PB3D Parts™

PB3D Parts™

  • Robo R1/+ bed magnets - 6MM

    6mm Bed Magnets (4 Pack) - R1 and R1 Plus | Robo 3D

    PB3D Parts™

    $2.99
    6mm Bed Magnets for R1/+ Glass Bed Please note: These magnets are 6mm thick work with both earlier beds and the latest v2.5 R1 bed, which requires 6mm magnets. Apply using epoxy and these...
    SKU:
    R1-BED-MAG-4P-6MM
    Fits:
    Robo R1+
    $2.99
  • Print Surface Applicator Squeegee

    Print Surface Applicator Squeegee

    PB3D Parts™

    $2.99
    Print Surface Applicator with Felt Please note: We include one of these free with every BuildTak Flexplate System.  Use this squeegee to remove air bubbles from you print surface as you apply...
    SKU:
    PBX-PSA
    $2.99
  • Cable Wrap

    Self Closing Wire Wrap (PET) 10mm Diameter

    PB3D Parts™

    $1.49
    Expandable Braided Cable Sleeve Sold by the foot: For example, if you order a qty of 3 you will get one 3 foot piece. This PET self closing wire wrap has a "cloth like" feel and is great for...
    SKU:
    PBX-WW-10MM
    Availability:
    SOLD BY THE FOOT - Please Read Below
    $1.49
  • M4X4 set screw 12.9

    Set Screw for Hotend | Flashforge

    PB3D Parts™

    $0.79
    M4X4 Set Screw 12.9 Grade Cup Point Uses 2mm Hex Key Driver Used to secure the heater cartridge in the heater block of Flashforge 3D printers. Fits: Finder (all) Guider...
    SKU:
    PBX-SS-M4X4CP
    Fits:
    Creator Pro
    Fits:
    Creator Max
    Fits:
    Inventor
    Fits:
    Inventor 2
    Fits:
    Guider 2
    Fits:
    Guider 2S
    Fits:
    Finder
    Fits:
    Dreamer
    Fits:
    Dreamer NX
    Size:
    M4
    Length:
    4mm
    $0.79
  • Volcano Brass Nozzle

    Volcano Compatible - Brass Nozzle - 0.40mm

    PB3D Parts™

    $7.99
    Volcano Compatible Nozzle Size: 0.40mm For 1.75mm filament only For use with the Volcano block Size is easily identified by numerical digits on the side of the nozzle    
    SKU:
    PBX-NZL-VOLC-040
    Size:
    0.40mm
    Type:
    Volcano
    $7.99
  • Prusa Mini Heat brake upgrade

    Heat Break for Prusa Mini - Titanium

    PB3D Parts™

    $19.95
    Titanium Heat-break for Prusa Mini Solves the heat-creep Titanium alloy heat-break for the Prusa Mini. 
    SKU:
    PBX-HB-TA-PMINI
    Fits:
    Prusa Mini
    $19.95
  • R2/C2 GT2 Pulley

    GT Pulley for R2/C2 | 2 Pack

    PB3D Parts™

    $4.99
    GT2 Pulley - 2 Pack Includes Set Screws Fits: 8mm Linear Rods Specs: 20 Tooth 7mm Wide (for 6mm belt) 8mm Bore  
    SKU:
    R2C2-PLY-8MM
    Fits:
    R2
    Fits:
    C2
    $4.99
  • GT Timing Belt Spring

    Belt Tensioner Spring - 6mm | 5 Pack

    PB3D Parts™

    $3.99
    Timing Belt Tensioner Spring Universal belt tensioner spring for 3D printer 6mm drive belts Fits: 6mm Timing GT Belts
    SKU:
    PBX-SPRNG-BLT-6MM
    Fits:
    6MM
    $3.99
  • M4x5 Set Screw

    Set Screw for BLTouch | 12.9 Grade

    PB3D Parts™

    $0.79
    M4X5 Set Screw fits BLTouch 12.9 Grade Flat Point Uses 2mm Hex Key Driver Sold in units of one.    
    SKU:
    PBX-SETSCREW-M4X5FP
    Fits:
    BLTouch
    $0.79
  • 24 volt 40 watt heater

