CR-10 Max

Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm

PB Select™ Brass Nozzle for CR10S Pro/Max Includes: Nozzle (1 pcs) Size:  0.20mm  Fits:CR-10S PROCR-10S Pro V2CR-10 Max  IMPORTANT This nozzle has a .75mm thread pitch and only fits the original...

PB Select™ Brass Nozzle for CR10S Pro/Max Includes: Nozzle (1 pcs) Size:  0.80mm  Fits:CR-10S PROCR-10S Pro V2CR-10 Max  IMPORTANT This nozzle has a .75mm thread pitch and only fits the original...

BLTouch Cable SM-XH 5P Cable for the BLTouch bed sensor. Note: This cable is a 4 wire cable for printers that have a 5 pin connector for connecting the sensor, please make sure your printer has a 5 pin connector and only needs 4 wires before...

  Original CR-10s Pro/Max Nozzle with M6x.75mm Threads - 0.40mm  The Micro Swiss plated wear resistant nozzle starts as a precision machined brass nozzle and then has the Micro Swiss TwinClad XT coating applied. The result is a...

  Micro Swiss Lightweight Direct Drive Extruder with All Metal Hotend Scroll to the bottom of this page for setup instructions.   Important Note There has been an extruder stepper motor update on Creality machines. Before...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

  Extension Cable for Direct Drive Extruder Spare Extension Cable for Micro Swiss Direct Drive kit for CR-10 & Ender printers.  Length: 67cm

  Hardware Kit for Direct Drive Extruder Spare hardware kit for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Includes:Beveled PTFE liner (1 pcs)M3 x .5 x 6mm Screws (3 pcs)M5 x .8 x 20mm Nylon Patch Screw (2 pcs)M5 x .8 x...

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

  Main Body for Micro Swiss Direct Drive Extruder configured for ExoSlide System Fits: Printers with ExoSlide System Includes:1x Main Extruder body2x M4 x .7 x 16mm ExoSlide mounting screws CNC Machined and Assembled in USA

Main Body for Micro Swiss Direct Drive Extruder on Linear Rail System Fits:Printers with MGN12 Linear Rail with MGN12H Carriage BlockOnly for printers with bottom belt mounting position Includes:1x Main Extruder body1x Linear Rail mounting...