includes:  Idler Pulley Fits: MK2 MK2S MK2.5 MK2.5S MK3 MK3S MK3S+ MINI MINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer...
    SKU:
    PRUSA-PLY-IDL-01-09
    Category:
    Pulleys
    Fits:
    Prusa MK2
    Fits:
    Prusa MK2S
    Fits:
    Prusa MK2.5
    Fits:
    Prusa MK2.5S
    Fits:
    Prusa MK3
    Fits:
    Prusa MK3S
    Fits:
    Prusa MK3S+
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $6.99
  • Idler Spring for Prusa Printers

    Idler spring | Prusa

    Prusa Research OEM

    $2.49
    Idler Spring Idler spring (1 pcs) Fits: MK2.5 MK2.5S MMU2S MK3 MK3S MK3S+ Mini Mini+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.
    SKU:
    PRUSA-SPRING-IDLER-03-10
    Category:
    Extruder & Hotend
    Fits:
    Prusa MK2.5
    Fits:
    Prusa MK2.5S
    Fits:
    Prusa MK3
    Fits:
    Prusa MK3S
    Fits:
    Prusa MK3S+
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    Fits:
    MMU2S
    $2.49
  • R1 Linear Bearing Set

    Linear Bearing - 4 Pack - LM8UU | THK

    THK

    $18.95
    Precision Linear Bearings Note: Measure the length of your current bearings to make sure these will fit.  Length: 24mm Size: LM8UU Includes: LM8UU Linear Bearing (4 pcs)
    SKU:
    R1-BEAR-LIN-4PK
    Category:
    Bearings & Bushings
    Fits:
    Robo R1+
    Fits:
    Prusa MK2
    $18.95
  • Prusa Lubricant

    Lubricant Applicator Set (5g) | Prusa

    Prusa Research OEM

    $5.99
    Prusa Lubricant Applicator Set Universal lubricant with applicator for printer maintenance. Your printer should be after a certain period of time (see the 3D Printing Handbook) cleaned and greased in order to work properly. More information...
    SKU:
    PRUSA-LUBE
    Category:
    Rods
    Category:
    Bearings
    Fits:
    Prusa MK2
    Fits:
    Prusa MK2S
    Fits:
    Prusa MK2.5
    Fits:
    Prusa MK2.5S
    Fits:
    Prusa MK3
    Fits:
    Prusa MK3S
    Fits:
    Prusa MK3S+
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $5.99
  • Prusa PEI Sheet

    PEI (ULTEM) Sheet | Prusa

    Prusa Research OEM

    $9.99
    PEI-Ultem sheet PEI-Ultem sheet (MK2/S, MK2.5/S, MK3/S/+, MINI/+) This product is the replacement PEI-Ultem sheet. This is NOT the Spring steel sheet with smooth double-sided PEI. Includes: PEI-Ultem sheet (1 pcs) 3M 200MP adhesive...
    SKU:
    PRUSA-PEI-01-07
    Category:
    Build Plate
    Fits:
    Prusa MK2
    Fits:
    Prusa MK2S
    Fits:
    Prusa MK2.5
    Fits:
    Prusa MK2.5S
    Fits:
    Prusa MK3
    Fits:
    Prusa MK3S
    Fits:
    Prusa MK3S+
    Fits:
    Prusa MINI
    Fits:
    PRUSA MINI+
    $9.99
  • Bondtech Extruder for Prusa Mini

    Prusa MINI Extruder (Non IFS) | Bondtech

    Bondtech

    $64.95
    Bondtech Extruder Upgrade Kit for Prusa Mini  Note: Not compatible with the Prusa internal filament sensor. Fits: Mini Mini+ Includes: 1x Bondtech extruder for Prusa Mini 3x Black nylon zip-ties 4x M3x35 black oxide steel screws 1x...
    SKU:
    BOND-PRUSA-M-K76
    Category:
    Bondtech Extruders
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $64.95
  • Bondtech Upgrade to IFS Extruder for Prusa Mini