    Heater Cartridge 12v - 40w | 6x15mm

    PB3D Parts™

    $6.99
    Heater Cartridge Volts: 12 Watts: 40 Cartridge: 6x15mm Leads: 1000mm Silicone Wires Compatible Hotends: E3D V5/V6 RepRap
    SKU:
    PBX-HTR-1240-15MM
    Fits:
    E3D V6
    Fits:
    E3D V5
    Fits:
    RepRap
    Length:
    15mm
    Volts:
    12
    Watts:
    40
    $6.99
  • Heater Cartridge 12v - 40w | 6x20mm

    Heater Cartridge 12v - 40w | 6x20mm

    PB3D Parts™

    $6.99
    Heater Cartridge Volts: 12 Watts: 40 Cartridge: 6x20mm Leads: 1000mm Silicone Wires Compatible Heater Blocks: CR10 Mk8 Mk9 Volcano  
    SKU:
    PBX-HTR-1240-20MM
    Fits:
    CR10
    Fits:
    Mk8
    Fits:
    Mk9
    Fits:
    Volcano
    Volts:
    12
    Watts:
    40
    Length:
    20mm
    $6.99
  • 24 volt 40 watt heater

    Heater Cartridge 24v - 40w | 6x20mm

    PB3D Parts™

    $6.99
    Heater Cartridge Volts: 24 Watts: 40 Cartridge: 6x20mm Leads: 1000mm Silicone Wires Compatible Heater Blocks: CR10 Mk8 Mk9 Volcano  
    SKU:
    PBX-HTR-2440-20MM
    Fits:
    CR10
    Fits:
    Mk8
    Fits:
    Mk9
    Fits:
    Volcano
    Volts:
    24
    Watts:
    40
    Length:
    20mm
    $6.99
  • 24 volt 40 watt heater

    Heater Cartridge 24v - 40w | 6x15mm

    PB3D Parts™

    $6.99
    Heater Cartridge Volts: 24 Watts: 40 Cartridge: 6x15mm Leads: 1000mm Silicone Wires Compatible Hotends: E3D V5/V6 RepRap
    SKU:
    PBX-HTR-2440-15MM
    Fits:
    E3D V6
    Fits:
    E3D V5
    Fits:
    RepRap
    Length:
    15mm
    Volts:
    24
    Watts:
    40
    $6.99
  • Volcano Brass Nozzle

    Volcano Compatible - Brass Nozzle - 0.60mm

    PB3D Parts™

    $7.99
    Volcano Compatible Nozzle Size: 0.60mm For 1.75mm filament only For use with the Volcano block Size is easily identified by numerical digits on the side of the nozzle    
    SKU:
    PBX-NZL-VOLC-060
    Size:
    0.60mm
    Type:
    Volcano
    $7.99
  • Groove Mount Adapter with Clip for Mosquito Hotend

    Groove Mount Adapter for Mosquito Hotend

    PB3D Parts™

    $8.95
    Grove Mount Adapter for Mosquito Hotend This mount attaches directly to your Mosquito Hotend and will allow it to be mounted to a Bondtech QR, BMG or anywhere an E3D style hotend would mount...
    SKU:
    PBX-ADPT-MSQGRV-C
    Fits:
    Bondtech BMG
    Fits:
    Slice Mosquito
    Fits:
    Bondtech QR
    $8.95
  • 70 watt heater cartridge

    Heater Cartridge - 24v 70w

    PB3D Parts™

    $14.95
    Premium Heater Cartridge Volts: 24 Watts: 70 Amps: 2.92 Size: 6x20mm Leads: 1000mm Max Temperature: 320c  
    SKU:
    PBX-HTR-2470
    Fits:
    E3D Volcano
    $14.95
  • 70 watt heater cartridge

    Heater Cartridge 12v 70w

    PB3D Parts™

    $14.95
    Premium Heater Cartridge Volts: 12 Watts: 70 Amps: 5.83 Size: 6x20mm Leads: 1000mm Max Temperature: 320c  
    SKU:
    PBX-HTR-1270
    $14.95
  • PTFE Bowden Tube Cutter

    Bowden Tube PTFE Cutter

    PB3D Parts™

    $5.95
    Bowden Tube Cutter for PTFE Tubing This handy little tool easily makes super clean cuts in PTFE tubing. Buy premium Capricorn PTFE tubing here.    
    SKU:
    PBX-PTFE-CUT-B
    $5.95
  • Volcano Compatible Heater Block

