Creator Max

  Flashforge Spring Includes: Spring (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2InventorInventor 2

  Flashforge E Axis Stepper Motor Includes: Stepper motor (1 pcs) Location: Extruder Fits:Creator ProCreator Max

  Flashforge Stepper Motor - X/Y Axis Includes: Stepper Motor (1 pcs) Location: X or Y axis Fits:Creator ProCreator Pro 2 Creator MaxCreator Max 2 DreamerDreamer NXInventor

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Z Motor with Leadscrew (No Nut) Fitment Note: Some older Creator Pro printers use the Dreamer Z motor/lead...

  Flashforge Z Motor with Leadscrew & Nut Fitment Note: Some older Creator Pro printers use the Dreamer Z motor/lead screw, which is a little bit shorter. Please check that your current leadscrew matches the picture...

Super Lube® 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality grease...

Super Lube® 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease. Includes: 1...

  Flashforge Thermocouple Includes: Thermocouple (1 pcs) Specs:Stud: M4Wire length: 1.15 meter Fits: Creator Max

Gates GT2 6MM Belt Sold in lengths of 1 meter Belt width: 6mm The length of the belt you receive will be the quantity you order x1 meter. So, if you order a quantity of 4 you will receive one 4 meter belt.

 Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Touch Screen Includes: Touch Screen (1 pcs) Fits:InventorCreator MaxDreamerDreamer NX Note: Does not come...

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

  Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)

  Flashforge Extruder V Bearing Includes: V bearing (1 pcs) Specifications:ID: 3mmOD: 12mmW: 4mmG: 9.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProCreator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2Guider 2Guider...

  Flashforge WIFI Board Includes: WIFI board (1 pcs) Fits:Creator MaxInventorDreamerDreamer NX

  Flashforge Wrench  For the heat break on some Flashforge 3D printers Includes: Wrench (1 pcs) Size: 6mm Fits:InventorDreamerDreamer NXCreator ProCreator Max Note This is not a nozzle wrench. Nozzle wrench available here. 

   Used Item:  Removed from low hour 3D printers. Flashforge Stepper Motor - X/Y Axis (Read fit section below) Good quality Moons stepper motors with low hours.  Includes: Stepper motor (1 pcs)Drive pulley (1...

   Used Item:  Removed from low hour 3D printers. Flashforge Stepper Motor - X/Y Axis (Read fit section below) Good quality Moons stepper motors with low hours.  Includes: Stepper motor (1 pcs)Drive pulley (1...

  Y Axis Carriage Bracket - LEFT SIDE ONLY This is the bracket that snaps onto the Y axis linear bearings. The idler pulley and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator ProInventorInventor...

Y Axis Carriage Bracket - RIGHT SIDE (Motor Side) This is the bracket that snaps onto the Y axis linear bearings. The motor, limit switch and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator...