Fan Shroud for Robo R2 and C2
Includes magnets for mounting metal Robo plate on front.
Does not include printed fan ducts that attach to the bottom. You can download the stl files for those...
Raspberry Pi Power Cable
This is the cable that runs from the mainboard to the Raspberry Pi. It is a little shorter then the stock R2 cable, but will reach with slightly less excess wire...
Raspberry Pi Power Cable
This is the cable that runs from the mainboard to the Raspberry Pi. It is a little shorter then the stock R2 cable, but will reach with slightly less excess wire...
R2/C2 Bed Sensor
Includes: IR sensor (1 pcs)
If you have a failed IR sensor you can replace or disable it. Disabling the IR sensor is discussed on the Robo 3D user forum here: Post 12
Robo R2 BuildTak Print Surface
Original Buildtak sheet. Sold in units of 1.
If you are printing with PETG, we recommend using a PEI print surface instead.
Please Note: Care should be taken to...