    Heater Block - Volcano Compatible

    PB3D Parts™

    $12.95
    Heater Block for Sensor Cartridges This Volcano Compatible heater block allows you to use E3D thermistor cartridges, as well as a high temperature, high accuracy PT100 temperature sensors...
    SKU:
    PBX-HBLOK-VOLC
    Fits:
    E3D V6
    $12.95
  • Heater Block - Plated Copper - Volcano Compatible

    Heater Block - Plated Copper - Volcano Compatible

    PB3D Parts™

    $21.95
    Nickle Plated Volcano Compatible Copper Heater Block This Volcano Compatible heater block allows you to use E3D thermistor cartridges, as well as a high temperature, high accuracy PT100...
    SKU:
    PBX-HBLOK-VOLC-COP
    Fits:
    E3D V6
    $21.95
  • Bowden Clips Replacement Bowden Collet

    Bowden Collet with Clip - 4mm

    PB3D Parts™

    $1.39
    Bowden Collet with Clip Replacement Collet for our RepRap Heatsinks Suitable for 4mm OD Bowden tube Includes one push fit collet and one collet clip  
    SKU:
    PBX-COL-CLIP-4MM
    $1.39
  • Silicon Sock for Cr10

    Silicone Pro Sock for CR10S

    PB3D Parts™

    $3.49
    Silicon Pro Sock for CR10S These silicon socks will help keep plastic off your heater block and keep you hotend and nozzle at a more consistent temperature Fits: Creality CR-10 Creality...
    SKU:
    PBX-SILSOCKPRO-CR10S
    Fits:
    CR10S
    Fits:
    CR10
    $3.49
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.15mm

    PB3D Parts™

    $7.99
    RepRap Nozzle Size: 0.15mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend RepRap Hotend    
    SKU:
    PBX-NZL-RR-015
    Fits:
    E3D
    Fits:
    Prusa I3
    Fits:
    Prusa Mini
    Size:
    0.15mm
    $7.99
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.40mm

    PB3D Parts™

    $8.95
    Brass Nozzle for CR10S Pro Size: 0.40mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    SKU:
    PBX-NZL-CR10P-040
    Fits:
    CR-10S Pro
    $8.95
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.60mm

    PB3D Parts™

    $8.95
    Brass Nozzle for CR10S Pro Size: 0.60mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    SKU:
    PBX-NZL-CR10P-060
    Fits:
    CR-10S Pro
    $8.95
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.80mm

    PB3D Parts™

    $8.95
    Brass Nozzle for CR10S Pro Size: 0.80mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    SKU:
    PBX-NZL-CR10P-080
    Fits:
    CR-10S Pro
    $8.95
  • On Sale
    365mm Hard Chrome Linear Rod

    Linear Rod - 8mm x 365mm - Hard Chrome

    PB3D Parts™

    Now: $5.99
    Regular Price: $8.49
    Linear Rod Length: 365mm Diameter: 8mm G6 high precision HRC60 Hard Chrome Plated Gcr15 steel
    SKU:
    PBX-ROD-HC-08-365
    Length:
    365mm
    Diameter:
    8mm
    Now: $5.99
    Regular Price: $8.49
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.20mm

    PB3D Parts™

    $9.95
    Brass Nozzle for CR10S Pro Size: 0.20mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    SKU:
    PBX-NZL-CR10P-020
    Fits:
    CR-10S Pro
    $9.95
  • Copper Heatbreak

    Copper Bimetal Heat Break For RepRap V6 Hotends

    PB3D Parts™

    $24.95
    Bimetal Copper V6 Heat Break This bimetal heat break is comprised of copper and stainless steel. The thin stainless steel tube used as the break, reduces heat transfer to the cold end. While...
    SKU:
    PBX-HB-BIMET-V6
    Fits:
    E3D V6
    Fits:
    RepRaP Hotend
    $24.95
  • Anti Static Grounding Strap

    Anti Static Wrist Brand - Grounding Wire

    PB3D Parts™

    Regular Price: $3.95
    $2.95
    Anti Static ESD Grounding Bracelet Wear whenever working on the electronics of your 3D printer to reduce the risk of damage to sensitive components. Note: Always shut down and unplug...
    SKU:
    PBX-ESD-BRACELET
    Regular Price: $3.95
    $2.95
  • 4mm Bowden tube connector

