Hot Ends

Hot Ends

Browse our 3D printer hotend selection, including MakerGear V4 and INTAMSYS hotends and the Mosquito Hotend from Slice Engineering (coming soon!).

  • Fiberglass insulation  for MakerGear 3D printer V4 Hotend MakerGear fiberglass insulation

    MakerGear

    Fiberglass Insulation for V4 Hot End | MakerGear

    $2.99
    Fiberglass Insulation for your MakerGear Hot End Insulation maintains your hot end's temperature and prevents potential burn injuries Expandable and rubber-coated Suitable for both the V4 and V3b Hot Ends *Individually sold fiberglass...
    $2.99
  • Sold Out
    Heater Cartridge for FUNMAT HT 3D Printer Heater Core for INTAMSYS 3D Printer

    INTAMSYS

    Heater Cartridge V2 | FUNMAT HT

    $15.00
    Heater Cartridge for your INTAMSYS FUNMAT HT printer.  This nozzle heater is version 2 with a green plug. 
    $15.00
  • INTAMSYS hot end kit

    INTAMSYS

    High Temp Hot-End Kit V1 | FUNMAT HT

    $129.00
    High Temperature Hot End Kit for INTMASYS FUNMAT HT Printer Comes with a .40mm nozzle. Note: This is the V1 hot end kit with the the older style (single black) plug. Please check the color of the plug on your current hot end. If it is black, this is...
    $129.00
  • V2 Hot end kit for FUNMAT HT 3D Printer Intamsys 3D Printer Hot End Kit V2

    INTAMSYS

    High Temp Hot-End Kit V2 | FUNMAT HT

    $129.00
    High temperature hot end kit for INTAMSYS FUNMAT HT - Version 2 Comes with a .40mm nozzle. Note: This is the V2 hot end kit with the the newer style (blue and green) plugs. Please check the color of the plugs on your current hot end. If you have...
    $129.00
  • INTMASYS FUNMAT HT replacement hot end with .40 nozzle.

    INTAMSYS

    Low Temp Hot End Kit V1 | FUNMAT HT

    $129.00
    Low Temperature Hot End Kit for the INTMASYS FUNMAT HT - Version 1  This low temp hot end is for printing at standard temperatures and should not be used for high temp materials such as PEEK. Comes with a .40 nozzle. Note: This is the V.1 hot...
    $129.00
  • Sold Out

    INTAMSYS

    Low Temp Hot-End Kit V2 | FUNMAT HT

    $129.00
    Low temperature hot end kit for standard filament for your INTAMSYS FUNMAT HT - Version 2 Comes with a .40mm nozzle. Note: This is the V2 hot end kit with the the newer style (blue and green) plugs. Please check the color of the plugs on your...
    $129.00
  • Mosquito Hot End Slice  Engineering Hotend

    Slice Engineering

    Mosquito Hotend | Slice Engineering

    $144.95
    Mosquito Hotend from Slice Engineering For 1.75mm diameter filament Superior heat break performance Increased structural rigidity Larger temperature operating range Adaptable to almost any FFF/FDM printer Ideal for multi-extrusion...
    $144.95
  • MakerGear V4 Cartridge Heater

    MakerGear

    V4 Cartridge Heater | MakerGear

    $20.00
    Replacement V4 Cartridge Heater for your MakerGear Printer A replaceable heating element for the V4 Hot End. If your hot end is not able to maintain temperature, it might be time to replace the cartridge heater. Because this component endures a large...
    $20.00
  • MakerGear V4 Hot End with .35 brass nozzle and silicone sock MakerGear V4 Hot End with .35 brass nozzle

    MakerGear

    V4 Hot End with 0.35mm Brass Nozzle | MakerGear

    $85.00
    Replacement V4 Hot End for your MakerGear M2 or M3 printer This V4 Hot End ships fully-assembled, ready-to-install, and includes: 1 - V4 Cartridge Heater 1 - Thermistor 1 - V4 Heater Block 1 - Rubber-coated fiberglass insulation 1 - 0.35 mm brass...
    $85.00