Creator Max 2
-
(Y Axis) Creator Pro/2, Creator Max/2 Dreamer, Inventor | Used
Flashforge
Price: $7.49Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Y Axis Drive Belt Includes: Belt (1 pcs) Length: 590mm Fits:Creator ProCreator Pro 2Creator MaxCreator...Price: $7.49 -
3D Print Removal Tool - Red Handle Scraper
PB Select™
Price: $4.993D Print Removal Tool - Scraper Includes: Scraper (1 pcs)Price: $4.99 -
3D Print Removal Tool - Scraper
Flashforge
Price: $3.99Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers. Includes: Spatula (1 pcs)Price: $3.99 -
40mm Metal Fan Guard
PB Select™
Price: $1.99PB Select™ Metal Fan Guard Includes: Fan guard (1 pcs) Fits: 40x40mm fans Note: Mounting screws not includedPrice: $1.99 -
Air Duct (Left) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Now: $5.99Regular Price: $8.99Flashforge Extruder Air Duct - For LEFT EXTRUDER Directs air to the part being printed. Includes: Air Duct (1pcs) Fits:Creator Pro 2 (left extruder)Creator Max 2 (left extruder) Note: Does not include mounting screwsNow: $5.99Regular Price: $8.99 -
Air Duct (Right) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Now: $5.99Regular Price: $8.99Flashforge Extruder Air Duct - For RIGHT EXTRUDER Directs air to the part being printed. Includes: Air Duct (1pcs) Fits: Creator Pro 2 (right extruder)Creator Max 2 (right extruder) Note: Does not include mounting screwsNow: $5.99Regular Price: $8.99 -
Bed Heater Hardware | Flashforge
PB Select™
Price: $2.99Bed Heater Mounting Hardware set This hardware is for mounting the PCB bed heater to the build plate on the below listed Flashforge 3D printers. Includes:Bolts (5 pcs)Nuts (5 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer...Price: $2.99 -
Bed Leveling Bolt - 3 Pack - Creator, Dreamer, Inventor | Flashforge
Flashforge
Price: $2.49Flashforge Bed Leveling Bolt - 3 Pack Includes: Bolts (3 pcs) Fits: InventorDreamerCreator ProCreator Pro 2Creator MaxCreator Max 2 Note: Bed Leveling Nuts and Bed Leveling Springs not included.Price: $2.49 -
Bed Leveling Card | Flashforge
Flashforge
Price: $2.90Flashforge Bed Leveling Card Includes: Leveling card (1 pcs)Price: $2.90 -
Bed Leveling Thumb Nut - 3 Pack | Flashforge
Flashforge
Price: $5.99Flashforge Bed Leveling Thumb Nut - 3 Pack Includes: Thumb nut (3 pcs) Fits:InventorInventor 2Finder 2Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXPrice: $5.99 -
Belt (Short) 250mm | Flashforge
Flashforge
Price: $5.99Flashforge Timing Belt This is the short belt that runs from the Y axis stepper motor to the Y axis drive shaft Includes: Belt (1 pcs) Size: 250mm Fits: Creator ProCreator Pro2 Creator MaxCreator Max 2DreamerDreamer...Price: $5.99 -
Belt (X Axis) Creator Pro/Pro 2, Creator Max/Max 2 | Flashforge
Flashforge
Price: $7.99Flashforge Replacement Drive Belt Includes: Belt ( 1 pcs) Length: 860mm Fits: Creator ProCreator Pro 2Creator MaxCreator Max 2Price: $7.99 -
Boron Nitride Thermal Paste
PB Select™
Regular Price: $11.65 - $116.50Price: $4.99 - $49.95Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...Regular Price: $11.65 - $116.50Price: $4.99 - $49.95 -
Bracket for Top Cover - Creator Pro/2, Creator Max/2 | Refurbished
Flashforge
Price: $4.99Like New - Removed from new or lightly used printers. Flashforge Top Cover Bracket Includes:Bracket (1 pcs)Screw (1 pcs) Color: Black Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Price: $4.99 -
Brim Scraper (Mini Scraper) Black or Orange
PB Select™
Price: $1.99Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)Price: $1.99 -
Build Plate Base (Carriage) Creator Pro/2, Creator Max/2, Dreamer, Inventor | Used
Flashforge
