MK3S

Revo™ ObXidian High Flow Nozzle The Revo High Flow ObXidian combines the Obxidian and High Flow features into one nozzle. Includes: Revo nozzle of selected size (1 pcs) High Flow Features: The Revo High Flow nozzle increases your...

623ZZ Roller Bearing A nice quality roller bearing from E3D. Metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 3mmOD: 10mmW: 4mm Fits: Hemera (motor/heatsink)

Microswiss CM2 Nozzle The Microswiss CM2™ Nozzle is an ideal nozzle for all applications. The core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its...

E3D Collet Clip Only fits this collet for 4 mm PTFE Tube. Includes: Collet clip (2 pcs) FitsE3D V6E3D Revo SixE3D Revo MiniE3D CRPrusa Bondtech

Prusa Specific E3D V6 Hotend (24 volt) The only difference between the MK3/MK3S/MK3S+ hotend versions is the PTFE tube. By selecting your printer model above, you will get a hotend with the proper PTFE tube for your printer.  Includes...

E3D Revo™ Kit for Prusa MK3 Series (MK3, MK3S, MK3S+) The Revo™ Prusa kit is a drop-in replacement, giving you all the benefits of E3D’s Rapid Change Revo ecosystem in an easy-to-upgrade package. The E3D Revo kits come in two...

Revo Cable Set for Revo Six Prusa Edition Includes: Heater cable (1 pcs)Thermistor cable (1 pcs) Fits (fits below printers with the Revo Six hotend upgrade):Prusa MK2Prusa MK2SPrusa MK2.5Prusa MK2.5SPrusa MK3Prusa MK3SPrusa MK3S+

E3D Prusa Specific Titanium Heat Break Similar to the heat break that comes stock on many Original Prusa 3D printers, but these are titanium for lower thermal transfer to the coldside. Includes: Prusa specific titanium heat break (1...

E3D Prusa Specific Heat Break Depending on availability we get these from E3D or Prusa ResearchThis is the heat break that comes stock on many Original Prusa 3D printers. Includes: Prusa specific heat break (1 pcs) Fits:MK2MK2SMK2.5MK2...

  E3D Universal V6 1.75mm Heat Sink with Collet Designed to work with both Bowden and Direct Drive Hotends Includes:Heat sink for 1.75mm V6 Hotends (1 pcs)Collet with blue clip (1 pcs) Fits:E3D V6 HotendPrusa MK2/2.5/SPrusa MK3/S/S+

Microswiss E3D Compatible Nozzle, Plated A2 Tool Steel, M6 Threads  Note: This nozzle is not compatible with the E3D Silicone Pro Sock. Use the standard silicone sock for this nozzle. This RepRap style nozzle is made...

E3D 4mm Push Fit Collet (Collar) High quality replacement push fit collet with metal teeth. These are the small collets that fit E3D V6 and Prusa heatsinks. Includes: Collet (1 pcs)  Size:ID: 4mmOD: 5mm Fits: Bondtech ExtrudersE3D V6...

Revo™ High Flow Brass Nozzle The Revo High Flow Nozzle increases your setup's volumetric flow rate, enabling you to print faster. Revo High Flow maintains the exact same form factor as standard Revo Hotends. This means there is no need...

Revo™ Brass Nozzle Single Nozzle Includes: Revo nozzle of selected size (1 pcs)ORTriple pack includes: 1 each of 0.25, 0.60 & 0.80mm nozzles Fits: All E3D Revo hotends Notes: - You may need to adjust your Z offset when changing...

Revo Coldside Only - For Prusa MK2 and MK3 Series  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:1 x Revo Six...

Revo™ HeaterCore (With 104NT Thermistor) Includes:Heater cartridge/thermistor (1pcs)Spring (1 pcs)Silicone boot (1 pcs) Notes: Choose the correct voltage and wattage for your application.Before installing please read the HeaterCore wiring...

Revo High Flow, High Temp Abrasive (HF HT-A) Nozzle HF HT-A nozzles are high-temperature, high flow, abrasion-resistant nozzles. Much like ObXidian, these nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the...

Revo Starter Pack - 24 Volt  Note 1:  Please take care when making your product selection.The 104NT (E3D) comes with an E3D 104NT thermistor.The 100K (Creality) comes with a Creality specific HeaterCore and is not compatible with other...

Revo High Flow or High Flow X Hotside Pack - 24 Volt, 60 Watt  Note:  These hotsides come with an integrated E3D 104NT thermistor. Make sure this is the correct thermistor for your printer before ordering. This is not a...

Revo™ ObXidian Nozzles The Revo ObXidian is specifically designed for printing fibre-filled polymers. ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the...