Galaxy PLA - Dark Blue - 1.75mm | PolyLite™

Polymaker PolyLite Galaxy PLA

Color: Galaxy Dark Blue (HEX Code - ⌗2A2036)
Diameter: 1.75mm
Weight: 1kg

*Color Note: Galaxy colors contain metallic-looking flakes to give a sparkling galaxy look. 

Print Settings

Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
Nozzle: 190˚C – 230˚C
Bed: 25˚C – 60˚C
Fan Speed: 100%
Print Speed: 40mm/s – 60mm/s
Print Surface: Glass with glue, Blue Tape, BuilTak®
Drying Settings: 55˚C for 6h
Recommended Support Materials: PolySupport™ or PolyDissolve

Mechanical Properties
Young’s Modulus: 2636 ± 330 Mpa
Tensile Strength: 46.6 ± 0.9 Mpa
Bending Strength: 85.1 ± 2.9 Mpa
Charpy Impact Strength: 2.7 ± 0.2 kJ/m2

Thermal Properties
Glass Transition Temperature: 61˚C
Vicat Softening Temperature: 63˚C
Melting Temperature: 150˚C

PolyLite™ PLA Technical Data Sheet

PolyLite™ PLA features Jam-Free™ technology:

Jam-Free™ technology improves the heat stability of Polymaker’s PLA filaments with softening temperatures over 140 °C. As a result, Polymaker’s PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality with less risk of nozzle jams.