Price: $19.95Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Build Plate Base (Carriage) This is the carriage that the build plate rides on. Includes: Build plate...Price: $19.95 -
Build Plate Flex System - Creator, Inventor, Dreamer | Flashforge
Flashforge
Price: $44.95Flashforge Flexible Spring Steel Build Plate System Includes:Flashforge print surface pre-installed (1 pcs)Magnet sheet with adhesive (1 pcs)Spring steel flexible plate print surface (1 pcs) Max Operating Temperature: 80c Fits:Creator Pro...Price: $44.95 -
Cable - PSU to Mainboard for Creator Pro 2, Creator Max 2 | Used
Flashforge
Price: $7.99Used Item Cables are removed from low hour 3D printers. Flashforge PSU to Mainboard Power Cable Includes: Power cable (1 pcs)Ferrite filter (1 pcs) Fits: Creator Pro 2Creator Max 2Price: $7.99 -
Cable - Y Motor - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $5.99Flashforge Y Motor Cable Runs from Y axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro 2Creator Max 2Price: $5.99 -
Cable - Y Motor - Creator Pro 2, Creator Max 2 | Used
Flashforge
Price: $4.99Used Item Removed from low hour 3D printer. Flashforge Y Motor Cable Runs from Y axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro 2Creator Max 2Price: $4.99 -
Cable - Z Motor - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $5.99Flashforge Z Motor Cable Runs from Z axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro 2Creator Max 2Price: $5.99 -
Cable - Z Motor - Creator Pro 2, Creator Max 2 | Used
Flashforge
Price: $4.99Used Item Removed from low hour 3D printer. Flashforge Z Motor Cable Runs from Z axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro 2Creator Max 2Price: $4.99 -
Cable for (LEFT) Extruder PCB - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $9.95Flashforge Extruder PCB Cable - Left This cable runs form the extruder to the mainboard. Includes: Cable (1 pcs) Fits: Creator Pro 2 (left extruder)Creator Pro Max (left extruder)Price: $9.95 -
Cable for (LEFT) Extruder PCB - Creator Pro 2, Creator Max 2 | Used
Flashforge
Price: $7.99Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Extruder PCB Cable - Left This cable runs form the extruder to the mainboard. Includes: Cable (1...Price: $7.99 -
Cable for (RIGHT) Extruder PCB - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $9.95Flashforge Extruder PCB Cable - Right This cable runs form the extruder to the mainboard. Includes: Cable (1 pcs) Fits: Creator Pro 2 (right extruder PCB)Creator Max 2 (right extruder PCB)Price: $9.95 -
Cable for (RIGHT) Extruder PCB - Creator Pro 2, Creator Max 2 | Used
Flashforge
Price: $9.95Used Item Cables are removed from low hour 3D printers. Flashforge Extruder PCB Cable - Right This cable runs form the extruder to the mainboard. Includes: Cable (1 pcs) Fits: Creator Pro 2 (right extruder...Price: $9.95 -
Cable for Heated Bed - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $8.99Flashforge Heated Bed Cable This cable runs from the heated bed to the mainboard. Includes: Cable (1 pcs) Fits:Creator Pro 2Creator Max 2Price: $8.99 -
Cable for Heated Bed - Creator Pro 2, Creator Max 2 | Used
Flashforge
Price: $5.99Used Item Cables are removed from low hour 3D printers. Flashforge Heated Bed Cable This cable runs from the heated bed to the mainboard. Includes: Cable (1 pcs) Fits:Creator Pro 2Creator Max 2Price: $5.99 -
Cable for TFT Touch Screen - Creator Pro 2, Max 2 | Flashforge
Flashforge
Price: $9.99Cable for Flashforge TFT Touch Screen Includes: Cable (1 pcs) Fits:Creator Pro 2Creator Max 2 WARNING Pay attention to the orientation of your current cable. Plugging this cable in backwards can...Price: $9.99 -
Driven Shaft - Y Axis - Creator Pro/2, Creator Max 2 | Flashforge