    Prusa MINI Extruder - Upgrade to IFS kit | Bondtech

    Bondtech

    $34.95
    Bondtech IFS Extruder upgrade kit for Prusa Mini  Upgrade your Bondtech Prusa Mini extruder to support the Internal Filament Sensor feature Please note: This is a set of plastic parts for upgrade the previous “Upgrade Kit For Prusa...
    SKU:
    BOND-PRUSA-M-K83
    Category:
    Bondtech Parts
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $34.95
  • Bondtech IFS Extruder for Prusa Mini

    Prusa MINI IFS Extruder | Bondtech

    Bondtech

    $75.95
    Bondtech IFS Extruder for Prusa Mini  Bondtech Internal Filament Sensor Extruder for Prusa Mini This extruder is an evolution of Bondtech's previous high-resolution extruder upgrade for the Prusa Mini. Allows you to...
    SKU:
    BOND-PRUSA-M-K82
    Category:
    Bondtech Extruders
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $75.95
  • Hotend PTFE Tube

    PTFE tube for Hotend - MINI, MINI+ | Prusa

    Prusa Research OEM

    $1.99
    Hotend PTFE Tube This is the replacement hotend PTFE tube. It is ONLY compatible with the Original Prusa MINI and Mini+. Includes: Hotend PTFE tube (1 pcs) Specifications: Length: 43.4 mm Inner diameter: 2 mm Outer diameter: 4...
    SKU:
    PRUSA-PTFE-HE-0809
    Category:
    Extruder & Hotend
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $1.99
  • Performance 3D .30mm Apollo Series E3D Compatible Nozzle

    RepRap Nozzle P3-D Apollo Series - 0.30mm

    P3-D

    $18.99
    0.30mm Apollo Series E3D v6 Compatible Nozzle from Performance 3D Wear resistant high lubricity nozzles compatible with the popular E3D hotend extruders. For 1.75mm diameter filament Fits: Prusa i3 MK2 (with E3D v5 - v6 Hotend) Hexagon...
    SKU:
    P3D-E3D-030
    Availability:
    Sold in units of 1
    $18.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.15mm

    PB Select

    $7.99
    RepRap Nozzle Size: 0.15mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend RepRap Hotend    
    SKU:
    PBX-NZL-RR-015
    Availability:
    Sold in units of 1
    $7.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.20mm

    PB Select

    $6.99
    RepRap Nozzle Size: 0.20mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-020
    Availability:
    Sold in units of 1
    $6.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.30mm

    PB Select

    $5.99
    RepRap Nozzle Size: 0.30mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-030
    Availability:
    Sold in units of 1
    $5.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.40mm

    PB Select

    $5.99
    RepRap Nozzle Size: 0.40mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-040
    Availability:
    Sold in units of 1
    $5.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.50mm

    PB Select

    $5.99
    RepRap Nozzle Size: 0.50mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-050
    Availability:
    Sold in units of 1
    $5.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.60mm

    PB Select

    $5.99
    RepRap Nozzle Size: 0.60mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-060
    Availability:
    Sold in units of 1
    $5.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.80mm

    PB Select

    $5.99
    RepRap Nozzle Size: 0.80mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-080
    Availability:
    Sold in units of 1
    $5.99
  • MINI Double-sided Powder-coated Satin Spring Steel Sheet

    Satin PEI Powder Coated Spring Steel Sheet for MINI, MINI+ | Original Prusa

    Prusa Research OEM

    $44.95
    MINI Double-Sided Satin PEI Powder-Coated Spring Steel Sheet for Prusa MINI The Satin Spring Steel Sheet further expands the Prusa line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants...
    SKU:
    PRUSA-SSS-0809-SATIN
    Availability:
    Limited Stock
    Category:
    Build Plate
    Category:
    Print Surfaces
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $44.95
  • MINI Spring Steel Sheet With Smooth Double-sided PEI

