Parts, Accessories & Supplies

Bondtech LGX® Lite Large Gears eXtruder (motor not included) The Bondtech LGX® Lite is based on the LGX® Large Gears eXtruder and uses Bondtech’s new Dual Drive Technology based on larger drive gears...

BuildTak PEI Sheets Size: 304x304mm (12x12 inches) Includes: PEI Sheet (2 pcs) Fits:Creality CR-10 seriesFT-5Black WidowAny 3D printer with a 12x12 inch print bed Manufactured right here in the USA to ensure consistent quality and composition,...

  All Metal Hotend Kit with Slotted Cooling Block for Wanhao i3 This upgrade includes a modified thermal barrier tube, nozzle and cooling block. The thermal barrier tube is made from 2 different materials: The lower thermal break is made from...

DDX Adapter Set For Creality Ender-3 / CR-10 Note: Does not fit DDX V3 This set is necessary to install a DDX Upgrade Kit on the models listed below. Fits: Ender-3 CR-10 CR-10S CR-10 S4 CR-10 S5 Requires your printer to have a 40x40x10mm Radial Fan...

  Micro Swiss Dual Gear Bowden Extruder This Bowden Dual Gear Extruder features the same quality construction as the Micro Swiss Direct Drive extruders. It is designed to be a bolt-on replacement to most of...

Magigoo 3D Printing Adhesive Magigoo ensures strong adhesion to a hot print surface, but easy release when the print surface cools down.Non-toxic and easy to clean with water. Size: 120ml  Includes: Magigoo original (1 bottle) Works with:...

E3D V6 ObXidian Nozzle V6 nozzles are designed for use with the E3D V6 heater block. Use small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger 3D prints. Includes: Nozzle of selected size (1...

Revo™ High Flow Brass Nozzle The Revo High Flow Nozzle increases your setup's volumetric flow rate, enabling you to print faster. Revo High Flow maintains the exact same form factor as standard Revo Hotends. This means there is no need...

DDX v3 Adapter Set for Creality CR-10S Pro/Max This set is necessary to install a DDX Upgrade Kit on the models listed below. Creality CR-10S Pro Creality CR-10S Pro V2 * - BLTouch bracket needed Creality CR-10 Max * - BLTouch bracket...

BuildTak FlexPlate System Size: 165x165mm (6.5x6.5in) Includes:  Original BuildTak print surface (1 pcs) Spring steel sheet (1 pcs) Magnetic base (1 pcs) Fits:  Ender 2 printers with a 165x165 print bed

 Important Shipping Notes - Ships to the US and Canada only- Cannot be shipped to PO boxes - Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada- Only ships UPS/FedEx ground, no...

Bondtech CHT BiMetal Nozzle - M6 Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Includes: Nozzle of...

DDX v3 Adapter Set For Creality Ender and CR-10 Note: Only fits DDX v3 This set is necessary to install a DDX v3 upgrade kit on the models listed below. Compatibility Table To use with 40x40x10 fans on: Creality Ender-3 Ender-3 v2 Ender-3 Pro Creality...

Bondtech LGX™ X-Carriage Prusa MK3S This LGX™ X-carriage is required to install the Bondtech LGX for MK3S & Mosquito Includes: SLS X-Carriage Front (1 pcs)SLS X-Carriage Rear (1 pcs)M3x10 Screws (5 pcs)M3 square nut (5 pcs)M3...

  SLS X-Carriage kit for Prusa i3 MK3S Note: This X-Carriage kit is required to install the Bondtech Upgrade Kit for Prusa. This is very similar to the original X-Carriage Kit. The main difference is the 3D printed technology used to...

Micro Swiss All Metal Hotend Kit - 0.40mm Includes:0.40mm plated brass wear-resistant nozzle (1 pcs)Heat break (1 pcs)Jam nuts - to aid in removing old hotend (1 pcs) Description:The Micro Swiss all metal hotend allows you to print at much higher...

MK10 All Metal Hotend Kit - Micro Swiss The Micro Swiss all metal hotend allows you to print at much higher temperatures than with PTFE-lined hotend.  All metal hotends offer more consistent melt chamber control. During slow extrusion rates...

Revo™ HeaterCore for Creality Sprite - 24 volt This is a special Revo HeaterCore intended for use with the Revo Sprite. It uses a 40W heater and a 100K NTC thermistor, which has the same response as a stock Creality thermistor, saving...

Revo™ CR HeaterCore for Creality - 24 volt This is a special Revo HeaterCore intended for use with the Revo CR. It uses a 40W heater and a 100K NTC thermistor, which has the same response as a stock Creality thermistor, saving you the...

BuildTak PEI Sheets Size: 254x254mm (10x10 inches) Includes: PEI Sheet (2 pcs) Fits:Robo R1Robo R1+Printrbot PlusAny 3D printer with a 10x10 print bed Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak...