MINI/+

CopperBlock™ Hot Block for Prusa MINI Nickel composite coated copper hot block for increased thermal conductivity.  Includes:Copper heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+ Note: After...

Slice Engineering Copperhead Heat Break for Prusa MINI/MINI+ The Copperhead Prusa MINI heat break is bimetallic, made of a copper outer body and an interior steel needle, which gives this heat break better cooling performance, allowing for a...

E3D Revo™ for Prusa MINI Edition Revo™ Prusa MINI edition is a drop-in replacement, giving you all the benefits of E3D’s Rapid Change Revo ecosystem in an easy-to-upgrade package. The E3D Revo kits come in two separate parts. A...

Extruder Drive Gear (Motor Pinion) for Prusa MINI OEM Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI and MINI+ extruder motor. This drive gear sits directly on the extruder motor shaft. Includes:Extruder Drive Gear (Motor...

Prusa MINI Extruder Driven Gear (Filament Spur) Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI and Mini+. This is the driven/idler gear pushing the filament inside the extruder assembly. Includes: Extruder Driven Gear...

PB Select™ Idler Springs for Prusa Extruder Latch & MMU2S/3 Includes: Idler spring (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MiniMini+MMU2SMMU3 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Prusa MINI Hotend Heatbreak This is an OEM Prusa MINI/+ hotend heat break. Includes:Hotend heat break MINI/+ (1 pcs)Thermal paste (0.5g) (1 pcs) Fits:MINIMINI+ Note: it is ONLY compatible with the Original Prusa MINI and MINI+. To...

Bondtech Stainless Steel Heat Break Kit for Prusa MINI and MINI+ Stainless Steel heat break for the Prusa Mini. Solves the heat-creep issues revealed during the extensive testing Bondtech performed on the Prusa Mini. The adjusted length of the...

Prusa Prusa MINI Heater Block This is an OEM Prusa MINI heater block. Includes:Heater block (1 pcs)Screws: M3x4 (1 pcs), M3x10r (1 pcs)Thermal paste (0.5g) (1 pcs) - Important! The thermal paste should not be applied to the hot side of...

PB Select™ Heater Block for Prusa MINI Includes:Aluminum heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+  Note: After changing hotend parts, a PID tune is recommended. 

Prusa MINI Hotend Heater Cartridge This is a replacement hotend heater cartridge (E3D 24V 40W). Includes: Heater cartridge - E3D 24V 40W (1 pcs) Specifications:Voltage: 24VWattage: 40WLength: 820 mm Fits:MINIMINI+ Note: The Molex...

PB Select™ Heater Cartridge for Prusa MINI Consistent heating through the cartridge for better heat distribution to the heater block Includes: Heater cartridge (1 pcs) Specifications:Volts: 24 VDCWatts: 40Leads: 820mm silicone...

Prusa MINI Heatsink This is a replacement heatsink for the MINI and MINI+. It is ONLY compatible with the Original Prusa MINI and MINI+. Note  Disassembled from new Prusa Hotend Assemblies and may contain residual traces of thermal...

Prusa MINI Heatsink This is a replacement heatsink for the MINI and MINI+. It is ONLY compatible with the Original Prusa MINI and MINI+. Includes:Hotend heatsink MINI (1 pcs)Threaded PTFE connection (1 pcs)Screws: M3x4 (3 pcs)Thermal paste (0...

Prusa MINI Hotend Assembly Replacement hotend for the Original Prusa MINI, MINI+. All listed components are already assembled together. Includes:Nozzle (Diameter: 0.4 mm) (1 pcs)Hotend heater block (1 pcs)Hotend heat break (1...

Bondtech IFS Extruder for Prusa MINI/+ (IDGA) Latest version with white plastic main gear and integrated drive gear for lower run-out (IDGA) Bondtech extruder upgrade for the Prusa MINI/+. This version allows you to install the Prusa filament...

PB select™ Ball & Magnets for Prusa Filament Runout Sensor Includes:19x6x2mm magnet (1 pcs)10x6x2mm magnet (2 pcs)7mm steel ball (1 pcs)

Prusa Mini Copperhead Hotend Upgrade Kit from Slice Engineering This all-in-one, plug-and-play upgrade takes your 3D printing to the next level by eliminating heat creep, preventing clogs, and speeding up 3D print times. Featuring the revolutionary...

Prusa MINI PTFE Fitting PTFE Fitting for PTFE tube extruder and heatsink connections Includes: PTFE Fitting (1 pcs) Fits:MINIMINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

PTFE Fittings Set for Prusa Mini Use this set to simplify the install, use and maintenance of Prusa Mini’s bowden tube.Instead of using 3 PTFE tube sections, use one only.Includes push-fit collets for ease of use and effective hold of the...