MINI/+

Please read our returns policy regarding electronic items PB Select™ Prusa Compatible Buddy Control Board This is a clone Buddy control board. If you are looking for the Original Prusa Buddy Board please click here. Firmware Version: 4.4...

PB Select™ Heat Bed Power Cable This is the cable that runs from the mainboard to heated bed on the Prusa MINI and MINI+ Includes: Cable (1 pcs)Terminal block plug (1 pcs) Specs:Wire: 16 awgLength: 18 inches (approximately)Ring terminals:...

Flat Cable for Prusa MINI/+ Connects LCD screen to Buddy board. Includes: Cable (1 pcs) Length: 300mm Fits:Prusa MINIPrusa MINI+

PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...

CopperBlock™ Hot Block for Prusa MINI Nickel composite coated copper hot block for increased thermal conductivity.  Includes:Copper heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+ Note: After...

PB Select™ Idler Springs for Prusa Extruder Latch & MMU2S/3 Includes: Idler spring (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MiniMini+MMU2SMMU3 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PB Select™ Heater Block for Prusa MINI Includes:Aluminum heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+  Note: After changing hotend parts, a PID tune is recommended. 

PB Select™ Heater Cartridge for Prusa MINI Consistent heating through the cartridge for better heat distribution to the heater block Includes: Heater cartridge (1 pcs) Specifications:Volts: 24 VDCWatts: 40Leads: 820mm silicone...

PB Select™ Idler Pulley Includes: Idler pulley (1 pcs) Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+MINIMINI+ To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PB Select™ Kapton & Aluminum Tape Used to attach the thermistor to the heated bed on Prusa and other 3D printers. Includes:Kapton Tape - adhesive backed, approximately 4x4 inches (1 pcs)Aluminum Tape...

Kapton and Aluminum Tape Used to attach the thermistor to the heated bed on Prusa 3D printers. Includes:Kapton Tape - adhesive backed, approximately 3X3 inches (1 pcs)Aluminum Tape...

Leadscrew Trapezoid Nut - Prusa MINI Compatible This POM leadscrew nut from LDO Motors is comparable to the OEM part.  Includes: Trapezoid nut (1 pcs) Specifications:Material: POM / AcetalThread: Tr8x8 Fits:MINIMINI+ To replace this...

X or Y Axis Smooth Rod Includes: Linear rod (1 pc) Specifications:G6 high precisionGcr15 steelHRC62 chrome platedDiameter: 8mmLength: 279 mm Location: X axis or Y axis Fits:MINIMINI+

Z Axis Smooth Rod Includes: Linear rod (1 pc) Specifications:G6 high precisionGcr15 steelHRC62 chrome platedDiameter: 10mmLength: 341 mm Location: Z axis Fits:MINIMINI+

PB Select™ M3 Stainless Steel Square Nuts These thin square nuts work in many applications that require a thinner (1.75mm) square nut. Including E3D Hemera Stepper Motors, Prusa Printers and Bondtech Extruders. Includes: Square Nut (10...

M3 Leaf Spring T-Slot Nut (3030) Plated roll-in t-slot nut with leaf spring. Includes: M3 T-Slot nut with leaf spring (5 pcs) Size:(Measured by hand - sizes are approximate)Length: 19.5mmWidth: 12mmHeight: 6.5mm Fits:3030 extrusionPrusa...

PB Select™ Brass Nozzle This premium brass nozzle will provide a smooth consistent print. Includes: Nozzle of selected size (1 pcs) For: 1.75mm diameter filament Fits:Prusa MK2Prusa MK2SPrusa MK2.5Prusa MK2.5SPrusa MK3Prusa...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...