MMU2S/MMU3

Leadscrew Trapezoid Nut - Prusa Compatible This POM leadscrew nut from LDO Motors is comparable to the OEM part.  Includes: Trapezoid nut (1 pcs) Specifications:Material: POM / AcetalThread: Tr8x8 Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+MK3...

Prusa Lubricant Applicator Set Includes: Lubricant 5g (1 pcs)Applicator (1 pcs) After a certain period of time (see the 3D Printing Handbook), your printer should be cleaned and greased in order to work properly.  No need to apply...

PB Select™ M3 Stainless Steel Square Nuts These thin square nuts work in many applications that require a thinner (1.75mm) square nut. Including E3D Hemera Stepper Motors, Prusa Printers and Bondtech Extruders. Includes: Square Nut (10...

Prusa OEM Festo (Push Fit) Connector Includes: M5-4 Festo fitting (1 pcs) Fits: MMU2SMMU3Prusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

Main Plate Set MMU3  Important  Main-plate for the MMU3 differs from the main-plate used in the stock single-material MK4/MK3.9. Includes: Main plate (1 pcs)O-ring (1 pcs) Fits: Prusa MMU3 To replace this parts, please consult the...

Original Prusa MMU PD-board addon Includes: PD-board (1 pcs) Fits:Prusa MK3S+Prusa MK3.5Prusa MMU3 To replace This part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

MMU3 Printer Cable for Einsy This cable is used to connect the MMU3 unit and the printer. Includes: Cable (1 pcs) Fits: Prusa MK3S+Prusa MMU3 To replace this parts, please consult the Prusa Assembly Manuals. Make sure to follow...

MMU3 Printer Cable for MK3.5/3.9/4 This cable is used to connect the MMU3 unit and the printer. Includes: Cable (1 pcs) Fits: Prusa MK3.5Prusa MK3.9Prusa MK4Prusa MMU3 To replace this parts, please consult the Prusa Assembly Manuals. Make...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Pin 2.9x8.5mm Includes: Pin (1 pcs) Fits: Prusa MMU3 To replace this parts, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

Prusa MMU2S-Einsy power cable Replacement MMU2S to Einsy power cable.  Includes: Cable (1 pcs) Fits:MK3 with MMU2SMK3S with MMU2SMK3S+ with MMU2S Note: Only compatible with the MK3/S/+. NOT compatible with MK2.5/S printers. To...

Prusa Buffer Tube - PTFE This is a replacement PTFE tube for the MMU2S unit to the Filament Buffer. Includes: PTFE tube (1 pcs) Specifications:Length: 650 (tolerance +/- 1.0 mm)Inner diameter: 2 mmOuter diameter: 4 mm Fits: MMU2S To...

PB Select™ PTFE Tube for Prusa MMU2S  This is the replacement PTFE tube for the MMU2S Front-PTFE-holder. Includes: PTFE tube (1 pcs) Note: This is the 19mm PTFE tube only, it does not include the PTFE holder (pictured)...

Prusa Hotend PTFE Tube This is the replacement hotend PTFE tube. Includes: Hotend PTFE tube (1 pcs) Note: This is only compatible with the MK2.5S, MK3S and MMU2S hotends. It is not compatible with the MK2.5, MK3 and MMU2 hotends...

Prusa Hotend PTFE Tube Includes: Hotend PTFE tube (1 pcs) Specifications:Length: 50 (tolerance +/- 0.2 mm)Inner diameter: 1.85 mmOuter diameter: 4 mm Fits:MK2MK2SMK2.5MK3MMU2 Note: Not compatible with the MK2.5S, MK3S, MK3S+ or MMU2S...

Prusa Hotend PTFE Tube This is a replacement hotend PTFE tube. Includes: Hotend PTFE tube (1 pcs) Specifications:Length: 42.3 mm (tolerance +/- 0.2 mm)Inner diameter: 1.85 mmOuter diameter: 4 mm Fits:MK3S+MK3S+ with MMU2SMK3S+ with...

Pulley Motor Includes: Pulley motor (1 pcs) Specifications:Connector: MOLEX 50-57-9404Rated current: DC 1A Fits:MMU2SMMU3 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

E3D 4mm Push Fit Collet (Collar) High quality replacement push fit collet with metal teeth. These are the small collets that fit E3D V6 and Prusa heatsinks. Includes: Collet (1 pcs)  Size:ID: 4mmOD: 5mm Fits: Bondtech ExtrudersE3D V6...

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...

Selector Motor for MMU2S/MMU3 Includes:Selector motor (1 pcs)Trapezoid nut (1 pcs) Specifications:Connector: MOLEX 50-57-9404Rated current: DC 1A Fits:MMU2SMMU3 To replace this part, please consult the Prusa Assembly Manuals. Make sure to...