    Push Fit Connector - PC4-01 | 4 Pack

    PB3D Parts™

    $4.99
    Push Fit Connector Contains 4 push fit connectors  PC4-01 for 4mm PTFE tube These connectors have a stop point, so the PTFE tube will not pass all the way through. 
    SKU:
    PBX-PFIT-PC4-01-4PK
    $4.99
  • K Type Thermocouple for 3D Printer

    Thermocouple - K Type - 1 meter

    PB3D Parts™

    $12.95
    K Type Thermocouple  Cartridge Size: 3*15mm Wire Length: 1000mm Temperature Range: 0-500c  
    SKU:
    PBX-THERM-K-1000
    $12.95
  • Stepper motor to XH2.54  Extension Cable

    Cable - Stepper Motor to XH2.54 - 4 pin | 2 meter

    PB3D Parts™

    $4.99
    Extension Cable, Stepper Motor to XH2.54 4 Pin Approximately 2 meter long Nema 17 stepper motor 6-pin connector to XH2.54 4-pin connector The default wiring for this extension cable...
    SKU:
    PBX-CBL-STPR-XH-2M
    $4.99
  • Stress Relief Fitting for R2 HDMI Cable

    Stress Relief Fitting for R2 HDMI Cable | STL file

    PB3D Parts™

    $0.00
    Stress Relief Fitting Please Note: This is the STL file only. HDMI cable not included. On some R2s the sharp angle of the HDMI cable can cause the cable to crease and then fail. Print and...
    SKU:
    R2-CBL-SR
    Fits:
    Robo R2
    $0.00
  • GT2 Pulley

    GT Pulley - 20T - 7mm Wide - 5mm Bore (for 6mm GT Belt)

    PB3D Parts™

    $3.49
    Precision Ground GT2 Stepper Motor Pulley These are recommended for use with Gates GT2/3 belts Includes Set Screw Fits: 5mm Motor Shaft Specs: 20 Tooth 7mm Wide (for 6mm belt) 5mm Bore
    SKU:
    PBX-PLY-GT050620T
    Fits:
    R1+
    Fits:
    R2
    Fits:
    C2
    Fits:
    5mm Shaft
    $3.49
  • 2 Meter BLTouch Extension Cable

    Cable for BLTouch - 1.5 Meter

    PB3D Parts™

    $7.49
    Universal BLTouch Cable - 1.5 Meter This is one long cable that plugs directly into the BLTouch and eliminates the additional joints created when using other BLTouch extension cables. Comes...
    SKU:
    PBX-BLT-EXT-1500
    Fits:
    BLTouch
    $7.49
  • Silicon Sock for Cr10

    Silicone Socks for MK7/MK8/MK9 | 3 Pack

    PB3D Parts™

    $8.95
    3 Pack of Silicon Socks for MK7/MK8/MK9 Heater Blocks These silicon socks will help keep plastic off your heater block and keep you hotend at a more consistent...
    SKU:
    PBX-SILSOCK-MK789-3PK
    $8.95
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.20mm

    PB3D Parts™

    $6.99
    RepRap Nozzle Size: 0.20mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-020
    Fits:
    E3D
    Fits:
    Prusa I3
    Fits:
    Prusa Mini
    Size:
    0.20mm
    $6.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.80mm

    PB3D Parts™

    $5.99
    RepRap Nozzle Size: 0.80mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-080
    Fits:
    E3D
    Fits:
    Prusa I3
    Fits:
    Prusa Mini
    Size:
    0.80mm
    $5.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.50mm

    PB3D Parts™

    $5.99
    RepRap Nozzle Size: 0.50mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-050
    Fits:
    E3D
    Fits:
    Prusa I3
    Fits:
    Prusa Mini
    Size:
    0.50mm
    $5.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.30mm

    PB3D Parts™

    $5.99
    RepRap Nozzle Size: 0.30mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-030
    Fits:
    E3D
    Fits:
    Prusa I3
    Fits:
    Prusa Mini
    Size:
    0.30mm
    $5.99
  • Performance Brass RepRap Nozzle

