E3D

E3D High Flow ObXidian™ Hotend for Bambu Lab X1/P1 Series - 0.40mm

SKU:
E3D-HE-BAMBU-040
Condition:
New
Maximum Purchase:
1 unit
  • E3D High Flow ObXidian™ HotEnd for Bambu Lab X1/P1 Series - 0.40mm
  • E3D High Flow ObXidian™ HotEnd for Bambu Lab X1/P1 Series - 0.40mm
$84.95

Out of Stock

Description

E3D Reseller Badge

High Flow ObXidian™ Hotend for Bambu Lab X1/P1 Series

E3D & Bambu Lab ObXidian High Flow Hotends are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant hotends to date.

Includes:
 0.40mm  High Flow ObXidian hotend (1 pcs)
Thermal grease (1 pcs)
Silicone sock (1 pcs)
Heater retaining spring (1 pcs)
Bolts (2 pcs)

Note: For 1.75mm filament only

Fits:
Bambu Lab X1
Bambu Lab X1 Carbon
Bambu Lab X1E
Bambu Lab P1S
Bambu Lab P1P

Documentation:
Bambu Lab X1 Upgrade Guide
Bambu Lab P1P/P1S Upgrade Guide

FAQ

What is the maximum printing temperature? 
300 °C 
Can you cold pull the E3D ObX HF Bambu Hotend? 
Yes, you can! The ObXidian coating is designed to withstand the force of a cold pull, however it can be a little bit challenging compared to a typical nozzle due to the internal construction. 
Are there any material limitations?  
Any filament you can print with our Revo and V6 ObXidian nozzles can be used with this upgrade. Typically aimed at fiber filled filaments, glow in the dark and glitter filled filaments, these nozzles should provide you a reliable choice. Short periods of metal and ceramic filled filaments can be used but may still wear over prolonged use. 
Do I need to PID tune when I upgrade to the E3D ObX HF Bambu Hotend?  
No, you don’t need to! 
Is this compatible with E3D Revo Nozzles? 
These Hotends are designed to maintain the exact same form factor as the stock Bambu nozzles and are therefore not compatible with the Revo range of nozzles. If this is something you are interested in we recommend you have a look at the Revo Panda, which is a Revo compatible Hotend by Biqu.

View AllClose

Additional Information

PSC:
Extruder & Hotend Parts (Print Head)
PSU:
E3D
GPC:
Extruder & Hotend Parts (Print Head)
Nozzle Size:
0.40mm
TBC:
E3D
Brand Name:
E3D
View AllClose