Guider 2

Spatula for removing 3D prints from the build surface. his is the same tool that is provided with all new Flashforge 3D printers. 

Flashforge Extruder Air Duct Directs air to the part being printed Fits: Guider 2 Air Duct only, does not include mounting screws

Micro Swiss All Metal Hotend Kit for Flashforge Finder/Inventor 2/Guider 2, 2S /Dremel 3D40 This is an all metal hotend upgrade kit for Flashforge Finder, Inventor 2 and Guider 2 printers Micro Swiss' all metal hotend allows you to print at much higher...

Flashforge V Bearing  Fits: Adventurer 3 Creator 3 Creator Pro/Max Dreamer Dreamer NX Finder 2.0 Guider 2 Guider 2S HT Inventor Inventor 2 Sold in units of 1

Flashforge Bed Leveling Hardware  For leveling the build plate.  Includes 3x Springs 3x Nuts Fits:  Creator 3 Guider 2 Guider 2S HT  

Flashforge Servo Assembly Fits:  Guider 2 Guider 2S

Flashforge PCB Build Plate Heater Fits: Guider 2 Guider 2S HT

Flashforge Bed Leveling Sensor Switch This is the sensor only and does not include the arm or servo.  Fits: Guider 2 Guider 2S HT Finder 2 Inventor 2 Inventor 2S

Button for Touch Screen Fits: Finder Finder 2 Inventor 2 Guider 2 Guider 2S

Flashforge Filament Sensor Cable Fits: Guider 2 Guider 2S HT

Flashforge Ceramic Eye Sold in units of one Fits: Adventurer 3 Guider 2 Guider 2S

Flashforge Extruder Adapter Board Fits: Guider 2 Guider 2S

Flashforge Guider 2 Extruder Assembly Includes hotend assembly. Fits: Guider 2

Flashforge Extruder Flat Cable Fits: Creator 3 Guider 2 Guider 2S HT 

Left Side Filament Extruder Lever Assembly for Flashforge Includes: Filament lever Backing plate assembly Grove bearing Grove bearing retaining plate Shoulder bolt Spring 6mm flat head mounting screw Filament drive gear Set...

Flashforge Extruder Spring Length: 21.5mm Fits: Adventurer 3 Creator 3 Inventor Inventor 2 Finder Creator Pro Creator Pro 2 Creator Max Dreamer Dreamer NX  Also Compatible with: MP Voxel Robo E3  

Flashforge 30x10mm Fan 24V, XH2 Connector Fits: Adventurer 3 Guider 2

Flashforge Filament Drive (Extruder) Gear Hardened steel for longer life when printing abrasive materials such as Carbon Fiber PETG M4x4 Set screw included Fits: Creator 3 Guider 2S HT Guider 2 Inventor Finder Finder 2 Creator Pro Creator...

Flashforge Filament Drive (Extruder) Gear Set screw included Fits: Creator 3 Guider 2S HT Guider 2 Inventor Finder Finder 2 Creator Pro Dreamer Dreamer NX

Flashforge Filament Guide Tube Fits:  Guider 2 Guider 2S HT

Filament Sensor Board Fits: Guider 2  

Flashforge Heat Break (Threaded Pipe)  Fits: Finder 2.0 Inventor 2 Guider 2

Micro Swiss Heat Break (Thermal Tube) for All Metal Hotend Kit  Fits: Finder Inventor 2 Guider 2

Flashforge Heater Block  Fits: Guider 2 Finder 2 Inventor 2

Flashforge Heater Cartridge - 24v 40w  Fits: Finder 2 Guider 2 Guider 2s HT Inventor 2  

Flashforge Heatsink Includes heatsink only Fits: Guider 2

Flashforge Sensor Switch For the X, Y or Z Axis Fits: Guider Guider 2S HT Inventor

Flashforge Guider 2 Mainboard Fits: Guider 2  

MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.20mm Please note: The 0.20mm nozzles have no markings to indicate the size Fites: Flashforge Guider 2 (not high tamp version) Flashforge Inventor Flashforge Inventor 2S FlashForge...

MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.40mm Fites: Flashforge Guider 2 (not high tamp version) Flashforge Inventor Flashforge Inventor 2S FlashForge Creator Pro/Max FlashForge Dreamer/NX FlashForge Finder Qidi Tech...

MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.60mm Fites: Flashforge Guider 2 (not high tamp version) Flashforge Inventor Flashforge Inventor 2S FlashForge Creator Pro/Max FlashForge Dreamer/NX FlashForge Finder Qidi Tech...

MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.80mm Fites: Flashforge Guider 2 (not high tamp version) Flashforge Inventor Flashforge Inventor 2S FlashForge Creator Pro/Max FlashForge Dreamer/NX FlashForge Finder Qidi Tech...

MK10 H4 Hardened Steel Nozzle from Performance 3D  Orifice size: 0.40mm For PTFE lined hotends This wear-resistant, high lubricity nozzle is suited for any printer that uses an MK10 nozzle. These nozzles are manufactured using heat-treated A2...

MK10 H6 Hardened Steel Nozzle from Performance 3D  Orifice Size: 0.60mm For 1.75mm diameter filament Sold in units of 1 For PTFE lined MK10 hotends only  This wear-resistant, high lubricity nozzle is suited for any printer that uses an...

Flashforge Brass Nozzle Orifice Size: 0.40mm Please note: PTFE tube not included - Search our site for the proper PTFE tube for your printer. Fits: Guider 2 (not for HT version) Inventor Inventor 2 Finder Finder 2.0 Dreamer Dreamer...

Flashforge Replacement Power Supply Quality OEM power supply. Fits:  Creator 3 Guider 2 Guider 2S HT NOTE: Item may differ from picture

Flashforge Bed Surface Tape Adhesive backed for easy application Size: 263x307mm (can be trimmed to fit other printers) Fits: Guider Series Sold in units of 1

Flashforge PEI Bed Surface Tape Adhesive backed for easy application Size: 263x307mm (can be trimmed to fit other printers) Fits: Guider Series Sold in units of 1

Flashforge Extruder/Nozzle PTFE Tube   Fits: Guider 2  

Flashforge Idler Pulley Assembly For: X-Axis Fits: Guider 2 Guider 2S HT