Tools & Lubrication

Tools & Lubrication

Here is a selection of 3D printing tools that we find handy around the shop.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Adjustable Wire Strippers Adjustable Wire Strippers Holding

    Adjustable Wire Strippers/Cutters

    Other

    $6.95
    Adjustable Wire Stripper I use these adjustable wire strippers in our shop when adding electronics to my 3D printed items (like these battery adapters). I like to have a few around, each set to a different gauge of wire. That...
    $6.95
    Qty in Cart: 0
    Quantity:
    Price:
    $6.95
    Subtotal:
  • ZYP™ Boron Nitride Thermal Paste Slice Engineering Boron Nitride Thermal Paste

    Boron Nitride Thermal Paste | Slice Engineering

    Slice Engineering

    $9.95
    ZYP™ Boron Nitride Thermal Paste from Slice Engineering One 5 cc syringe  Applicator included Thermal paste improves heat conduction and heat distribution Boosts heat dissipation from the hot section of the heater...
    $9.95
    Qty in Cart: 0
    Quantity:
    Price:
    $9.95
    Subtotal:
  • PTFE Tube Cutter Bowden Tube Cutter

    Bowden Tube Cutter for PTFE Tubing | PBX

    PBxParts

    $2.99
    Bowden Tube Cutter for PTFE Tubing This handy little tool easily makes super clean cuts in PTFE tubing. Buy premium Capricorn PTFE tubing here.  
    $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    $2.99
    Subtotal:
  • 3.5 inch Clamp 4 pack 3.5 inch clamp

    Clamp for R1 Bed Magnet Installation - 4 Pack | PBX

    PBxParts

    $6.95
    Robo R1/+ Bed Installation Clamps Small clamps to assist with the installation of bed magnets on the R1+ bed. Set of 4 clamps.
    $6.95
    Qty in Cart: 0
    Quantity:
    Price:
    $6.95
    Subtotal:
  • Nozzle cleaning brush Brass nozzle cleaning brush

    Cleaning Brush - Brass

    PBxParts

    $3.99
    Brass Bristle Brush Great for nozzle cleaning
    $3.99
    Qty in Cart: 0
    Quantity:
    Price:
    $3.99
    Subtotal:
  • Otis Brush

    Cleaning Brush - Nylon

    Other

    $1.99
    Nylon Cleaning Brush Nylon bristle brush. Handy for cleaning out extruder drive gears.  
    $1.99
    Qty in Cart: 0
    Quantity:
    Price:
    $1.99
    Subtotal:
  • Craft Knife - Ceramic Blade | Slice

    Craft Knife - Ceramic Blade | Slice

    Slice

    $14.95
    Ceramic Blade Craft Knife Ceramic blade stays sharp longer Ambidextrous Anti-slip grip
    $14.95
    Qty in Cart: 0
    Quantity:
    Price:
    $14.95
    Subtotal:
  • Digital Calipers Digital Calipers

    Digital Calipers

    PBxParts

    $19.95
    Digital Calipers Size: 150mm Displays: MM, Decimal and Fractions
    $19.95
    Qty in Cart: 0
    Quantity:
    Price:
    $19.95
    Subtotal:
  • NOGA replacement blade Deburr tool replacement blade

    Edge Cleanup Tool - Fine Tip Blade

    PBxParts

    $3.99
    Replacement Blade - Fine This blade has a smaller tip then the blade that comes standard on the brim and edge cleanup tool, allowing you to clean smaller areas, if needed. Note: This is the blade only, handle not included. Buy the full tool here.
    $3.99
    Qty in Cart: 0
    Quantity:
    Price:
    $3.99
    Subtotal:
  • 3D print edge cleaning tool 3D print hole cleaning tool

    Edge Cleanup Tool for 3D Prints

    PBxParts

    $12.95
    3D Print Cleanup Tool for Edges This tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...
    $12.95
    Qty in Cart: 0
    Quantity:
    Price:
    $12.95
    Subtotal:
  • Epoxy Double/Bubble | HARDMAN

    Epoxy Double/Bubble | HARDMAN

    HARDMAN

    $3.99
    DOUBL/BUBBLE Epoxy - Very High Peel Strength by HARDMAN This is the epoxy we use for attaching the magnets to the R1/+ glass print bed.  It is flexible and durable which makes it good for a lot of other uses as well. Comes in a single use...
    $3.99
    Qty in Cart: 0
    Quantity:
    Price:
    $3.99
    Subtotal:
  • Flush cut trimmers Flush cut wire cutters

    Flush Cut Trimmers for 3D Print Clean Up Post-Processing

    Other

    $4.99
    Flush Cut Trimmers for 3D Print Clean Up We use these flush cut trimmers in our shop to cut filament and clean up 3D prints after printing. They work really well for removing boogers and other imperfections.
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    $4.99
    Subtotal:
  • Nano Polymer Adhesive Peek Print Bed Glue

