Tools & Supplies

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

M4X3 Set Screw 12.9 Grade Sold in a 4 pack    

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

M4X5 Set Screw 12.9 Grade Flat Point Uses 2mm Hex Key Driver Sold in units of one.    

3D Print Removal Tool - Small Scraper Small black scraper for removing small prints and purge lines. Includes: Scraper (1 pcs) Length: 136mmBlade width: 32mm Please Note: This is the latest version from Artillery with a very thin...

Small Spool Roller for Artillery Sidewinder X2 This file was designed by James I. Click here to read more about the spool holder and to download the STL file.   Licensed under a Creative Commons Attribution-ShareAlike 4.0 International...

Socket Adapter for Slice Engineering Torque Wrench This adapter allows for the use of 1/4 inch sockets with the Slice Engineering Nozzle Torque Wrench. With this adapter you can use the torque wrench with different size nozzles by using...

L Shaped Socket Wrench Size: 10 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 6 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 8 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 9 mm Includes: Wrench (1 pcs)

DC-DC Step Down Buck Converter LM2596 Input: 4.5-40VDCOutput: 1.5-35VDCLoad current: 3A MaxNote: Input Must Be 1.5V Higher than Output

Stress Relief Fitting Please Note: This is the STL file only. HDMI cable not included. On some R2s the sharp angle of the HDMI cable can cause the cable to crease and then fail. Print and install this stress relief fitting according to the...

Super Lube® 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality grease...

Super Lube® 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease. Includes: 1...

Synthetic Oil with SYNCOLON™ (PTFE) This is a great oil to use on your linear rails or anywhere else you need good lubrication 4 oz bottle SAE Grade 85W Temperature range of -45°F to 450°F (-43°C to...

7ml of Synthetic Oil with SYNCOLON™ (PTFE) in a Handy Precision Oiler This is an industrial quality PTFE oil. Great for keeping the linear rails of your 3D printer sliding smooth and quiet. Rated to withstand temperatures of up to 450f, this oil...

4 Position, 90 Degree Right Angle, Terminal Block Header Includes: Header (1 pcs) Amps: 12Pitch: 5.08mm