Tools & Shop Supplies

    Flush Cut Trimmers Includes: Trimmers (1 pc)

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)

Heat-Set Insert Soldering Iron Tips These soldering iron tips are used for installing heat-set inserts into plastic objects.  Tip Type: T18 compatible Fits: PBX45S soldering IronHAKKO FX888D soldering ironOther soldering Irons that...

L-Shape Hex Wrench Size: 1.5mmLength: 78.5mmBrand: BONDHUS Made in the USA

  Hex Wrench (L Wrench) Includes: Hex wrench (1 pcs) Size: 3.0mm

  Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mm 

PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm

Heat Resistant Kapton Tape Use this tape to secure the insulation to your Flashforge heater block. Includes: Tape roll (1 pcs) Width: 5mm Length: 33 meters

 Important Shipping Notes - Ships to the US and Canada only- Cannot be shipped to PO boxes - Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada- Only ships UPS/FedEx ground, no...

Henkel 60905 LOCTITE® 609™ Press Fit Retaining Compound - .5 mL (.02 oz) Capsule This is what MakerGear recommends for installing the pinion gear onto the extruder motor shaft of the M2/M3 3D Printers MSDS

Prusa Lubricant Applicator Set Includes: Lubricant 5g (1 pcs)Applicator (1 pcs) After a certain period of time (see the 3D Printing Handbook), your printer should be cleaned and greased in order to work properly. More information including...

Magigoo Original 3D Printing Adhesive Magigoo ensures strong adhesion to a hot print surface, but easy release when the print surface cools down.Non-toxic and easy to clean with water. Size: 10ml  Includes: Magigoo sample size (1 bottle) Works...

  Spool Holder Includes: Spool holder (1 pcs) Color: Black Holds up to 5gk spoolsBearings for smooth feedingNone slip feetAssembly required

Brass Bristle Brush Great for nozzle cleaning

Stainless Steel Bristle Brush Great for cleaning hardened steel nozzles

Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...

PB Select™ Preset Torque Wrench - 3NM E3D recommends tightening their V6 and Volcano nozzles to 2.5-3nm. Includes:Preset 3nm torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D Etc) 5.5 mm5.0 mm4.5 mm (Sidewinder X3 Pro/Max) Fits:E3D V6 Nozzles7mm RepRap NozzlesArtillery Sidewinder X3 Pro/MaxBondtech...

Nut Driver Size: 10 mm Includes: Nut driver (1 pcs)

Nut Driver Size: 6 mm Includes: Nut driver (1 pcs)