Stress Relief Fitting for R2 HDMI Cable | STL file

SKU:
R2-CBL-SR
  • Stress Relief Fitting for R2 HDMI Cable
  • Stress Relief Fitting for R2 HDMI Cable - back side
$0.00

Description

Stress Relief Fitting

Please Note: This is the STL file only. HDMI cable not included.

On some R2s the sharp angle of the HDMI cable can cause the cable to crease and then fail. Print and install this stress relief fitting according to the pictures below to help increase the life of your HDMI cable.

Note: this is only needed if your printer uses an HDMI cable with an L-shaped plug. If your printer uses an HDMI cable with a straight plug and a U fitting, this fitting is not needed.

Instructions for removing the front panel and accessing the LCD screen can be found here: https://support-site.readthedocs.io/en/dev/R2/assembly/index.html#front-panel-removal

 

r2-hdmi-sr-002.jpg

r2-hdmi-sr-003.jpg

r2-hdmi-sr-004.jpg

Stress Relief Fitting Designed by Jonah

 

 

 

View AllClose

Additional Information

Fits:
Robo R2
View AllClose