Flashforge
Price: $7.95Flashforge Driven Shaft Includes: Shaft (1 pcs) Size: 5x455mm Location: Driven Y Axis Fits: Creator ProCreator Pro 2Creator Max 2Price: $7.95 -
E Clip - 5 Pack | Flashforge
Flashforge
Price: $2.99Flashforge E-Clips For holding timing pulley to 5mm motor and axle shafts Includes: E-Clip (5pcs)Price: $2.99 -
Edge Cleanup (Deburring) Tool for 3D Prints
NOGA
Price: $13.953D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...Price: $13.95 -
Electronics Cooling Fan (40x20mm) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $12.95Flashforge 4020 Fan Cools the electronics in the bottom of the printer. Includes: Fan (1 pcs) Size: 40x40x20mm Fits:Creator Pro 2Creator Max 2Price: $12.95 -
Extruder Assembly (LEFT) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $149.95Flashforge Extruder Assembly (LH) Complete, fully assembled LEFT SIDE extruder assembly. Includes:Stepper motor (1 pcs)Heatsink (1 pcs)Fan - Heatsink (1 pcs)Fan - Print cooling (1 pcs)Fan cover (1 pcs)Extruder PCB board (1 pcs)Heat break...Price: $149.95 -
Extruder Assembly (Right) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $149.95Flashforge Extruder Assembly (RH) Complete, fully assembled RIGHT SIDE extruder assembly. Includes: Stepper motor (1 pcs)Heatsink (1 pcs)Fan - Heatsink (1 pcs)Fan - Print cooling (1 pcs)Fan cover (1 pcs)Extruder PCB board (1 pcs)Heat break...Price: $149.95 -
Extruder Lever Assembly - Left Hand | Flashforge
Flashforge
Price: $19.95Flashforge Extruder Lever Assembly - Left Side Includes:Filament leverBacking plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt (1 pcs)Spring (1...Price: $19.95 -
Extruder Lever Assembly - Left Hand | Used
Flashforge
Price: $14.95Used Item Removed from low hour 3D printers Flashforge Extruder Lever Assembly - Left Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1...Price: $14.95 -
Extruder Lever Assembly - Right Hand | Flashforge
Flashforge
Price: $19.95Flashforge Extruder Lever Assembly - Right Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt (1 pcs)Spring (1 pcs)6mm...Price: $19.95 -
Extruder Lever Assembly - Right Hand | Used
Flashforge
Price: $14.95Flashforge Extruder Lever Assembly - Right Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt (1 pcs)Spring (1 pcs)6mm...Price: $14.95 -
Extruder PCB Board (Left Side) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $9.95Flashforge Extruder PCB Board Includes: PCB Board (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: For Left Side extruder only Right side extruder PCB board available herePrice: $9.95 -
Extruder PCB Board (Right Side) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $9.95Flashforge Extruder PCB Board Includes: PCB Board (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: For right side extruder only Left side extruder PCB board available herePrice: $9.95 -
Extruder Spring | Flashforge
Flashforge
Price: $2.99Flashforge Extruder Spring Includes: Spring (1 pcs) Length: 21.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProInventorInventor 2FinderFinder 2 Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NX Monoprice...Price: $2.99 -
Extruder Top Cover (LEFT) for Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $7.95Extruder Cover - LEFT SIDE Top cover for the right extruder. Holds the wire harness in place. Includes: Plastic cover (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Mounting hardware not includedPrice: $7.95 -
Extruder Top Cover (RIGHT) for Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $7.95Extruder Cover - RIGHT SIDE Top cover for the right extruder. Holds the wire harness in place. Includes: Plastic cover (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Mounting hardware not includedPrice: $7.95 -