    RepRap Nozzle V6 Series - 0.60mm

    PB3D Parts™

    $5.99
    RepRap Nozzle Size: 0.60mm For 1.75mm diameter filament Fits: Prusa i3 MK2(S)/MK3(S) (with E3D v5 - v6 Hotend) Prusa Mini Hexagon Hotend E3D V6 Hotend    
    SKU:
    PBX-NZL-RR-060
    Fits:
    E3D
    Fits:
    Prusa I3
    Fits:
    Prusa Mini
    Size:
    0.60mm
    $5.99
  • Heavy Duty Push Fit Connector

    Heavy Duty All Metal Push-Fit Connector - 4mm

    PB3D Parts™

    $4.49
    Heavy Duty Metal Push-Fit Connector  All Metal For 4mm Tube Thread G1/8″  Note: If you are having trouble with the Bowden tube popping out, click here and...
    SKU:
    PBX-PFIT-12014
    Size:
    4mm
    $4.49
  • MK10 Brass Nozzle

    MK10 Brass Nozzle | 0.60mm

    PB3D Parts™

    $9.95
    MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.60mm Fites: Flashforge Guider 2 (not high tamp version) Flashforge Inventor Flashforge Inventor 2S FlashForge...
    SKU:
    PBX-NZL-MK10-060
    $9.95
  • MK10 Brass Nozzle

    MK10 Brass Nozzle | 0.80mm

    PB3D Parts™

    $9.95
    MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.80mm Fites: Flashforge Guider 2 (not high tamp version) Flashforge Inventor Flashforge Inventor 2S FlashForge...
    SKU:
    PBX-NZL-MK10-080
    $9.95
  • MK10 Brass Nozzle

    MK10 Brass Nozzle | 0.20mm

    PB3D Parts™

    $9.95
    MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.20mm Please note: The 0.20mm nozzles have no markings to indicate the size Fites: Flashforge Guider 2 (not high tamp...
    SKU:
    PBX-NZL-MK10-020
    $9.95
  • PINDA Probe V2

    PINDA Probe V2 for Prusa 3D Printers

    PB3D Parts™

    $19.95
    V2 P.I.N.D.A Probe for Prusa 3D Printers Fits: MK2.5 MK2.5S MK3 MK3S To test your current PINDA probe, follow this guide from the Prusa Knowledge Base.
    SKU:
    PBX-PINDA-V2
    $19.95
  • PT100 Thermocouple for 3D printer UM2

    PT100 Thermocouple - 1.5 Meter

    PB3D Parts™

    $14.95
    PT100 Thermocouple Max temp: 450c Type: Cartridge Cartridge Size: 3x15mm Cable Length: 1.5 Meter (approximate) Connector: KF2510 (2 pin)      
    SKU:
    PBX-THM-PT100-1500
    $14.95
  • XL4015 Buck Converter

    Buck Converter XL4015 - 5a (DC-DC)

    PB3D Parts™

    $2.99
    5 Amp DC-DC Buck Converter XL4015 Input voltage 4.0 ~ 38V Adjustable output voltage range 1.25V ~ 35V (Input voltage must be higher than the output voltage by 1.5V) Output current...
    SKU:
    PBX-XL4015
    $2.99
  • All Metal Heatbreak

    Heat Break Tube - All Metal 1.75mm - RepRap V6 Type

    PB3D Parts™

    $9.95
    All Metal Heat Break Tube 1.75mm filament M7 threaded body Great for print high temperature filaments - ABS, PETG, ASA, PEI, PEEK, Etc. For lower temperature filaments use a PTFE lined...
    SKU:
    PBX-HB-V6AM-175
    Fits:
    E3D Hotend
    Fits:
    RepRaP Hotend
    Fits:
    FUNMAT HT
    $9.95
  • E3D Nozzle Wrench

    Nozzle Wrench for RepRap Nozzle

    PB3D Parts™

    $1.99
    Nozzle Wrench Handy little wrench for removing nozzles. 7mm Fits: E3D Nozzles RepRap Nozzles  
    SKU:
    PBX-NZL-WRENCH
    $1.99
  • 4 pack 3.5 inch clamp

    Clamp for R1 Bed Magnet Installation - 4 Pack

    PB3D Parts™

    $6.95
    Robo R1/+ Bed Installation Clamps Small clamps to assist with the installation of bed magnets on the R1+ bed. Set of 4 clamps. These are 4 inch clamps with an opening of about 2 inches
    SKU:
    PBX-CLAMP-35-4PK
    $6.95