Dreamer
Use the filter box below to narrow down the Dreamer parts you are looking for:
-
Heater Cartridge - Dreamer, Inventor | Flashforge
Flashforge
Price: $13.95Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Voltage: 24VDC Watts: 40 Fits:DreamerInventorPrice: $13.95 -
Heatsink for Creator Pro/Max, Dreamer/NX, Inventor | Flashforge
PB Select™
Price: $6.99PB Select™ Heatsink Includes: Heatsink (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventorPrice: $6.99 -
Hex Wrench - Ball End - 2.0mm
Flashforge
Price: $1.29Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mmPrice: $1.29 -
Hex Wrench - Ball End - 2.5mm
PB Select™
Price: $1.29PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mmPrice: $1.29 -
Kapton Tape - 5mm Wide, 33 Meters Long
PB Select™
Price: $3.99Heat Resistant Kapton Tape Use this tape to secure the insulation to your Flashforge heater block. Includes: Tape roll (1 pcs) Width: 5mm Length: 33 metersPrice: $3.99 -
Leadscrew Nut - Adventurer 4 | Flashforge
Flashforge
Price: $4.99Flashforge Leadscrew Nut Includes: Leadscrew nut (1 pcs) Fits:Adventurer 4Price: $4.99 -
LED Board (Light Strip) Creator Pro, Dreamer , Inventor | Flashforge
Flashforge
Price: $9.95LED Board - Light Strip for Flashforge 3D Printers Includes: LED light strip (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventorPrice: $9.95 -
Limit Switch Y Axis - Inventor 2, Dreamer | Flashforge
Flashforge
Price: $9.95Flashforge Limit Switch (Endstop) Includes: Limit switch (1 pcs) Location: Y axis Fits:Inventor 2DreamerDreamer NXPrice: $9.95 -
Linear Bearing LM8SUU (4 Pack) | MYT
MYT®
Price: $13.95MYT LM8SUU Linear Bearings for Flashforge and other 3D Printers Includes: Bearing (4 pcs) Specifications:ID: 8mmOD: 15mmL: 17mm Fits:Creator ProCreator pro 2Creator MaxCreator Max 2DreamerDreamer NXInventorInventor 2FinderFinder...Price: $13.95 -
Linear Flange Bearing LMH10LUU (Z axis) | MYT
MYT®
Price: $12.95LMH10LUU Linear Flange Bearing Includes: Linear Bearing (1 pcs) Includes: Bearing (1 pcs) Specifications:ID: 10mmOD: 19mmL: 55mm Fits:Creator ProCreator MaxInventorDreamerDreamer NXPrice: $12.95 -
Linear Rod - X Axis - Dreamer , Inventor | Flashforge
Flashforge
Price: $7.95Flashforge Linear Rod Includes: Linear rod (1 pcs) Location: X Axis Fits:DreamerDreamer NXInventorPrice: $7.95 -
Linear Rod - Y Axis - Dreamer, Inventor | Flashforge
Flashforge
Price: $7.95Flashforge Linear Rod Includes: Linear rod (1 pcs) Location: X Axis Fits:DreamerDreamer NXInventorPrice: $7.95 -
M3x40 Motor Mount Bolt - Creator Pro, Inventor, Dreamer | 4 Pack
PB Select™
Price: $1.99Motor Mount Bolt for Creator Pro, Inventor and Dreamer Holds the fan, heatsink and motor to the mounting block Includes: M3x40 socket head cap screw (4 pcs) Size: M3x40 Fits:Creator ProCreator MaxInventorDreamer Note: These do not fit the Dreamer NX...Price: $1.99 -
Magnet for Flexible Build Plate - 154*232mm | Creator Pro/2, Creator Max/2, Dreamer, Inventor
PB Select™
Price: $9.95Replacement Magnet sheet for 154*232mm DFlex™ Build Plate Includes: Sheet magnet with adhesive backing (1 pcs) Size: 154*232mmMax temperature: 90c Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2InventorDreamerDreamer NXPrice: $9.95 -
Mainboard - Dreamer | Used
Flashforge
Regular Price: $189.95Price: $129.95Please read our returns policy regarding electronic items Used Item Mainboards are removed from low hour 3D printers (under 60 hours). Flashforge Dreamer Mainboard Includes: Mainboard w/Micro SD card (1...Regular Price: $189.95Price: $129.95 -
MK10 All Metal Hotend Kit | MicroSwiss
Micro Swiss
Price: $37.75MK10 All Metal Hotend Kit - Micro Swiss The Micro Swiss all metal hotend allows you to print at much higher temperatures than with PTFE-lined hotend. All metal hotends offer more consistent melt chamber control. During slow extrusion rates...Price: $37.75 -
MK10 Brass Nozzle
PB Select™
Price: $9.95MK10 Brass Nozzle for PTFE Lined Hotend Includes: Nozzle (1 pcs) Size: Select Above Fits:Flashforge Guider 2 (not high temp version)Flashforge InventorFlashforge Inventor 2SFlashforge Creator ProFlashforge Creator MaxFlashforge...Price: $9.95 -
MK10 Brass Nozzle (Only Compatible with Micro Swiss All Metal Hotend)
PB Select™
Price: $7.95MK10 Brass Nozzle (for Micro Swiss All Metal Hotend Only) Note: Will not fit the stock PTFE lined hotend. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube...Price: $7.95 -
MK10 Micro Swiss Nozzle (for PTFE Lined Hotend*)
Micro Swiss
Price: $14.99MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend This nozzle is for PTFE lined hotends only. It has a larger diameter hole in the top, so the PTFE tube can slide into the nozzle. It will not work with all metal hotends...Price: $14.99 -
MK10 Micro Swiss Nozzle for All Metal Hotend Kit*
Micro Swiss
Price: $14.99MK10 Plated Wear-Resistant Nozzle for Micro Swiss All Metal Hotend Kit If you are printing abrasive material, such as carbon fiber, stainless steel, wood-filled or any other metal filled filaments, this will greatly improve the life of your...Price: $14.99