Fan (40x10mm) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $9.95Flashforge 4010 Fan Includes: Fan (1 pcs) Voltage: 24VDC Size: 40x40x10mm Fits: Creator Pro 2Creator Max 2Price: $9.95 -
Fan for Print Cooling (35x10mm) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $9.95Flashforge 3510 Blower Fan Cools the part being printed Includes: Fan (1 pcs) Voltage: 5 VDC Size: 35x35x10mm Fits: Creator Pro 2Creator Max 2Price: $9.95 -
Filament Drive Gear - Hardened Steel | Flashforge
Flashforge
Price: $11.95Flashforge Hardened Steel Filament Drive (Extruder) Gear Hardened steel for longer life when printing abrasive materials such as Carbon Fiber Nylon Includes:Hardened steal filament drive gear (1 pcs)Set screw (1 pcs) Fits:Guider 2S HTGuider...Price: $11.95 -
Filament Drive Gear - Standard | Flashforge
Flashforge
Price: $7.95Flashforge Filament Drive (Extruder) Gear Includes:Standard filament drive gear (1 pcs)Set screw (1 pcs) Fits:Adventurer 3Adventurer 4Creator 3Guider 2S HTGuider 2InventorInventor 2/SFinderFinder 2Creator ProCreator Pro 2Creator MaxCreator Max...Price: $7.95 -
Filament Guide Tube - Creator Pro/Pro 2, Creator Max/Max 2 | Flashforge
Flashforge
Price: $8.95Flashforge Filament Guide Tube Includes: Guide tube (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Price: $8.95 -
Filament Guide Tube - Creator Pro/Pro 2, Creator Max/Max 2 | Used
Flashforge
Price: $8.95Flashforge Filament Guide Tube Includes: Guide tube (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Price: $8.95 -
Filament Tension Lever - Right Side | Flashforge
Flashforge
Price: $4.95Flashforge Filament Tension Lever Includes: Plastic lever (1 pcs) Fits:Adventurer 3Adventurer 4Dreamer (Right Side)Dreamer NXCreator Pro (Right Side)Creator Pro 2 (Right Side)Creator Max (Right Side)Creator Max 2 (Right Side)Creator...Price: $4.95 -
Flange Bearing (5x10mm) Creator Pro, Dreamer, Inventor, Guider, E3 Pro | Flashforge
Flashforge
Price: $2.99Flashforge Flange Bearing (F105ZZ) Includes: Flange bearing (1 pcs) Specifications:ID: 5mmOD: 10mmW: 4mmF: 11.5mm Fits:DreamerDreamer NXCreator ProCreator Pro 2Creator MaxCreator Max 2InventorInventor 2Guider 2Guider 2S HTRobo E3 ProPrice: $2.99 -
Flashforge Back Logo Plate for Print Bed | Used
Flashforge
Price: $3.99Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Bed Back Bracket Cosmetic back bracket for Build plate carriage, Flashforge Logo. Includes: Bracket (1...Price: $3.99 -
Flashforge Bed Leveling Thumb Nuts and Springs - 3 Pack | Used
Flashforge
Price: $4.95Used Item removed from low hour 3D printers. Flashforge Bed Leveling Thumb Nut and Spring - 3 Pack Includes: Thumb Nut (3 pcs)Spring (3 pcs) Fits:InventorInventor 2Finder 2Creator ProCreator Pro 2Creator MaxCreator...Price: $4.95 -
Flashforge Belt (Short) 250mm | Used
Flashforge
Price: $5.99Used Item Removed from low hour 3D printers. Flashforge Timing Belt This is the short belt that runs from the Y axis stepper motor to the Y axis drive shaft Includes: Belt (1 pcs) Size: 250mm Fits: Creator...Price: $5.99 -
Flashforge Screwdriver - Phillips Head
Flashforge
Price: $1.99Small Phillips Head Screwdriver This is the small screwdriver that comes with the accessory kit of many new Flashforge 3D printers Includes: Screwdriver (1 pcs)Price: $1.99 -
Flexible Build Plate - Textured PEI - 154*232mm | Creator Pro/2, Creator Max/2, Dreamer, Inventor
PB Select™
Price: $32.95DFlex™ Flexible Build Plate - Single sided textured PEI powder coated This build plate allows you the option of having two print surfaces on one build plate. Made from heavy gauge flexible steel.Side one is PEI powder coated. The Powder...Price: $32.95 -