    Smooth PEI Spring Steel Sheet for MINI, MINI+ | Prusa

    Prusa Research OEM

    $29.95
    Double-Sided Smooth PEI Spring Steel Sheet for Prusa MINI This is the replacement Spring Steel Sheet with smooth double-sided PEI for the Original Prusa MINI magnetic heatbeds. Includes: Spring Steel Sheet (1 pcs) Smooth PEI-Ultem sheet...
    SKU:
    PRUSA-SSS-0809-SMOOTH
    Availability:
    Limited Stock
    Category:
    Build Plate
    Category:
    Print Surfaces
    Feature:
    Smooth PEI
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $29.95
  • Double-sided Textured PEI Powder-coated Spring Steel Sheet for Prusa Mini

    Textured PEI Powder Coated Spring Steel Sheet for MINI, MINI+ | Original Prusa

    Prusa Research OEM

    $39.95
    Double-sided textured PEI powder-coated spring steel sheet for the Prusa Mini Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives...
    SKU:
    PRUSA-SSS-0809-TXT
    Availability:
    Limited Stock
    $39.95
  • Prusa Mini Bed Thermistor

    Thermistor for Heated Bed - MINI, MINI+ | Prusa

    Prusa Research OEM

    $8.99
    Heatbed Thermistor Set Includes: Heatbed thermistor E3D (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650 mm Fits: Mini Mini+ To replace this part, please consult the...
    SKU:
    PRUSA-THERM-BP-0809
    Category:
    Heaters & Thermistors
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $8.99
  • Original Prusa Timing Pulley

    Timing Pulley - I3 Series and MINI, MINI+ | Prusa

    Prusa Research OEM

    $3.99
    Timing Belt Pulley Includes:  Timing pulley T16-2GT (1 pcs) Grub screw (2 pcs) To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.
    SKU:
    PRUSA-PLY-01-09
    Category:
    Pulleys
    Fits:
    Prusa MK2
    Fits:
    Prusa MK2S
    Fits:
    Prusa MK2.5
    Fits:
    Prusa MK2.5S
    Fits:
    Prusa MK3
    Fits:
    Prusa MK3S
    Fits:
    Prusa MK3S+
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $3.99
  • Original Prusa Timing Pulley

    Timing Pulley - T16 2GT

    PB Select

    $2.59
    GT Timing Belt Pulley Includes:  Timing pulley T16-2GT (1 pcs) Grub screw (2 pcs) Size:  Tooth count: 16 Bore: 5mm For belt width of: 6mm Fits: Any printer that uses a 16 tooth pulley with 5mm bore Prusa MK2 Prusa...
    SKU:
    PBX-PRUSA-PLY-01-09
    Category:
    Pulleys
    Fits:
    Prusa MK2
    Fits:
    Prusa MK2S
    Fits:
    Prusa MK2.5
    Fits:
    Prusa MK2.5S
    Fits:
    Prusa MK3
    Fits:
    Prusa MK3S
    Fits:
    Prusa MK3S+
    Fits:
    Prusa MINI
    Fits:
    Prusa MINI+
    $2.59
  • Prusa U-Bolts

    U-Bolts | Prusa

    Prusa Research OEM

    $7.99
    U-Bolts U-bolts (3 pcs) Nylock nuts (6 pcs) Specifications: Thread: M3 Length: 26 mm Thread length: 7mm Distance between center of both tips: 20 mm Inside bend diameter: 16.5mm  Fits: MK2S MK2.5 MK2.5S MK3 MK3S MINI To...
    SKU:
    PRUSA-UBOLT
    Category:
    Build Plate
    Category:
    Hardware
    Fits:
    Prusa MK2S
    Fits:
    Prusa MK2.5
    Fits:
    Prusa MK2.5S
    Fits:
    Prusa MK3
    Fits:
    Prusa MK3S
    Fits:
    Prusa MINI
    $7.99