XL

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Basics of 3D Printing with Josef Prusa   English Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d...

  Basics of 3D Printing with Josef Prusa   Spanish Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d.com...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

Clear Gearbox Cover for Prusa Nextruder This version has no text on the front. Includes: Acrylic Cover (1 pcs) Fits: Prusa MK4Prusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Dock Pin for Prusa XL Includes: Pin (1 pcs) Fits: Prusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Prusa PG-Assembly Planetary drive gear assembly for Nextruder Includes: Gear assembly (1 pcs) Fits:MMK3.9MK4XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Prusa Hall Filament Sensor Also known as the LoveBoard Filament Sensor Includes: Filament sensor (1 pcs) Fits: MK4XL  To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

Prusa XL Heater Cartridge (Hotend Heater) Includes: Heater (1 pcs)M3x4 grub screw (2 pcs)     Specifications:Voltage: 24VWattage: 40WLead Length: 120 mm   Fits: Prusa XL To replace this part, please consult the...

PB Select™ Heater Cartridge (Hotend Heater) for Prusa XL and MK4 Includes:Heater (1 pcs)Set screw with T6 Torx Head (2 pcs) Specifications:Voltage: 24VWattage: 40WLength: 120mm Fits: Prusa MK4Prusa XL Note: Set screw color may not match...

PB Select™ Heater Block (Hot Block) for MK4/XL Includes:Heater block (1 pcs)M3x4 grub screw with T6 torx head (3 pcs)  Fits: Prusa MK4Prusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Nextruder Heater Block - Plated Copper - for Prusa MK4/XL This Nextruder heater block is made from nickel-plated copper. It's fully compatible with the original hotend. Includes: Copper heater block (1 pc)M3x4 grub screw with T6 torx...

Prusa Hotend Fan This is the fan that cools the heatsink. Includes: Fan (1 pcs) Fits: MK4XL  To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

Prusa Nextruder Hotend Heatsink Includes: Hotend Heatsink (1 pcs) Fits: MK4XL  To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

M3 Leaf Spring T-Slot Nut (3030) Plated roll-in t-slot nut with leaf spring. Includes: M3 T-Slot nut with leaf spring (5 pcs) Size:(Measured by hand - sizes are approximate)Length: 19.5mmWidth: 12mmHeight: 6.5mm Fits: 3030 extrusion

M4 Leaf Spring T-Slot Nut Plated roll-in t-slot nut with leaf spring. Includes: M4 T-Slot Nut (1 pcs) Size:(Measured by hand - sizes are approximate)Length: 18.5mmWidth: 12mmHeight: 6.5mm Fits: Prusa XL (spool holder)

Multi-Tool Accessories for Prusa XL Includes: Calibration Pin (1 pc)Calibration-Pin-Key (1 pc)Cable-clip-stopper (2pcs)Silicone band (2pcs) Fits: XL Multi Tool To replace this part, please consult the Prusa Assembly Manuals. Make sure...

Prusa Nextruder Heater Block Includes: Heater block (1 pcs)M3x4 grub screw (3 pcs) Fits:MK4XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

Nextruder Hotend Assembly with Brass 0.40mm Nozzle Fully assembled hotend for the Nextruder Nozzle Size: 0.40mm  Includes:Brass Nozzle (1pcs)Heaterblock (1pcs)Heater 40 W - 120 mm (1pcs)Thermistor NTC 100k - 115 mm (1pcs) Fits:MK4XL To...

Nextruder Nozzle (choose size above) All-metal high-precision nozzle for the Nextruder combines both nozzle and heatbreak. Includes: Nozzle (1 pcs) Fits:MK4XL For the new generation of printers, Prusa is using special nozzles with an all-metal...

E3D Prusa Nextruder Nozzle Orifice Size:  Choose size above Type: BrassFilament Size: 1.75mm Fits:Prusa MK4Prusa XL

E3D Obxidian Nozzle for Prusa Nextruder (choose size above) Made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing...

We recommend the E3D Obxidian Nozzle. Original Prusa Nextruder Obxidian Nozzle Made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly...

Prusa Nextruder Silicone Sock (3 Pack) The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

E3D Nextruder V6 Nozzle Adapter This adapter makes your Nextruder compatible with any V6 nozzle. You can use it with the Original Prusa XL and MK4 Includes: Adapter (1 pcs) Fits:MK4XL Note: Nozzle not included - V6...

Nozzle Docking Seal Band Set for Prusa XL Includes: Seal band (10 pcs) Fits: Prusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Prusa Print Cooling Fan This is the blower fan that cools the part being printed. Includes: Fan (1 pcs) Fits: MK4XL  To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

Prusa PSU - 24 Volts This is the replacement power supply unit ONLY. It does NOT come with any cables. Buy the MK3 PSU kit here.  Includes: Power supply unit (1 pcs) Specifications:Voltage: 24VDCWattage: 240WCurrent (MAX): 10AFuse:...

Prusa MK3 Power Supply Assembly Replacement Power supply unit 24V 240W (assembly). It is ONLY compatible with MK3/S/+. The PSU itself is also available separately, without any cables or fasteners. Includes:Power supply unit 24V...

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK4Prusa XL Note: These are hex head set screws, not torx head (torx head is what comes standard on the MK4 and...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK4Prusa XL

PB Select™ Silicone Sock Includes: Silicone sock (2 pcs) Color: BlackMax temperature: 280°c Fits:Prusa MK4Prusa XL

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder Hotend not included This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Spare Parts Bundle (Prusa XL Multi Tool) A convenient set of spare parts and extra fasteners for maintenance and easy repairs of the Original Prusa XL (Dual-Head or Five-Head) 3D printer. Includes:2x assembled hotend with 0,4mm nozzle...

Spare Parts Bundle (Prusa XL Single Tool) A convenient set of spare parts and extra fasteners for maintenance and easy repairs of the Original Prusa XL Single-toolhead 3D printer. Includes:Assembled hotend with 0,4mm nozzle (hotend block,...

Prusa Spool Holder Includes:Spool holder slider (1 pc)Spool holder mount (1 pc)M4x12 Screw (1 pc)M4nEs Nut (1 pc)   Fits: Prusa XL

PA-Nylon Powder-coated Spring Steel Sheet for Original Prusa XL This print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type materials have...

Double-sided Satin PEI Powder-coated Spring Steel Sheet for Orginal Prusa XL Prusa's satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of...

Double-sided Smooth PEI Powder-coated Spring Steel Sheet for Orginal Prusa XL This is the replacement spring steel sheet with smooth double-sided PEI for the Original Prusa XL magnetic heatbed. Includes:Spring Steel Sheet (1...

Double-sided Textured PEI Powder-coated Spring Steel Sheet for Original Prusa XL Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating...

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Prusa Nextruder Hotend Thermistor  These are the 115mm version that fit both the MK4 and XL. Includes:Thermistor NTC 100k - 115 mm (1 pc)Grub screw M3x4 (1 pc) Fits: Prusa MK4Prusa XL To replace this part, please consult the...

Hotend Thermistor for Prusa XL  Includes: Thermistor NTC 100k (1 pc) Fits: Prusa XL Note: Set screw (grub screw) not included. Purchase M3x4 set screws here. To replace this part, please consult the...