    Nano Polymer Adhesive - Print Bed Glue | Vision Miner

    Vision Miner

    $49.00
    NANO POLYMER ADHESIVE Designed for PEEK, Ultem™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament - Nylon, ABS, PLA, PETG, PEI, PSU. NO MESS like Glue Stick or Hair Spray - Better...
    $49.00
    Qty in Cart: 0
    Quantity:
    Price:
    $49.00
    Subtotal:
  • Nozzle Cleaner - Set of 4

    Nozzle Cleaner - Set of 4

    PBxParts

    $4.99
    Nozzle Cleaner - Set of 4 One of each size:0.3mm0.4mm0.5mm0.6mm
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    $4.99
    Subtotal:
  • Nozzle Cleaner - Set of 5

    PBxParts

    $5.99
    Nozzle Cleaner - Set of 5 One of each size:0.2mm0.3mm0.4mm0.5mm0.6mm
    $5.99
    Qty in Cart: 0
    Quantity:
    Price:
    $5.99
    Subtotal:
  • 3D Printer Nozzle Torque Wrench from Slice Engineering

    Nozzle Torque Wrench | Slice Engineering

    Slice Engineering

    $24.99
    1.5nm Nozzle Torque Wrench from Slice Engineering Designed for Slice engineering Vanadium Nozzles™ Achieve a proper seal without over tightening This 1/4 inch nozzle torque wrench is just a tad larger than a 6mm nozzle, which gives you a...
    $24.99
    Qty in Cart: 0
    Quantity:
    Price:
    $24.99
    Subtotal:
  • E3D Nozzle Wrench RepRap Nozzle Wrench

    Nozzle Wrench | PBX

    PBxParts

    $1.99
    Nozzle Wrench Handy little wrench for removing nozzles. 7mm Fits: E3D Nozzles RepRap Nozzles  
    $1.99
    Qty in Cart: 0
    Quantity:
    Price:
    $1.99
    Subtotal:
  • Polysher by Polymaker Polysher- smooth your 3D prints

    Polymaker Polysher

    Polymaker

    $299.00
    Please note: orders of the Polysher take an additional 2-3 days processing time and ship by UPS/FedEx ground only. Polysher by Polymaker Designed for use only with PolySmooth filament (not included). Polysher...
    $299.00
    Qty in Cart: 0
    Quantity:
    Price:
    $299.00
    Subtotal:
  • Tech-Bond 3D Print Bonding System

    Polymer Bonding Kit | Tech-Bond

    Tech-Bond

    $30.95
    Tech-Bond Basic Poly Kit This is the best bonding system we have found for bonding 3D printed parts. It bonds everything, even Nylon and PTFE. We keep this around our shop and use it whenever we need to glue printed parts together. Kit...
    $30.95
    Qty in Cart: 0
    Quantity:
    Price:
    $30.95
    Subtotal:
  • Synthetic Grease with PTFE for Bearings and Gears | Super Lube™

    Synthetic Grease with PTFE for Bearings and Gears | Super Lube™

    Super Lube

    $4.99
    Synthetic Grease with SYNCOLON™ (PTFE) This is a great grease to use on your Bondtech extruder, drive gears or anywhere else you need a high quality grease. Convenient 1/2 oz tube Temperature range of -45°F to 450°F (-43°C to...
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    $4.99
    Subtotal:
  • Synthetic Oil with PTFE

    Synthetic Oil with PTFE - 4oz | Super Lube™

    Super Lube

    $6.95
    Synthetic Oil with SYNCOLON™ (PTFE) This is a great oil to use on your linear rails or anywhere else you need good lubrication 4 oz bottle SAE Grade 85W Temperature range of -45°F to 450°F (-43°C to...
    $6.95
    Qty in Cart: 0
    Quantity:
    Price:
    $6.95
    Subtotal:
  • SuperLube Precision Oiler SuperLube Precision fits linear bearing lube hole

    Synthetic Oil with PTFE, 7ml Precision Oiler | Super Lube™

    Super Lube

    $4.99
    7ml of Synthetic Oil with SYNCOLON™ (PTFE) in a Handy Precision Oiler This is an industrial quality PTFE oil. Great for keeping the linear rails of your 3D Printer sliding smooth and quiet. Rated to withstand temperatures of up to 450f, this oil...
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    $4.99
    Subtotal:
  • 3D Printer Tube Grease Robo3D

    Tube Grease | Robo 3D

    Robo 3D

    Regular Price: $8.99
    $4.99
    Tube Grease for lubing the rails, rods and ball screws of your 3D printer. This is the same grease that comes stock with the Robo 3D printers.
    Regular Price: $8.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    Regular Price: $8.99
    $4.99
    Subtotal:
  • Total: items /

Adding your products to cart