XL

M4 Leaf Spring T-Slot Nut Plated roll-in t-slot nut with leaf spring. Includes: M4 T-Slot Nut (1 pcs) Size:(Measured by hand - sizes are approximate)Length: 18.5mmWidth: 12mmHeight: 6.5mm Fits: Prusa XL (spool holder)

Prusa FDM Modular Bed for XL Replacement Modular Bed. for the XL.  Includes: Modular Bed (1 pcs) Fits: XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Needle File Set  Files with different profiles: flat, square, triangular, lenticular, semicircular, roundmade of GCr15 bearing steel Includes: Files (6 pcs)

Nextruder Hotend Assembly with High Flow CHT Brass Nozzle Fully assembled hotend for the Nextruder. This hotend comes with the High Flow CHT nozzle Nozzle Size: Select above  Includes:Prusa Brass High Flow CHT Nozzle* (1pcs)Heaterblock...

Prusa Nextruder Heater Block Includes: Heater block (1 pcs)M3x4 grub screw (3 pcs) Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Nextruder Hotend Assembly with Brass Nozzle Fully assembled hotend for the Nextruder Nozzle Size: Select Above Includes:Nozzle of Selected Size (1pcs)Heaterblock (1pcs)Heater 40 W - 120 mm (1pcs)Thermistor NTC 100k - 115 mm...

Prusa Nextruder Silicone Sock (3 Pack) The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

Nextruder V6 Nozzle Adapter This adapter makes your Nextruder compatible with any V6 nozzle. You can use it with the Original Prusa XL, MK3.9, MK4 and CORE One Includes: Adapter (1 pcs) Fits:CORE OneMK3.9MK3.9SMK4MK4SXL Note: Nozzle not...

Nozzle Cleaning Needle 0.3mm Diameter Includes: needle (5 pcs)  

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

PB Select™ Nylon Spacer for Prusa Nextruder This is the spacer the seats into the Nextruder PG cover on the below listed printers.  Includes: Spacer (1 pcs) Size: 13x24x2,5mmFits: Prusa MK3.9Prusa MK4Prusa XL

PB Select™ Nylon Washer 3x7x1mm Replacement for the washers on the Core XY subassembly. Includes: Washer (50 pcs) Size: 3x7x1mm Fits: Prusa XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

NYLON 3x555 mm Includes: NYLON 3x555 mm (1 pc) Fits: Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

O-Ring Set Includes: O-ring (100 pcs) Fits: XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

9mm SAC-1 Stainless-Steel Graphics Knife with 30-Degree Precision Blade High-quality precisely made stainless steel precision knife with an acute 30° snap angle for enhanced cutting control. Each blade offers seven cutting segments per blade...

Replacement Blades for the Olfa SAC-1 Precision Knife  High-quality precisely made stainless steel 9 mm blades with an acute 30° snap angle for enhanced cutting control. Each blade offers seven cutting segments per blade...

Original Prusa CHT Brass Nozzle These are the same nozzles that come stock on the new Prusa MK4S printers. Includes: CHT Brass Nozzle (1 pcs) Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please...

Nextruder Nozzle (choose size above) All-metal high-precision nozzle for the Nextruder combines both nozzle and heat break into one unit for leak free printing. Includes: Nozzle (1 pcs) Fits:CORE OneMK3.9MK3.9SMK4MK4SXL For the new generation of...