Flush Cut Trimmer (Side Cutters)
PB Select™
Price: $4.99Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints. Includes: Trimmers (1 pc)Price: $4.99 -
Front Door - Creator Pro/Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $24.95Acrylic Front Door Includes:Front door (1 pcs) Magnets (2 pcs) Fits:Creator ProCreator Pro 2Creator Max 2Price: $24.95 -
Front Door - Creator Pro/Pro 2, Creator Max 2 | Used
Flashforge
Price: $19.95Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Acrylic Front Door Includes:Front door (1 pcs) Magnets (2 pcs) Fits:Creator ProCreator Pro 2Creator Max 2Price: $19.95 -
Grease Packet - 3 Grams | Flashforge
Flashforge
Price: $2.99Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)Price: $2.99 -
Heat Break (Threaded Pipe) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $14.95Flashforge Heat Break (Thermal Break) Includes: Heat break (1 pcs) Fits: Creator Pro 2Creator Max 2Price: $14.95 -
Heated Build Plate Assembly - Creator Pro/2, Creator Max/2, Dreamer, Inventor | Flashforge
Flashforge
Price: $79.95Heated Build Plate Assembly Comes fully assembled with print surface installed. Includes:Build plate platform (1 pcs)Build plate heater (1 pcs)Print surface (1 pcs) Fits: Creator Pro 2Creator Max 2Creator ProCreator MaxDreamerDreamer...Price: $79.95 -
Heater Block - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $14.95Flashforge Heater Block Includes: Heater block (1 pcs) Fits: Creator Pro 2Creator Max 2 Note: Clamping screws not included. Click here if you need the clamping screws.Price: $14.95 -
Heater Block Clamping Screws - Guider 2S HT, Creator Pro 2/Max 2, Robo E3 Pro | 4 Pack
PB Select™
Price: $1.99Socket Head Cap Screw - Low Head - Stainless Steel Used to clamp the heater cartridge in the heater block Includes: Socket Head Cap Screw - Low Head (4 pcs) Size: M3x8 Fits:Guider 2S HTCreator Pro 2Creator Max 2Robo E3 ProPrice: $1.99 -
Heater Cartridge - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $14.95Flashforge Hotend Heater Cartridge Includes: Heater cartridge (1 pcs) Fits:Creator Pro 2Creator Max 2Price: $14.95 -
Heatsink - Hotend Mounting Block for Creator Pro 2 - Left Side | Flashforge
Flashforge
Price: $29.95Flashforge Heatsink - LEFT SIDE Includes: Heatsink (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Does not include set screw. Available here: Setscrew for FlashforgePrice: $29.95 -
Heatsink - Hotend Mounting Block for Creator Pro 2 - Right Side | Flashforge
Flashforge
Price: $29.95Flashforge Heatsink - RIGHT SIDE Includes: Heatsink (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Does not include set screw. Available here: Setscrew for FlashforgePrice: $29.95 -
Hotend Assembly (Left Side) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $49.95Flashforge Hotend Assembly Come fully assembled ready to install. Includes:Heat break (1 pcs)Heater block (1 pcs)Thermocouple (1 pcs)Heater cartridge (1 pcs)Nozzle (1 pcs) Fits: Creator Pro 2 (Left side) Creator Max 2...Price: $49.95 -
Hotend Assembly (Right Side) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $49.95Flashforge Hotend Assembly Come fully assembled ready to install. Includes:Heat break (1 pcs)Heater block (1 pcs)Thermocouple (1 pcs)Heater cartridge (1 pcs)Nozzle (1 pcs) Fits: Creator Pro 2 (Right side) Creator Max 2...Price: $49.95 -
Hotend Screws for Creator Pro 2, Creator Max 2
PB Select™
Price: $3.99Hotend Screw Assortment A selection of screws for the extruder assembly. Notes: This is a selection and not a complete replacement set.Color of screws may be different than shown. Fits:Creator Pro 2Creator Max 2 Includes:M3x16 socket head cap...Price: $3.99 -
