MINI/+
Use the filter box below to narrow down the Prusa MINI/+ parts you are looking for:
-
M6 RepRap Nozzle - Micro Swiss A2 Steel
Micro Swiss
Now: $17.95Regular Price: $19.00Micro-Swiss E3D Compatible Nozzle, Plated A2 Tool Steel, M6 Threads Note: This nozzle is not compatible with the E3D Silicone Pro Sock. Use the standard silicone sock for this nozzle. This RepRap style nozzle is made...Now: $17.95Regular Price: $19.00 -
Magnet Set for Prusa Filament Sensor
PB Select™
Price: $4.99PB select™ Ball & Magnets for Prusa Filament Runout Sensor Includes:19x6x2mm magnet (1 pcs)10x6x2mm magnet (2 pcs)7mm steel ball (1 pcs)Price: $4.99 -
Magnetic Heatbed Assembly (24 volt) MINI, MINI+ | Prusa Compatible
PB Select™
Price: $59.95PB Select™ Magnetic 24 Volt Heated Bed Assembly for Prusa MINI/+ Notes:1. Only compatible with the Prusa MINI/+2. This is a Prusa compatible bed. If you want the Original Prusa bed please click here.3. Flexible spring steel...Price: $59.95 -
Magnetic Heatbed Assembly - MINI/+ | Original Prusa
PRUSA RESEARCH
Price: $79.95Prusa MINI/+ Heated Bed Assembly (24v) Magnetic heated bed for the Original Prusa MINI/+. All listed components are already assembled together. Includes:Magnetic heatbed MINI/+ 24V (1 pcs)Heatbed thermistor (already mounted and fixed in place by the...Price: $79.95 -
Molex Connector for Prusa Heater Cartridge, Heated Bed, PSU | Molex
PRUSA RESEARCH
Price: $2.49Molex™ Terminal Block Connector for Prusa Printers Includes: Molex connector - 15 amp (1 pcs)Screws (2 pcs) Used for hotend heater cartridge:MK2/SMK2.5/SMK3/S/+MINI/+) Used for heatbed heater:MK2/SMK2.5/S Used for PSU:MK2/SMK2.5/S To...Price: $2.49 -
Nozzle Coat | 4ml
PB Select™
Price: $14.99Nozzle Coat™ Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...Price: $14.99 -
Nozzle Torque Wrench - 3NM
PB Select™
Price: $26.95PB Select™ Preset Torque Wrench - 3NM E3D recommends tightening their V6 and Volcano nozzles to 2.5-3nm. Includes:Preset 3nm torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1...Price: $26.95 -
Nozzle Wrench for RepRap Nozzle
PB Select™
Price: $2.99Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D Etc) 5.5 mm5.0 mm4.5 mm (Sidewinder X3 Pro/Max) Fits:E3D V6 Nozzles7mm RepRap NozzlesArtillery Sidewinder X3 Pro/MaxBondtech...Price: $2.99 -
PEI (ULTEM) Sheet | Original Prusa
PRUSA RESEARCH
Price: $12.99Prusa PEI-Ultem sheet Notes: 1. This is NOT the Spring steel sheet with smooth double-sided PEI.2. Tiny dots may appear on the PEI-Ultem surface. These can slightly affect the finished print bottom surface. However, they do not...Price: $12.99 -
PEI Print Surface 186x186mm (7.3x7.3in) | ULTEM™ 1000
SABIC
Price: $7.95PEI Print Surface Includes: PEI sheet with 3M adhesive backing (1 pcs) Notes:1. This is NOT the Prusa spring steel sheet with smooth double-sided PEI (Link).2. Tiny dots may appear on the PEI surface. These can slightly affect the finished...Price: $7.95 -
PSU (Power Supply Unit) MINI, MINI+, SL1S, CW1/S | Original Prusa
PRUSA RESEARCH
Price: $69.95Power Supply Unit (PSU) Replacement power supply unit for the Original Prusa MINI/+, SL1S, and CW1/S. Includes: Power supply unit (1 pcs) Specifications:24 Volts150 Watts Note: this is the PSU only and does not include...Price: $69.95 -
PSU Holder M3nE Nut - 2 Pack | Prusa Compatible
PB Select™
Price: $2.99PB Select™ Prusa PSU Holder Nut - 2 Pack Nickel plated M3nE nut. Used to secure the PSU to the t-slot rail. Includes: M3nE Nut (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MK4MINIMINI+ To replace this part, please consult the Prusa Assembly Manuals...Price: $2.99 -
PTFE Fitting for MINI/+ | Original Prusa
PRUSA RESEARCH
Price: $2.99Prusa MINI PTFE Fitting PTFE Fitting for PTFE tube extruder and heatsink connections Includes: PTFE Fitting (1 pcs) Fits:MINIMINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...Price: $2.99 -
PTFE Fittings Set for Prusa Mini | Bondtech
Bondtech
Price: $14.90PTFE Fittings Set for Prusa Mini Use this set to simplify the install, use and maintenance of Prusa Mini’s bowden tube.Instead of using 3 PTFE tube sections, use one only.Includes push-fit collets for ease of use and effective hold of the...Price: $14.90 -
PTFE Tube - Extruder to Print Head - MINI/+ | Original Prusa
PRUSA RESEARCH
Price: $4.99Prusa MINI PTFE Tube - Extruder to Print head Runs from the extruder to the print head. Includes:Extruder-Print head PTFE tube (1 pcs) Swivel nut (2 pcs)Pressed olive part (2 pcs) Specifications:Length: 275 mmInner diameter: 2 mmOuter...Price: $4.99 -
PTFE Tube for Extruder - MINI/+ | Original Prusa
PRUSA RESEARCH
Price: $2.49Pre-Extruder PTFE Tube This PTFE tube runs from the extruder to filament spool. Included: PTFE tube (1 pcs) Specifications:Length: 150 mmInner diameter: 2 mmOuter diameter: 4 mm Fits:MINIMINI+ To replace this part, please consult the Prusa Assembly...Price: $2.49 -
PTFE Tube for Hotend - MINI/+ | Original Prusa
PRUSA RESEARCH
Price: $2.99Prusa MINI Hotend PTFE Tube This is the hotend PTFE tube. Includes: PTFE tube (1 pcs) Specifications:Length: 43.4 mmInner diameter: 2 mmOuter diameter: 4 mm Fits:MINIMINI+ Note: This is ONLY compatible with the Original Prusa MINI and...Price: $2.99 -
Push Fit Connector PC4-M8
OXD
Price: $2.99PC4-M8 Push Fit Connector For use with Capricorn or similar PTFE tubing. Includes: Push Fit Connector (1 pcs) Fits:Prusa MINIPrusa MINI+ Notes:The internal depth of this fitting is not as deep as the stock fitting, so you may need to...Price: $2.99 -
Revo Brass High Flow Nozzle | E3D
E3D
Price: $44.95Revo™ High Flow Brass Nozzle The Revo High Flow Nozzle increases your setup's volumetric flow rate, enabling you to print faster. Revo High Flow maintains the exact same form factor as standard Revo Hotends. This means there is no need...Price: $44.95 -
Revo Brass Nozzle | E3D
E3D
Price: $24.95 - $64.95Revo™ Brass Nozzle Single Nozzle Includes: Revo nozzle of selected size (1 pcs)ORTriple pack includes: 1 each of 0.25, 0.60 & 0.80mm nozzles Fits: All E3D Revo hotends Notes: - You may need to adjust your Z offset when changing...Price: $24.95 - $64.95