CR20

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

Microswiss All Metal Hotend Kit for CR-10/Ender/Tornado/X5S/U20 Nozzle Size:  0.40mm Key benefits: No printer modification needed - this kit is a drop-in replacement for the CR-10. Faster heat dissipation - Microswiss has...

Nozzle for Crealty Printers D6 precision brass nozzle with M6x1 threads. For 1.75mm filament only. Size: 0.40mm Includes: Brass nozzle (1 pcs) Fits:  E3D MK8 All Creality printers that use M6x1 threads (MK8...

Nozzle for Creality Printers D6 precision brass nozzle with M6x1 threads. For 1.75mm filament only Size: 0.50mm Includes: Brass nozzle (1 pcs) Fits:  E3D MK8 All Creality 3D printers that use M6x1 threads (MK8...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

  Carborundum Glass Build Plate Includes: Glass build plate (1 pcs) Size: 235x235x4mm Notes:Clean with IPA (rubbing alcohol) or acetoneAllow bed to cool completely before removing print Fits:Ender-3Ender-3 V2Ender-3 KREnder-3...

PB Select™ Copper Heat Break Copper and stainless steel Includes: Heat Break (1 pcs) Fits:CR-7CR-8SCR-9SCR-10miniCR-10CR-10SCR-10 V2CR-10 V3CR-10 S4CR-10 S5CR-100CR-100BCR20CR20...

Microswiss Lightweight Direct Drive Extruder with All Metal Hotend Scroll to the bottom of this page for setup instructions.   Important Note There has been an extruder stepper motor update on Creality machines. Before...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

  Extension Cable for Direct Drive Extruder Spare Extension Cable for Micro Swiss Direct Drive kit for CR-10 & Ender printers.  Length: 67cm

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Hardware Kit for Direct Drive Extruder Spare hardware kit for Microswiss Direct Drive kit for CR-10 / Ender printers.  Includes:Beveled PTFE liner (1 pcs)M3 x .5 x 6mm Screws (3 pcs)M5 x .8 x 20mm Nylon Patch Screw (2 pcs)M5 x .8 x...

  Creality Stainless Steel Heat Break This is the standard heat break that allows for the PTFE tube to pass all the way through. Includes: Heat Break (1 pcs) Fits:CR-7CR-8SCR-9SCR-10miniCR-10CR-10SCR-10 V2CR-10 V3CR-10 S4CR-10...

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

Limit Switch (Endstop) Includes: Limit Switch (1 pcs)  Fits:Ender-2 ProEnder-3Ender-3 SEnder-3 MaxEnder-3 ProEnder-3 V2Ender-3 NeoEnder-3 Max NeoEnder-3 V2 NeoEnder-3 S1 Ender-3 S1 PlusEnder-3 S1 ProEnder-5Ender-5 S1Ender-5 PlusEnder-5...

  Main Body for Micro Swiss Direct Drive Extruder configured for ExoSlide System Fits: Printers with ExoSlide System Includes:1x Main Extruder body2x M4 x .7 x 16mm ExoSlide mounting screws CNC Machined and Assembled in USA

Motor Gear for Direct Drive Extruder Spare motor gear for Micro Swiss Direct Drive kit for CR-10 & Ender printers.  Precision CNC machined teeth Hardened tool steel Includes:Gear (1 pcs)Set screw (1 pcs)Hex wrench (1 pcs)

Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...

X Axis Idler Wheel High hardness, wear resistant POM is CNC precision machined with no burrs or bubbles for a smooth surfaceLow noise high precision smooth roller bearingsQuieter and more wear resistant than standard rollers Includes: Roller wheel...

  PTFE liners for Microswiss Direct Drive Kits and All Metal Hotend (Pack of 5) Capricorn PTFE liners for Microswiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Runs between the extruder and hotend. Includes: PTFE...

  PTFE liner for Micro Swiss Direct Drive Kits and All Metal Hotend Capricorn PTFE liner for Micro Swiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Includes: PTFE tube (1 pcs) Specifications:50mm long Beveled...

Creality Silicone Pro Sock The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep filament from...

PB Select™ Silicone Socks - 3 Pack The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Tension hardware kit for Direct Drive Extruder This is a spare tension hardware kit for Microswiss Direct Drive kit for CR-10 / Ender printers.  Includes:Tension Pin (1 pcs)Spring (1 pcs)Tension Knob (1 pcs) Fits: Microswiss...

Tension lever for Micro Swiss Direct Drive Extruder This is a spare tension lever for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Includes:Lever (1 pcs)Gear (1 pcs)Shoulder bolt (1 pcs) Made in the USA

Coupler - Stepper Motor to Leadscrew Includes: Coupler (1 pcs) Size:Motor Shaft: 5mmLeadscrew: 8mm Fits:CrealityArtillery