LED Board (Light Strip) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $12.95LED Board - Light Strip for Flashforge 3D Printers Includes: LED light strip (1 pcs) Fits:Creator Pro 2Creator Max 2Price: $12.95 -
Limit Switch (Left Extruder) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $9.95Flashforge X Axis Limit Switch For left extruder only Includes: Limit switch (1 pcs) Fits:Creator Pro 2Creator Max 2 Creator Pro 2 Right Extruder Limit Switch available herePrice: $9.95 -
Limit Switch (Right Extruder) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $9.95Flashforge X Axis Limit Switch For right extruder only Includes: Limit switch (1 pcs) Fits:Creator Pro 2Creator Max 2 Creator Pro 2 Left Extruder Limit Switch available herePrice: $9.95 -
Limit Switch - Creator Pro/2/ Creator Max/2, Dreamer, Inventor 2/S, Finder 3 | Flashforge
Flashforge
Now: $6.95Regular Price: $8.95Flashforge Limit Switch Includes: Limit Switch (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Finder 3Inventor 2Inventor 2S Fitment Note: Fits different locations on different printers. Make sure the switch...Now: $6.95Regular Price: $8.95 -
Linear Bearing LM8SUU (4 Pack) | MYT
MYT®
Price: $13.95MYT LM8SUU Linear Bearings for Flashforge and other 3D Printers Includes: Bearing (4 pcs) Specifications:ID: 8mmOD: 15mmL: 17mm Fits:Creator ProCreator pro 2Creator MaxCreator Max 2DreamerDreamer NXInventorInventor 2FinderFinder...Price: $13.95 -
Linear Rod - X Axis - Creator Pro/2, Creator Max 2 | Flashforge
Flashforge
Price: $7.95Flashforge Linear Rod Includes: Rod (1 pcs) Location: X axis Fits: Creator ProCreator Pro 2Creator Max 2Price: $7.95 -
Linear Rod - Y Axis - Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
Price: $7.95Flashforge Linear Rod Includes: Linear rod (1 pcs) Location: Y axisSize: 8x310mm Fits: Creator ProCreator Pro 2Creator MaxCreator Max 2Price: $7.95 -
Linear Rod - Z Axis (2 pack) Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
Price: $19.95Flashforge Linear Rod Includes: Linear rod (2 pcs) Size: 10x352mm Location: Z axis Fits:Creator ProCreator Pro 2Creator Max Creator Max 2Price: $19.95 -
M3x16 Socket Head Cap Screw - 4 Pack
PB Select™
Price: $1.99Socket Head Cap Screw - 4 pack Size: M3x16 Includes: M3x16 socket head cap screw (4 pcs) Used in the following locations on the printers listed below:Extruder to carriageFan to heatsinkStepper motor mounting. Fits:Creator Pro 2Creator Max 2Price: $1.99 -
Magnet for Flexible Build Plate - 154*232mm | Creator Pro/2, Creator Max/2, Dreamer, Inventor
PB Select™
Price: $9.95Replacement Magnet sheet for 154*232mm DFlex™ Build Plate Includes: Sheet magnet with adhesive backing (1 pcs) Size: 154*232mmMax temperature: 90c Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2InventorDreamerDreamer NXPrice: $9.95 -
Mainboard - Creator Max 2 | Flashforge
Flashforge
Price: $199.95Please read our returns policy regarding electronic items Flashforge Creator Max 2 Mainboard This board is also known as the motherboard or control board. Fits: Creator Max 2Price: $199.95 -
Microswiss Nozzle - Creator Pro 2, Creator Max 2
Microswiss
Price: $14.99Microswiss Plated Wear Resistant Nozzle This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of...Price: $14.99 -
Motor Drive Pulley (Gray) | Flashforge
Flashforge
Price: $6.95Timing Belt (Motor) Drive Pulley This is the drive pulley that is used on many Flashforge 3D printers. Includes:Pulley (1pcs)Pulley disc (1 pcs)E-clip (1 pcs) Fits:Adventurer 3Adventurer 4Creator ProCreator Pro 2Creator MaxCreator Max 2Creator...Price: $6.95 -
Motor Mount (Y Axis) Finder, Inventor 2, Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
