Adventurer 4/Pro
Use the filter box below to narrow down the Adventurer 4/Pro parts you are looking for:
-
3D Print Removal Tool - Scraper
Flashforge
$3.99Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers. Includes: Spatula (1 pcs)$3.99 -
3D Print Removal Tool - Scraper | Artillery
Artillery
$4.993D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer. Includes: Scraper (1 pcs)$4.99 -
Air Duct (Print Cooling) - Adventurer 4 | Flashforge
Flashforge
$6.99Air Duct and Print Head Bottom Cover Directs air to the part being printed and holds the LED light and nozzle latches in place. Includes: Air duct (1 pcs) Fits: Adventurer 4 Note: Does not include mounting screw$6.99 -
Air Duct for Print Cooling - Adventurer 3 Pro 2, Adventurer 4 Pro | Flashforge
Flashforge
$8.95Flashforge Hotend Air Duct Directs air to the part being printed. Includes: Air duct (1pcs) Fits: Adventurer 3 Pro 2Adventurer 4 Pro Note: Does not include mounting hardware.$8.95 -
Air Filter - Adventurer 4, Guider 3 | Flashforge
Flashforge
$8.95Flashforge Air Filter Includes: HEPA & Charcoal filter Fits:Adventurer 4Guider 3Guider 3 PlusCreator 4$8.95 -
Build Plate Base (Magnetic) - Adventurer 4 | Flashforge
Flashforge
$69.95Flashforge Magnetic Build Plate Base For use with Flashforge flexible build plate (not included) Includes: Magnetic build plate base (1 pcs) Fits: Adventurer 4 Note: If you are upgrading from a glass build plate you will also need the plastic...$69.95 -
Build Plate Frame for Glass Bed - Adventurer 4/Lite | Flashforge
Flashforge
$19.95Flashforge Build Plate Frame for Glass Bed This is the frame that holds the glass bed in place. Includes: Plastic frame (1 pcs) Fits:Adventurer 4 LiteAdventurer 4 (with glass bed) Notes:This frame will not work with the magnetic bed. You will...$19.95 -
Build Plate Frame for Magnetic Bed - Adventurer 4 | Flashforge
Flashforge
$19.95Flashforge Build Plate Frame This is the frame that holds the magnetic base in place. Includes: Plastic frame (1 pcs) Fits: Adventurer 4 Notes: This frame will not work with the glass bedMounting hardware not included Little...$19.95 -
Build Plate Heater - Adventurer 4 Pro | Flashforge
Flashforge
$36.95Build Plate Heater for Flashforge Adventurer 4 Pro Includes: Heater (1 pcs) Fits: Adventure 4 Pro$36.95 -
Build Plate Heater - Adventurer 4 | Flashforge
Flashforge
$39.95Build Plate Heater for Flashforge Adventurer 4 Includes: Heater (1 pcs) Fits: Adventure 4$39.95 -
Build Plate Leveling Sensor - Adventurer 3 Pro 2, Adventurer 4 Pro | Flashforge
Flashforge
$24.95Bed Leveling Sensor Switch Includes: Sensor (1 pcs) Fits:Adventurer 3 Pro 2Adventurer 4 Pro$24.95 -
Cable for Extruder Motor - Adventurer 3/4, MP Voxel, Robo E3 | Flashforge
Flashforge
$6.99Flashforge Extruder Motor Cable Runs from extruder motor to mainboard. Length: 62cm Includes: Cable (1 pcs) Fits: Adventurer 3Adventurer 4Monoprice VoxelRobo E3$6.99 -
Cable for Filament Sensor - Adventurer 3/4, MP Voxel, Robo E3 | Flashforge
Flashforge
$6.99Flashforge Filament Sensor Cable Runs from filament sensor to mainboard Includes: Cable (1 pcs) Fits:Adventurer 3Adventurer 4Monoprice VoxelRobo E3$6.99 -
Cable for Nozzle Heating - Adventurer 3/4, Voxel, Robo E3 | Flashforge
Flashforge
$4.99Nozzle Heating Cable Connects nozzle to transfer board. Length: 6cm Includes: Cable (1 pcs) Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4Adventurer 4 ProMonoprice VoxelRobo E3$4.99 -
Cable for Touch Screen - Adventurer 4 | Flashforge
Flashforge
$9.99Flat Cable for TFT Touch Screen Connects touch screen to mainboard Includes: Cable (1 pcs) Fits: Adventurer 4 WARNING Pay attention to the orientation of your current cable.Plugging this cable in backwards will...$9.99 -
Cable for USB Port - Adventurer 4 | Flashforge
Flashforge
$8.99Flashforge Cable for USB Port Runs from USB port to the mainboard. Includes: Cable (1 pcs) Fits: Adventurer 4$8.99 -
Cable for X Axis Motor - Adventurer 4 | Flashforge
Flashforge
$9.95Flashforge X Motor Cable This cable runs from the mainboard to the X axis stepper motor that moves the left extruder Includes: Cable (1 pcs) Fits: Adventurer 4$9.95 -
Cable for Y Limit Switch - Adventurer 4 | Flashforge
Flashforge
$9.95Flashforge Y Limit Switch (Build Plate Endstop) Cable Includes: Cable (1 pcs) Fits: Adventurer 4$9.95 -
Cable for Z Axis Stepper Motor - Adventurer 4 | Flashforge
Flashforge
$7.99Flashforge Z Axis Stepper Motor Cable Runs from Z stepper motor to mainboard Fits: Adventurer 4$7.99 -
Cable for Z Limit Switch (Endstop) - Adventurer 4 | Flashforge
Flashforge
$9.95Flashforge Y Limit Switch (Endstop) Cable Includes: Cable (1 pcs) Fits: Adventurer 4$9.95