Price: $6.95Flashforge Motor Mount Includes: Motor mount (1 pcs) Location: Y Axis Motor Fits:FinderFinder 2Inventor 2Creator ProCreator Pro 2Creator MaxCreator Max 2Price: $6.95 -
Nozzle - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $12.95Flashforge Brass Nozzle Size: (Select Above) Includes:Brass nozzle (1 pcs)PTFE tube (1 pcs) Fits:Creator Pro 2Creator Max 2Price: $12.95 -
Nozzle Coat | 4ml
PB Select™
Price: $14.99Nozzle Coat™ Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...Price: $14.99 -
Ooze Plate - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $7.95Flashforge Ooze Plate Fits: Creator Pro 2Creator Max 2 Note: Mounting hardware not includedPrice: $7.95 -
Power Cord - NEMA 5-15P to EIC (PC Type)
PB Select™
Price: $4.95Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet Includes: Power cord (1 pcs) Note: Power supply is not includedPrice: $4.95 -
Power Inlet (switch) with Fuse | Flashforge
Flashforge
Price: $7.99Flashforge Power Inlet & On/Off Switch Includes:Power inlet with switch (1 pcs)Fuse (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Guider 2SRobo E3 ProPrice: $7.99 -
Power Inlet (switch) with Fuse | Used
Flashforge
Price: $5.99Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Power Inlet & On/Off Switch Includes:Power inlet with switch (1 pcs)Fuse (1 pcs) Fits:Creator ProCreator...Price: $5.99 -
Power Supply - Creator Pro/2, Creator Max/2, Dreamer, Inventor | Flashforge
Flashforge
Price: $69.95Flashforge Replacement Power Supply Includes: Power supply unit (1 pcs) Fits:Creator ProCreator Pro 2Creator Max Creator Max 2DreamerDreamer NXInventorPrice: $69.95 -
Print Surface (Bed Tape) Creator, Dreamer, Inventor | Flashforge
Flashforge
Price: $13.80Flashforge Print Surface Bed Tape Adhesive backed for easy application Includes: Print surface (1 pcs) Size: 153x232mm (can be cut to fit other printers) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Inventor (for Inventor 2 bed tape...Price: $13.80 -
PTFE Tube for Nozzle - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $1.99Flashforge PTFE Tube for Nozzle This is the PTFE tube that goes inside the nozzle. Includes: PTFE tube (1 pcs) Fits:Creator Pro 2Creator Max 2Price: $1.99 -
Pulley & Bracket Kit ( Front 2 Corners) Creator Pro, Pro 2, Creator Max, Max 2 | Used
Flashforge
Price: $19.95Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Pulley Bracket Front Kit Holds Y axis rod in place Includes:Bracket (2 pcs)Idler Pulley Assembly (2 pcs) Location:Left...Price: $19.95 -
Pulley Assembly (Idler) X-Axis - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Now: $7.95Regular Price: $9.95Flashforge Idler Pulley Assembly Includes: Idler pulley assembly (1 pcs) For: X-Axis Fits: Creator Pro 2Creator Max 2Now: $7.95Regular Price: $9.95 -
Pulley Assembly (Idler) X-Axis - Creator Pro 2, Creator Max 2 | Used
Flashforge
Price: $6.95Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Idler Pulley Assembly Includes: Idler pulley assembly (1 pcs) For: X-Axis Fits: Creator Pro 2Creator Max...Price: $6.95 -
Pulley Assembly (Idler) Y-Axis - Creator Pro/2, Creator Max 2 | Flashforge
Flashforge
Price: $12.95Flashforge Idler (Driven) Pulley Assembly Center shaft is about 37mm long Includes: Pulley assembly (1 pcs) Location: Y-Axis Fits:Creator ProCreator Pro 2Creator Max 2Price: $12.95 -
Set Screw - M4X4 - Cup Point | 12.9 Grade
PB Select™
Price: $0.79M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...Price: $0.79 -
Spool Holder - Creator Pro, Guider 2, Guider 2S HT, Robo E3 Pro | Flashforge
Flashforge
Price: $9.95Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Robo E3 Pro Guider 2S HT (with rectangular opening for spool holder)Price: $9.95